Product

Meter Test Station

WECO 8000

-

Radian Research, Inc.

WECO 8000 - Radian Research, Inc.

The innovative WECO 8000 Meter Test Station is the first of its kind – a multi-position test board integrating meter qualification and accuracy. This versatile and economic test station is the solution for utilities needing the ability to switch between functional testing and accuracy testing. Separate multi-position test boards are no longer a necessity.

Product

192 Channel Power Supply

HDPMU

-

Salland Engineering

HDPMU - Salland Engineering

Today cost efficiency is more important than ever. Many manufacturers are working on maximizing multi-site testing. Often maximization can’t be done because of limited tester resources. Salland’s HDPMU gives you up to 192 additional independent parametric measurement units (PMU) channels on a single board. Our solution will increase parallel testing without the need for creating complex device interface board (DIB). It can be used for continuity, functional or parametric tests or simply for device setup or loading. Full integration with the Teradyne IG-XL™ Software, easy set-up and high parallel measurement capability will reduce test costs significantly.

Product

Reliability Testing

-

ELES Semiconductor Equipment SpA

ELES Semiconductor Equipment SpA

ELES designs and manufacturers reliability test solutions to verify the performance of integrated circuits from concept validation to high volume production during all the test phases. No other company can provide universal equipment for all the reliability tests,  or can guarantee a seamless data flow between phases or can apply on chip embedded reliability engineering for data tracking and failure investigation. Clients use our functional test data to proactively analyse variations between lots, between temperature extremes  and during lifetime (often these defects escape ATE).  The improvements to products and processes needed to arrive at zero defects  cannot be driven by the quantity of Big Data alone, the quality of reliability data is a strategic advantage that only ELES can provide.

Product

Pocket Color Temperature Meter

CHROMA-1

-

Lisun Electronics Inc.

CHROMA-1 - Lisun Electronics Inc.

• Measure Pa rameters: CCT, Chromaticity Coordinate(x, y, u, v) • Display range: 1500K~25000K, Resolution: 1K • Accuracy: 0.5%F.S. • Luminance test function (lx test)

Product

Non-functional Testing Services

-

QACraft

QACraft

Good software has both- efficient functionality and excellent performance. While functional testing pays attention to improve the functioning of the software, our non-functional testing solutions aids in enhancing software performance under various conditions. QACraft has helped several enterprises all over the globe to boost performance by evaluating the software when it comes to software and eradicating the lacking factors from it. Carrying out non-functional testing for the software helps in checking the software’s accessibility, scalability, and responsiveness.

Product

XLR-Function Tester

CTG-1NOISE

-

Monacor International GmbH & Co.

CTG-1NOISE - Monacor International GmbH & Co.

With integrated pink noise generator. For quick and easy functional testing of balanced microphone cables or microphone inputs on stage.

Product

Tooling And Fixturing

-

EIIT, S.A.

EIIT, S.A.

Control develops and supplies fixtures and test accessories :*For a vast field of applications - ICT (In-Circuit Test), functional test, Flash programming, EoL (End-of-Line) test systems, etc.*For all handling systems currently used in the market: online or offline, mechanical, pneumatic or vacuum operation*From simple mechanical fixtures, with a few hundred probes and low production volumes, to highly complex accessories with thousands of probes, double-sided probes, double acting, etc.

Product

Full Wafer Test System

FOX-1P

-

Aehr Test Systems

FOX-1P - Aehr Test Systems

Enables High Throughput, Single Touchdown, Full Wafer Production Testing. Capable of simultaneously testing up to 16,000 die in a single wafer touchdown. Resource configurable up to 16,384 " Universal Channels " - each programmable as anI/O, Clock, Pin Parametric Measurement Unit ( PPMU ) or Device Power Supply ( DPS ). Software-enabled per site flexibility to support small and large device pin count test needs. Comprehensive functional and parametric test capabilities Deep functional pattern data and capture memory optimized for BIST/DFT testing. Per channel PMU for per site parametric testing Individual channel over-current protection to protect wafers and probe cards. Configured for high volume production. Compatible with industry standard probers and probe cards. Available as an integrated test cell with prober, probe cards and 16,384 channel probe I/F. Configurable as a single or dual system integrated test cell.

Product

Power-off Circuit Board Testing

Huntron® Trackers®

-

Huntron

Huntron® Trackers® - Huntron

Adding diagnostic tools to enhance your circuit board test capabilities is an important part of any electronic repair environment.Huntron Tracker power-off circuit board test uses analog signature analysis to detect and isolate component faults on boards beyond power-on functional testing. By comparing Tracker signatures from a working circuit board to the signatures of a non-working board, you can troubleshoot down to the component level.

