Pressure Testers
-
Product
Low Pressure Cylinder Leak Tester
CLT4PB
-
Tests leakage at 35psi compared to 100psi in current leakage tester. Lower pressure prevents smaller bore cylinders from moving as they might under 100psi. Works well on small engines found in recreational, marine and other applications.
-
Product
Medical Mask Gas Exchange Pressure Difference Tester
DRK371
-
Shandong Drick Instruments Co., Ltd.
It is used to measure the gas exchange pressure difference of medical surgical masks and other products.
-
Product
Pressure Sensors
-
Whatever configuration you require, look to Sensata. Our devices span a spectrum of pressure ranges, configurations and form factors.High pressure (>750psi / 50bar)Micro Silicon Strain Gauge solutions provides rugged reliability and a hermetic seal for a wide variety of environmentsMid pressure (100 to 750psi / 6 to 50 bar)Ceramic capacitive or MEMS solutions offer a wide range of solutions tailored to application needs at superior valueLow pressure (inches of water to 100psi / 2mbar to 6 bar)MEMS solutions including TPMS offer extremely low power consumption and wireless connectivity
-
Product
Pressure Mapping
TIRESCAN
-
Complete pressure imaging system for conducting tire tread analysis.
-
Product
Pressure Measurement
-
When operating below the Pirani gauge range (10-3 mbar), an ion gauge can be used to measure pressure. There are a range of gauge heads and filament materials to cover specific pressure ranges and vacuum requirements in this region. The VACGEN ion gauge heads operate using the same principle but vary in design and construction to most accurately monitor pressures within specific ranges.
-
Product
Pressure Modules
SET
-
Using our cRIO pressure module you can easily and safely gather 6 pressure measuring channels separately.
-
Product
Pressure Meter
ZET 7112-A VER.2
-
The ZET 7112-A VER.2 pressure meter is intended for use in automated process control systems for various industrial applications:
-
Product
Pressure Transmitters
-
Explosion-proof pressure transmitter is approved for use in hazardous locations per CSA Standard 30 and UL Standard 1203 for Class 1, Division 1 and Division 2 hazardous locations. Wetted parts are all 316L Stainless Steel (50 up to 10000 PSIG), 17-4PH (15000 & 20000 PSIG) for compatibility with a variety of media. Wetted materials and construction comply with the NACE MR0175 Standard. The KP46 Series explosion-proof pressure transmitter's fitting and sensing diaphragm are machined out of a single piece of material, so there are no welds, seams or O-ring seals, resulting in excellent long-term performance and stability. The case is factory sealed, making this pressure transmitter very rugged with excellent shock and vibration resistance.
-
Product
Pressure measurement
-
Powerful instruments for process pressure, differential pressure, level and flow. Whether pressure, level or flow, today pressure measurement technology is often used for measuring liquids, pastes and gases. With a wide range of sensor technology Endress+Hauser offer instruments with perfect fit for any kind of application.
-
Product
Pressure Sensors
-
Our wide product range includes high-quality solutions made of stainless steel (MEX5/MEX3) for the most demanding environments, such as those found in the petrochemical industry or with applications involving sea-water. In addition we develop special solutions for military and civil aviation and shipping. Many EPC contractors have recognized our value as a skilled partner for measuring instruments for the construction of entire plants such as refineries, power stations or water treatment plants.
-
Product
Pressure
-
ACI’s wet- and dry-media pressure sensors ensure your building operates at the highest level of efficiency. Multiple models have user-configurable options to maximize application flexibility.
-
-
Product
Differential Pressure
-
In differential pressure measurement, different pressures act on an oil-filled, pressure difference measuring cell from two sides. The instrument converts the pressure differential into an electronic signal.
-
Product
Pressure Switches
-
A type of switch activated by the pressure of the process fluid upon reaching a certain threshold or set point.
-
Product
Pressure Sensors
PF
-
Panasonic Industrial Devices Sales Company of America
High precision pressure sensor (without amp.)
-
Product
Pressure / Manometers
-
Sper Scientific handheld manometers, vacuum, and pressure meters are ideal for measuring low differential pressure in clean rooms, test and balance, medical equipment, HVAC, pneumatic systems and computer peripherals.
-
Product
Vacuum Pressure Transducers
-
MKS modular vacuum transducers feature compact size that dramatically reduces installation costs. These vacuum/pressure gauges are ideal for applications where controller size and local control are critically important. They are available as pressure transducers with an analog output, or as vacuum modules with digital communications used to transmit the pressure signal.
