Product

Lacquered Digital I/O Board, 64 Optically Isolated I/O Channels, 24V

APCI-1564-LAC

-

TEAM SOLUTIONS, INC.

APCI-1564-LAC - TEAM SOLUTIONS, INC.

*32 digital input channels, 24V, incl. 16 interruptible*32 digital output channels, 24V, 500 mA / channel*Optical isolation 1000V*Input and output filters*Watchdog, timer*After power/ON the outputs are reset to ì0î

Product

Optical Fiber Test Platform

Fiber Lab 3200

-

M2 Optics, Inc.

Fiber Lab 3200 - M2 Optics, Inc.

Fiber Lab 3200 from M2 Optics Inc. is a must-have solution for anyone developing or testing fiber optic products and systems. Available in two types of rack-mount chassis with up to 300km per unit, it offers the most professional approach for using fiber in the laboratory or network.  In addition, it provides maximum protection against potential fiber and connector damage.

Product

Optical Power Meter with Optical Head

GM8012 + 2 X GM8300X

-

UC Instruments, Corp.

GM8012 + 2 X GM8300X - UC Instruments, Corp.

The UC8820 + 2 X UC8820X optical power meter with optical head offer superior performance for the test of DWDM components, AWG & PLC components, optical amplifiers, and other general purpose of fiber optical test and measurement applications. It is special design for volume production line application.

Product

Optical Limiting Amplifiers

-

Analog Devices Inc.

Analog Devices Inc.

Analog Devices high gain optical limiting amplifiers feature low power, low jitter, and excellent sensitivity performance. Our limiting amplifiers include receiver functions such as quantization, loss of signal detection, and SFF-8472-compliant average power measurement. Along with SFP, SFF, and GBIC MSA module designs, our amplifiers also support physical layer protocols that include 1 ×, 2 ×, and 4 × Fibre Channel, 10GBASE-LX4, multiple rate SONET/SDH up to OC-48 with FEC, and Gigabit Ethernet.

Product

HFC 4 Ways Return Path Optical Receiver

HR2040A, HR2040B

-

Hangzhou Huatai Optic Tech. Co., Ltd.

HR2040A, HR2040B - Hangzhou Huatai Optic Tech. Co., Ltd.

HR2040 series HFC four ways return path receiver can convert upstream optical signal to RF signal at the head-end and remote control center. Four independent receivers integrated into a 1RU 19” casing to supply service for HFC network terminal. Receiver's low noise design, -22dBm receive sensitivity can provide service to farther place. There are two versions of this receiver. HR2040A with LCD on the front panel, HR2040B without LCD. All receivers are temperature tolerance type can be installed in any network surroundings including out-door type. Both of these two types can adopt SNMP function which can control the front panel to realize optimization work at the head-end and remote installment.

Product

Digital Video/Audio/Data Optical Transceiver

OD3000A

-

Hangzhou Huatai Optic Tech. Co., Ltd.

OD3000A - Hangzhou Huatai Optic Tech. Co., Ltd.

Huatai OD3000A digital series optical transceiver, adopts digital video coding technique and WDM technique to satisfied user's multipath digital video, audio, data, ethernet's long distant high quality optical fiber transmission because of its full-found. Product including single fiber one way digital video, single fiber 64 routes video, 128 routes audio and data uni-direction and bi-direction complication. OD3000A can transmit the camera audio/video signal, camera and tripod head control data as well as other control function to central control room from remote end by optical fiber. It can be widely used in the remote monitoring, video conference, video medical ， remote education and other systems of public road, traffic, industrial and mining, community ect.

Product

FTTH Optical Node

SR202AF

-

Hangzhou Softel Optic Co., Ltd.

SR202AF - Hangzhou Softel Optic Co., Ltd.

SR202AF  Optical Receiver has high performance, lower receiver optical power and lower cost for CATV operators providing high quality and excellent FTTH network solution. Product schematic diagram as below:

Product

Fiber Optic Test Solution

Eye-BERT Micro 10G

-

Spectronix

Eye-BERT Micro 10G - Spectronix

The Eye-BERT Micro 10G is a low cost, easy to use, all-in-one XFP based fiber optic test solution offering high performance bit error rate testing at a fraction of the cost while providing a rich set of features not found in other bit error rate testers. Features include: variable bit rate, user programmable patterns, diagnostic monitoring, and wavelength tuning (per XFP capability). Additionally, with a click of a button, the Eye-BERT Micro 10G will automatically test an XFP module based on the information it reads from the transceiver and generate a detailed test report complete with manufacturer, part number, serial number, date code, fiber type, link length, speed, and test results. The Unit is supplied with anti-skid bumpers and is small enough to be integrated into larger systems for dedicated link verification.

Product

12-bit, 200KHz, 16SE/8DIFF Isolated AI, 4 12-bit AO, 8 Optically Isolated Dig. I/O, 24V, 24 TTL I/O

APCI-3110-16

-

TEAM SOLUTIONS, INC.

