Showing results: 2086 - 2100 of 2671 items found.
-
GX3903 Series -
Marvin Test Solutions, Inc.
The GX3903 is a 3-port, cPCI asynchronous communications interface board supporting RS-232, RS-422, and RS-485 interfaces. Each port is configured at the time of order for RS-232, RS-422 or RS-485 signaling. The default configuration is RS-232. For RS-232 mode, each port supports RTS, CTS, TXD, RXD, DCD, DRC, DSR, and RI signaling. The RS-422 mode supports TXD, RXD, CTS, and RTS with each line operating differentially with a uni-directional drive.
-
Model 7070-324 -
Pentek, Inc.
The FlexorTM Model 3324 is a multichannel, high-speed data converter FMC. Itis suitable for connection to HF or IF ports of a communications or radar system. It includes four 500 MHz, 16-bit A/Ds, four 2 GHz, 16-bit D/As, programmable clocking, and multi-board synchronization for support of larger high-channel count systems. When combined with a Pentek 3U VPX or a PCIe FMC carrier, the 3324 is available as a FlexorSet, a complete turnkey data acquisition solution.
-
100BASE-T1 -
Prodigy Technovations Pvt. Ltd.
100BASE-T1 Automotive Ethernet Protocol Analyzer is the Protocol Analyzer with multiple features to capture and debug communication between host and design under test. Automotive Ethernet interface scales up to address current and future needs of in-vehicle bus speed requirement. Need for higher-speed in-vehicle bus is increasing to support feature-rich ADAS and connected vehicle needs. Two-wire full duplex 100BASE-T1 PAM 3 signaling is the choice of interface bus to address these needs
-
AQW Series -
Chuan Sheng Electronics Co., Ltd.
AQW series was designed for air quality measure, such as PM2.5, Ch20, CO2, temperature and humidity. Use high-precision sensor to ensure long-term stability and reliability of the instrument.Panel with large LCD display, easy to read the measuring value.And also have 4 LED indicator to indicate air quality status and device running.AQW series communication port is WiFi, it’s convenient for data collect, support Modbus TCP protocol, and others cloud protocol.
-
Anritsu Corporation
Handheld Cable and Antenna Analyzers offer measurement capabilities including precision return loss/VSWR, cable loss and distance-to-fault (DTF) measurements. Handheld analyzers help field technicians perform field verification and fault location to detect problems before they become costly, time-consuming system failures. Site Master is the leading choice for installation, maintenance, and troubleshooting of microwave cables and communication systems in cellular and broadcast industries as well as aerospace and defense.
-
HOPM-3208 -
Hangzhou Huatai Optic Tech. Co., Ltd.
With six wavelength calibrating spots (980nm, 1310nm, 1490nm, 1550nm, 1590nm and 1610nm), refined design, easy operation, linearity or non-linearity display, unique FC/SC/ST all-purpose connector, HOPM-3208/HOPM-2650A is the earliest self-developed hand-held optical power meter of Huatai, which can be used for direct optical power measurement as well as relative measurement of optical link loss. It’s an essential test instrument in Optical Communication, CATV system construction and maintenance.
-
pimd -
Ace Wavetech
The IMD (Inter Modulation Distortion) created in the passive components such as Antenna, Filters, Couplers, Dividers,Connectors and Cables become a harassing matter in the mobile communication network operators and maintenance engineers. Using AWT's various PIMD analyzer models, the manufacturers, designers and operators can reduce their time and cost to isolate those components before install the network systems. AWT has introduced the smallest and the most competitive PIM Analyzers with the lowest price in the globe.
-
Alfamation S.p.A
Nowadays vehicles have lot of onboards computing and communication devices packed with integrated safety, functional, information and entertainment systems. Vehicle buyers now demand features like cameras, infotainment and radar, which subsequently pushes automakers to invest in higher-capacity in-vehicle networks based on Bluetooth, WiFi, USB, radar, video, smart sensors and cameras. Today, they are generally considered to be standards features. All this devices require accurate and certified testing.
-
NI
Multifunction Reconfigurable I/O Devices feature a dedicated A/D converter (ADC) per channel for independent timing and triggering. This design offers specialized functionality such as multirate sampling and individual channel triggering, which are outside the capabilities of typical DAQ hardware. You can customize these devices with the LabVIEW FPGA Module to develop applications requiring precise timing and control such as hardware-in-the-loop (HIL) testing, custom protocol communication, sensor simulation, and high-speed control.
-
Saint2 -
DG Technologies
Testing Interfaces for Multiple Simultaneous Serial Busses Extensive On-board Memory Capacity High-performance Infineon Micro-controller RS-232 and USB Interfaces for Communication with a Host Computer SAINT2 Hosts Software for Your PC User-configurable DB-25 Cable Optional Discrete I/O Add-on Daughter Board System Applications Product Development, Testing and Software Re-flash in One Device Bus Monitor 2 Message Filtering, Scripting, Emulation and Logging Scrolling Message Monitor SAINT Bus Engine Provides Open API for Software Applications Interfaces with USB/RS232 Create Your Own Plug-ins
-
929A -
Arbiter Systems, Inc.
Model 929A Three Phase Power Meter is an economical alternative to both the Model 931A Power System Analyzer and the Model 930A Three Phase Power Analyzer when serial communication, dc voltage measurement, transducer calibration and timer features are not required. The Model 929A has the same ac accuracy as the Model 931A with PowerDSA™ Digital Signal Analysis, and is a complete diagnostic tool for use in the substation and industrial power environment.
-
Stalker DUAL SL -
Applied Concepts, Inc.
Industry Leading Performance • Automatic Same Direction Tracking • Intelligent Fastest Speed Tracking • Available with 1 or 2 Antennas • 3 Window Multicolored LED Display • Read-Thru Lock • Cordless Infrared Remote • Compensated True Audio Doppler • Digital Antenna Communications • Narrow Beam Width • Waterproof Ka Band Antenna • Small Detachable Display Unit • Software Upgradeable • Interfaces with Cameras & Computers • 3 Year Full Warranty
-
Ruetz System Solutions GmbH
In automotive data communication the development of automotive technologies requires precisely aligned processes and workflows. For this, RUETZ SYSTEM SOLUTIONS puts our proven special knowledge and our structured processes at the disposal of carmakers and suppliers. Through our experience as a test partner, project managers obtain the clear, unbiased perception of an independent test house. As such, it is possible to objectively assess the maturity of a development at each design stage, and consequently to reach a smooth and punctual production start.
-
RF ITS -
Sterner Automation Limited
Sterner's automated test management system, combined with integrated RF technology modules, provides full functionality, including: Apply power to the device under test (DUT). Read and write blocks of data to set up and validate product EEPROM using a hard-wired communications interface. Scan transmitting devices or traveller barcodes and write the information to the DUT (the "sign-up process"). Inject an RF signal of known frequency and power level to test receiver sensitivity.
-
LXinstruments GmbH
General functional test system based on LXI instrumentation for high mix / low to medium volume manufacturing. DUTs are tested which are mainly used as communication and measurement modules in power plant technology, grid management and electrical drives.The system has a Virginia Panel adapter interface to which various desk adapters can be docked, including automated contacting of the DUTs. A camera for the verification of light emitting diodes on the test object is integrated in the adapter interface.