-
Product
Pressure Measurement Film
Prescale
-
Prescale allows you to easily measure pressure balance, distribution, and size. Created using Fujifilm's advanced thin film coating technologies, the pressure inspection sensor on the entirety of the film allows you to confirm pressure distribution of the entire surface at a glance. The color appears red where pressure is applied, and the color density varies according to the amount of pressure. To cover a wide pressure range (0.006 to 300 MPa), we supply eight types and nine variations of Prescale.
-
Product
Pressure Gauges
-
Diaphragm pressure gauges feature stainless steel construction for superior chemical and corrosion resistance for your intermediate pressure measurement applications. Because of the protective diaphragm seal design, these pressure gauges are ideal for use with viscous as well as corrosive fluids. Optionally, these diaphragm pressure gauges may be ordered with glycerine filling to help dampen the effects of machine vibration and pulsation of the media.
-
Product
Pressure Transducers
-
Procter & Chester Measurements Ltd
A transducer is a generic name that is a device which is usually electronic that coverts a physical attribute to a measurement signal.
-
Product
Pressurized Foam Rheometer
-
Chandler Engineering developed an advanced tool for well completions designed specifically to measure the rheological properties of foamed systems under extended pressure and temperature conditions.
-
Product
Pressure Measurement - Vacuum
-
Vacuum port digital manifold comes with a remote vacuum probe for faster and more reliable evacuations, Bluetooth App, two clamp temperature probes for instantaneous superheat / sub-cooling readings, and convenient service case.
-
Product
Differential Pressure Transmitter
DPA Series
-
Adtek has multiple transmitters which can be applied on different types of work environment. To have a better quality of life, buildings with central centilation system (CVS) become a trend, so we recently developed a new product, DPA, indoor differential pressure transmitter. The users can set up the measured range according to the actual use, and make zero adjustment for the differential pressure. Besides being equipped with regular analog outputs, we also added RS-485 output to DPA which is a simple and low cost communication tool connecting with monitoring system.
-
Product
Gauge Pressure Transmitters
-
The Gauge pressure transmitter portfolio from ABB offers a broad variety of communication possibilities. Another highlight of our sensors is the measurement accuracy up to 0.025 %.
-
Product
Pressure Module
APM CPF
-
AMETEK Sensors, Test & Calibration
The APM CPF Series portable pressure modules offer the functionality and flexibility to perform pressure calibrations with a multifunction process calibrator. Or, combine with a hand-held pressure calibrator to expand its range. The APM CPF delivers the same high level accuracy whether in the lab or in the field.
-
Product
Digital Pressure Gauges
-
Digital gauges with alarms, DC loop-powered gauges, differential pressure gauges, and a variety of features. They provide fast results with clear readability and very high accuracy.
-
Product
Pressure Controller/Calibrator
6270A
-
The 6270A is a robust, reliable solution that lets you dramatically simplify the task of pneumatic pressure calibration. Thanks to its modular design, it is so flexible that it can be configured to meet a wide variety of needs and budgets, and expanded to cover a very broad workload, at purchase or later as your needs change and grow.
-
Product
Industrial Pressure Calibrator
2271A
-
The Fluke Calibration 2271A Industrial Pressure Calibrator provides a complete, automated solution for calibrating a wide variety of pressure gauges and sensors. Thanks to its modular design, it can be configured to meet different needs and budgets, and expanded to cover a broad workload. The 2271A is ideal for calibration laboratories starting out in pressure calibration because it offers wide pressure measurement capabilities in a single instrument. Everything you need for calibrating pressure is included; just connect supply pressure. And your investment will stand the test of time: as your workload grows and changes, the 2271A can grow and change too. Just add measurement modules.
-
Product
Process Pressure Gauges
-
Process pressure gauge is used throughout process and industrial markets, and is known for it's reliability, safety and performance. Standard features have been engineered to satisfy harsh requirements, while the wide selection of pressure ranges and options make this product an exceptional value.
-
Product
Sanitary Pressure Transmitter
681
-
The Series 681 Sanitary Pressure Transmitter is designed to meet 3A standards for applications in food, dairy, beverage and pharmaceutical processing, liquid level control, and sanitary pipelines. The unit is fully sealed to withstand high pressure washdown in Clean-in-Place (CIP) and Sterilize-in-Place (SIP) installations.
