Showing recent results 1456 - 1470 of 3242 products found.
-
FluidScan® 1000 Series - Spectro Scientific
The FluidScan® 1000 series handheld Infrared oil analyzer provides direct quantitative measurement of a lubricant’s condition and plays an important role in Machine Condition Monitoring (MCM) for proactive and predictive maintenance in Reliability Management programs. It determines when oil needs to be serviced due to degradation of the oil chemistry or contamination by other fluids such as water or the wrong oil. It is compliant with ASTM D7889 “Standard Test Method for Field Determination of In-Service Fluid Properties Using IR Spectroscopy”.
-
CX3300 Series - Keysight Technologies
The mainframes of CX3300 series of Device Current Waveform Analyzers captures measured current waveforms by the Current Sensors with a maximum of 200 MHz wide bandwidth and a maximum of 1 GSa/s fast sampling rate. The data acquisition is done by 14-bit or 16-bit by just selecting the "High Speed Mode" or "High Resolution Mode" from the front panel. To maintain the low noise current sensing capabilities of the Current Sensors, the mainframes are also designed to minimize the noise even under such wide measurement bandwidth.
-
IBEKO Power AB
CAT circuit breaker analyzers and timers are advanced standalone or a PC controlled instruments for circuit breaker maintenance. Typical application areas of CAT instruments are medium and high voltage substations at electric power generation, transmission, and factories of switchgear. Also, industrial environments and electric power distribution are suitable application areas for these circuit breaker testing instruments.DV Power CAT circuit breaker testing instruments are portable and lightweight. They are designed for performing mechanical operations intended for circuit breakers testing according to standards IEC 62271-100 and IEEE C37.09.These instruments measure:the timing of main contacts, pre-insertion resistor contacts, auxiliary contacts operations,coil currents,motion parameters,voltage recording,main circuit resistance,arcing contacts wipe,and any relevant analog signal.Motion transducer channels provide measuring a displacement of the circuit breaker moving parts, contact wipe, over-travel, rebound, damping time, and average velocity. Even more, CAT circuit breaker analyzer optionally has a built-in micro-ohmmeter. Hence, it provides the main circuit resistance measurement and dynamic resistance measurement. Dynamic resistance measurement is an effective method for arcing contacts condition assessment.
-
PTT-Series - Mountz Inc.
The PTT torque meter makes quality documentation faster and easier. As an advanced torque controlling, monitoring and documentation solution, the torque analyzer enables operators and engineers to ensure product quality, safety and reliability promptly in a variety of manufacturing environments. The portable torque meters are designed for measuring torque, torque calibration, joint testing, auditing or force and load measurement. The failure of a three-cent fastener that isn’t properly tightened can lead to catastrophic or latent failures. Using a quality torque tester makes a safer world through accuracy and precision.
-
DigiTMR S2 - Manta Test Systems
The Vanguard DIGITMR S2 is an inexpensive, easy to use digital circuit breaker analyzer. The DIGITMR S2 can be operated stand-alone or can be computer-controlled. It can fully analyze a circuit-breaker’s performance by testing the contact time, stroke, velocity, over-travel, and contact wipe. Contact and motion analysis can be performed for all breaker contact operations (Open, Close, Open – Close, Close – Open, and Open – Close – Open). Timing results are recorded and displayed on the 240 x 128 pixels back-lit LCD screen and can also be printed on the built-in 4.5″ wide thermal printer.
-
Falcon G300/G350 - Protocol Insight
The Falcon G300 series with Trace Validation provides complete protocol debug and analysis of UFS and UniPro devices. The G300 series supports MIPI M-PHY v3.1 HS-G3, UniPro v1.61, and UFS2.0/2.1, and is HS-G4 ready. It is available as an Analyzer or an Exerciser/Analyzer with the following features: Trace Validation™ provides complex state-machine analysis of protocol sequences and packet characteristics in captured traces. Event view window displays a comprehensive overview of all events on the bus, including fillers, trig packets, SOB and EOB packets, etc.
-
Keysight Technologies
As new wireless, communication, and defense technologies increasingly make use of wider bandwidths, traditional RF and microwave frequency bands are often too crowded with existing transmitters and interfering signals to accommodate these new wideband services. This has led designers to move to higher frequency bands, where there is less interference and that can support wide bandwidth signals. Keysight Technologies offers a wide selection of accessories to extend the frequency range of our signal analyzers, making it more convenient that ever to make accurate measurements at millimeter frequencies.
-
LTT-Series - Mountz Inc.
The torque analyzer is designed for calibrating tools, joint testing, auditing and measuring torque. Torque tools go out of calibration with use. To maintain consistent accuracy, torque tools must be checked periodically for wear or defective parts. A power or hand torque tool is a measuring tool that must be properly calibrated and maintained. The LTT-Series is an advanced torque testing and documentation solution. Using a quality torque tester makes a safer world through accuracy and precision. Controlling torque is essential for companies to ensure their product’s quality, safety and reliability isn’t compromised.