Product

ICT/FCT-Fixtures, Max UUT 250 × 180 mm (wxd)

CK-1 Small (Hold-Down Gate) / 230154

-

Columbia Elektronik AB

CK-1 Small (Hold-Down Gate) / 230154 - Columbia Elektronik AB

The series of In-Circuit testers that are Teradyne for the 228x and TestStation are dedicated tools that rely on the tester hardware for diagnostics and test pattern delivery. The integration of the stand-alone BTS with the Teradyne ICT can enhance the system’s capability. In other words, it can provide access to additional tools. It provides the user with a common platform and portability of test patterns from stand-alone to ICT and later on to functional test and depot test stations.

Product

Microprocessor System Tester

IST-6700

-

IST Information Scan Technology, Inc.

IST-6700 - IST Information Scan Technology, Inc.

The IST 6700 is a low cost, stand-alone test instrument that provides a wide range of automatic and manual features for troubleshooting microprocessor-based circuit boards. It employs CPU emulation with low cost CPU personality pods to attach to or replace the resident CPU. With stored "Known Good" test data, the 6700 can provide fully automatic functional tests to check the system RAM, ROM, control signals, address, and data bus plus the measurement of the CPU clock frequency and supply voItage.

Product

AC/DC TRMS Insulation Clamp Meter

CMi210

-

Martindale Electric Co. Ltd

CMi210 - Martindale Electric Co. Ltd

A unique insulation clamp meter for the installation, testing and maintenance of domestic and industrial installations. This high specification clamp meter can perform insulation tests to 6G Ohms with 5 test voltages from 50V to 1000V.

The clamp provides True RMS measurement of AC current to 1500A and AC voltage to 750V. It will also measure DC current to 2000A and DC voltage to 1000V. The CMi210 has all the same test functions you would expect to find on a high specification multimeter with the added benefit of temperature measurement.

Product

High-Voltage Test and Diagnostics Device

Viola

-

BAUR

Viola - BAUR

Cable testing and diagnostics with the BAUR viola. The portable and powerful viola high-voltage testing and diagnostics device is used for cable and cable sheath testing of medium-voltage cables up to 35 kV and electrical equipment. Another function is insulation testing on electrical equipment.* High performance and compact* Precise and non-destructive determination of the cable condition* Easy and quick test setup* Automatic testing and diagnostic sequences

Product

Functional Test

-

WEETECH, INC.

WEETECH, INC.

For a functional test the WEETECH test systems simulate reality and enforce switching operations that can only be tested in an embedded condition. In doing so voltages, currents, time intervals and other measurement categories are adjusted and switching sequences are processed in a way, it would happen in reality.

Product

Environmental Digital Multimeter, 4000 Count, Average, Auto Range, 3.75 Digit

72-9165

-

Tenma

72-9165 - Tenma

Feature loaded DMM includes multiple environmental testing functions replacing 6 testers: light meter, sound level meter, hygrometer, thermometer, non-contact voltage detector, and multi-function multimeter.

Product

120-600V Solenoid Voltage And Continuity Tester

1865

-

Peaceful Thriving Enterprise Co Ltd

1865 - Peaceful Thriving Enterprise Co Ltd

This solenoid voltage tester has multiple functions. It tests for voltage, continuity and polarity.

Product

AC Hipot Test Set

-

Weshine Electric Manufacturing Co., Ltd

Weshine Electric Manufacturing Co., Ltd

AC Hipot Test Equipment for Dielectric Withstand Test are suitable for 50 / 60 Hz AC testing of low capacity test objects. Optionally, these units can also be upgraded to function as DC test sets by mounting the rectifier attachment on top of the transformer.Weshine® AC Hipot Test Set for AC hipot test can be equipped with a rectifier attachment for DC voltage testing.Typical application areas:Testing of cables Testing of switchgearTesting of transformersTesting of CP & PTTesting of MV systems

Product

BCI Tester

-

Peritec Corp.

Peritec Corp.

Test scenario creation function of BCI test.・Test scenario auto-run feature.・Test results file generated automatically.　(CSV file: can be customized)・CAN / LIN communication function, data logging.　(FlexRey available)・Power I/O, ECU I/O control functions, data logging.・Anomaly detection function display.・Noise detection function.