APCI-3110-16 - TEAM SOLUTIONS, INC.

The APCI-3110 is a 12-bit multifunction board for 3.3 V and 5 V PCI systems, with optical isolation up to 1000 V and a high throughput rate of 200 kHz. The PCI board has additional types of conversion: Sequence RAM, Auto Refresh, scan, timer or external event.Furthermore, the board has a PCI DMA, 2 watchdogs, 4 digital inputs and 4 digital outputs. Sensors, which allow to supply current signals instead of voltage signals, also can be acquired with the APCI-3110, as this board offers up to 16 current inputs. The board is protected against overvoltage and input filter and it is protected against high frequency emmission. With the free calibration tool you can do the fine adjustment on-site.

Product

Optical Transmitter

ST1310-XX

-

Hangzhou Softel Optic Co., Ltd.

ST1310-XX - Hangzhou Softel Optic Co., Ltd.

ST1310-XX Optical Transmitter adopts high linearity ORTOL DFB laser, build-in perfect pre-distortion adjustment circuit and laser APC,ATC closed loop control circuit. All the operating parameters are controlled by micro-processor, The LCD screen on the front panel can display relative operating status and the fault information.

Product

Optical Fiber Identifier

FID-30R/ 31R

-

Shanghai Fibretool Technology Co.,Ltd.

FID-30R/ 31R - Shanghai Fibretool Technology Co.,Ltd.

FID-30R and FID-31R are optical fiber identifier for telecommunication cable. FID-30R is built-in optical power meter.

Product

Fiber Optic Measurement Systems & Sensors

-

MTI Instruments

MTI Instruments

MTI Instruments offers large measurement range and standoff distance fiber-optic measurement sensors and probes that provide ultra sensitive linear output response. Our modular (interchangeable) non-contact fiber optic sensors systems have dual channel that enables the user to make simultaneous measurements. Our fiber optic probes are designed to automatically compensate large changes in reflectivity making it possible to monitor dynamic reflectance of up to 100:1 making it ideal for measuring vibration of ultrasonic horns, modal analysis of disk drive suspension, displacement and timing of fuel injectors and lateral motion measurements.

Product

Optical Monitoring

-

Coherent Corp.

Coherent Corp.

Perform OSNR monitoring, valid channel detection, and center wavelength measurement of signals with arbitrary modulation formats.

Product

Optical Square

10777A

-

Keysight Technologies

10777A - Keysight Technologies

The Keysight 10777A Optical Square, used with Keysight straightness measurement optics, adds squareness measurement capability to the Keysight5530 Laser Calibration System. The optical square measures the squareness of axes during laser calibration of a machine tool. The Keysight 10777A uses two accurately-aligned mirrors to direct an output beam at precisely 90 degrees to an input beam.

Product

Digital I/O Board, 64 Optically Isolated Digital I/O Channels,, 5V

APCI-1564-5V

-

TEAM SOLUTIONS, INC.

APCI-1564-5V - TEAM SOLUTIONS, INC.

*32 digital input channels, 5V, incl. 16 interruptible*32 digital output channels, 5V, 500 mA / channel*Optical isolation 1000V*Input and output filters*Watchdog, timer*After power/ON the outputs are reset to ì0î

Product

Fiber Optic Network Simulators

SIM-2FON-25

-

Virtual Console, LLC

SIM-2FON-25 - Virtual Console, LLC

Vconsole fiber optic network simulator is custom built portable unit intended to simulate installed fiber optic facilities. Vconsole will design and build custom unit exactly to customers specification. The enclosure is capable of housing an individual spool with up to 100km of fiber. We will build each unit to client unique needs with custom fiber types, lengths, and connectors. A full range of connectors are available including SC, ST, FC, and LC types. This product is ideal for latency testing, product development and training and educational needs.

Product

Optical Time Domain Reflectometer / OTDR Tester

M-OTDR-802

-

Fuzhou Metricu Technology Co Ltd

M-OTDR-802 - Fuzhou Metricu Technology Co Ltd

Wavelength 1310 / 1550nm, max test range 150KM, Dynamic range 28 / 26dB

Product

Saluki S5700 Series Field Comm Analyzer (SA/CA/OPTICAL)

-

Saluki Technology Inc.

Saluki Technology Inc.

S5700 Series Field Comm Analyzer combines the highest performance operating specifications and multi-functional measurements such as cable and antenna system analysis, fiber inspection, spectrum analysis, cellular signal demodulation, interference analysis, signal coverage mapping and RF/optical power measurements in a single instrument.

Product

Optical Connector Inspector

OCI-20BN

-

ShinewayTech

OCI-20BN - ShinewayTech

OCI-20BN is a portable optical fiber connector inspector for checking fiber and connector end-face cleanliness, ideal for bench top and fiber optic network installation technicians to eliminate error caused by poor quality or improper cleaning.