-
CA9036 - UC Instruments, Corp.
CA9036 laser sweep optical spectrum analyzer is special design for 1 X 9 50 GHz and 100 GHz WSS(wavelength select switch) components optical parmeters automatic testing. CA9036 can process insertion loss, ER, ripple, attenuation accuracy, port isolation, ITU center wavelength tolorance, PDL parmeter automatic testing. Build-in high speed, high accuracy sweep laser provides high accuracy lightsource and performance hig speed swept testing function. It also can process other passive components test and spectrum analyze.
-
PXIe-5668 / 783156-01 - NI
Up to 26.5 GHz PXI Vector Signal Analyzer—The PXIe‑5668 offers wide bandwidth with high-performance measurement performance and speed. It meets the challenging requirements of applications such as wireless communications, radio frequency integrated circuit characterization, RADAR test, and spectrum monitoring and signal intelligence. With its implementation as a PXI instrument, the PXIe‑5668 also features the fast measurement speed required for high-volume manufacturing test. The PXIe‑5668 includes a LabVIEW-programmable Xilinx Kintex‑7 FPGA that you can use to customize the instrument behavior by adding triggering, signal processing routines, and more.
-
PXA-1000 - General Photonics Corp.
The PXA-1000 Distributed Polarization Crosstalk (X-Talk) Analyzer is an enhanced white light interferometer that measures space-resolved stress by analyzing stress-induced polarization cross-coupling along a length of polarization maintaining (PM) fiber. The patented design eliminates strong zero-order interference and reduces the multi-coupling interference common in traditional white light interferometers, both of which can cause “ghost” peaks in the measured signal. The removal of the “ghost” peaks enables the PXA-1000 to unambiguously identify the magnitudes and locations of actual x-talk peaks, resulting in higher measurement sensitivity, higher dynamic range, and higher spatial measurement accuracy.
-
DS2831 - Deviser Instruments
Fast Spectrum Analyzer: detect and troubleshoot ingress with exceptional sensitivity of -60dBmV @ 300KHz RBW. Color-Coded Persistence Test: find transient noise hiding under upstream bursty signaling, without disrupting service. MER Measurement: up to 47 dB MER with 48 hours of statistical recording with 1 second resolution. Analog TV and SC-QAM: troubleshoot typical analog interference and distortions as well as SC-QAM performance. Time-Domain EVS Measurements: uncover interference from LTE signals under downstream QAM carriers with no service interruptions.Characterize OFDM carrier performance and DOCSIS 3.1 cable modem performance.
-
CBT-7500 - Amperis sl
The CT-6500 S2 is an inexpensive, easy to use, stand-alone, microprocessordriven EHV circuit-breaker analyzer. The CT-6500 S2 is available in models with either 3 (CT-6500-3 S2), 6 (CT-6500-6 S2), or 12 (CT-6500-12 S2) drycontact inputs. The CT-6500 S2 can fully analyze a circuit-breaker's performance by testing the contact time, stroke, velocity, over-travel, and contact wipe. Contact-motion analysis can be performed for all breaker contact operations (Open, Close, Open – Close, Close – Open, and Open – Close – Open). The CT-6500 S2's timing window is selectable between 1-second, 10-second, or 20- second periods.
-
CT-7000 S3 - Manta Test Systems
The CT-7000 S3 is Vanguard’s fourth generation EHV circuit breaker analyzer. The CT-7000 S3 is available with 3 (part number 9021-UC) or 6 contact timing channels (part number 9100-UC). The CT-7000 S3 can fully analyze a circuit breaker’s performance by measuring the main contact and resistor contact time, stroke, velocity, over-travel, bounce back and contact wipes. Both contact and motion analysis can be performed on all circuit breaker operations (OPEN, CLOSE, OPEN-CLOSE, CLOSE-OPEN, and OPEN CLOSE-OPEN). The CT-7000 S3’s timing window is selectable between 1 second, 10 seconds, and 20 seconds.
-
DT250 - Mirmorax AS
The portable instrument, based on Mirmorax’s third generation ultrasonic technology, provides efficient, flexible and highly accurate sample analysis as well as live measurements of oil and solids in produced water. For operators, this will lead to improved monitoring capabilities and the flexibility to de-bottle neck various parts of the processing system. This will bring new value and optimization possibilities to existing separators and filters, enable targeted use of chemicals, and ensure the meeting of all environmental requirements. The Desktop Oil-in-Water Analyzer will also be particularly suited to challenging fields that host separation from different tie-backs with various oil types in the same produced water.
