Custom Fixtures
-
Product
Custom Systems
-
Due to many years of experience in the development and manufacturing of signal transmission equipment in different frequency ranges and with various functions, we are able to design special systems that are completely tailored to your needs.
-
-
Product
Board Test Fixture Probes
-
Offering a wide range of standard spring contact probes to meet your testing requirements and has long been recognized as the world’s largest probe manufacturer. With over 60 different probe series ranging from 0.02" (0.51 mm) to 0.187" (4.75 mm) pitch with multiple length, travel, ICT, lead free and rotator options, we provide a full portfolio designed for general purpose test on bare boards, loaded printed circuit boards and surface mount assemblies.
-
Product
Test Fixture Adapters for In-Circuit Test Fixtures
-
Circuit Check test fixture adapters are utilized when the target ICT tester is not available or has been replaced with a newer technology tester. The tester adapter will often allow existing test fixtures from one test manufacturer to be utilized on another manufacturer test platform, eliminating the need for replacement fixtures. Contact Circuit Check to discuss your tester and fixture combinations for the best choice of a cost effective solution.
-
Product
Fixture Building Software
FixGenius
-
Tests show that FixGenius’ rule-based probe-mapping algorithms reduce pin deflection by up to 25% compared with traditional fixturing packages. FixGenius comes with a powerful Fixture Editor that allows the user to change the probe mapping. If a solution is mathematically possible, FixGenius’ algorithms will find it, and pick the one with least deflection. If the job simply cannot be done with one single fixture, FixGenius will fully automatically split the test into multiple fixtures or into fixture and flying probe test sets, with guaranteed test integrity.
-
-
-
Product
ICT/FCT-Fixtures Max UUT 370 × 300 mm (wxd)
CK-2 Large (Hold-Down Gate) / 230158
-
The series of In-Circuit testers that are Teradyne for the 228x and TestStation are dedicated tools that rely on the tester hardware for diagnostics and test pattern delivery. The integration of the stand-alone BTS with the Teradyne ICT can enhance the system’s capability. In other words, it can provide access to additional tools. It provides the user with a common platform and portability of test patterns from stand-alone to ICT and later on to functional test and depot test stations.
-
Product
Custom Test Stands/Production Test Cells
-
Emprise Corporation is an engineering consulting firm serving the automotive, aerospace, industrial and alternate power industries. Our expertise in each of the individual fields of technology, systems integration, construction management, and integrated test facility design and delivery sets Emprise apart from other single-source engineering firms.
-
Product
Custom Solutions for Mask Aligners
-
OAI offers custom designed solutions built to your unique specification.
-
Product
Custom & OEM Light Measurement Systems
-
International Light Technologies
ILT has been designing and developing light measurement systems since 1965. We are a trusted partner to our OEMs in all facets of industry, and deliver solutions to companies in UV curing, disinfection, phototherapy, laser-UV-blue-IR safety, 3D printing, pulsed light measurement, and much, much more.
-
Product
Custom Solutions
-
In addition to its product portfolio, Muquans is always interested in any technological development that would require its scientific and technological expertise. We can provide a wide range of tailored solutions, from a custom laser system or microwave synthesizer, to the development of a completely integrated solution.
-
Product
Customized Solutions
-
The design of customer-oriented of systems for scientific experiments in the field of attosecond physics, is a dedicated area of expertise of UltraFast Innovations. We offer thorough consultation in the design phase and reliable and expedient construction according to customer requirements.
-
Product
Custom & ASSP
-
Offering innovative SoC, SiP, ASIC, audio/video ASSP and other custom solutions and foundry services across a wide variety of applications in the automotive, industrial, medical, and aerospace & defense markets.
-
-
Product
Datapaq Customized Systems
-
Designed to provide the benefits of temperature profiling in unique heat treatment processes, these systems enable users to get reliable and accurate temperature profiles and from inside of the oven.
-
-
Product
3.4 MP Custom Lens Low Light Camera Module
e-CAM30_CUMI0330_MOD
-
e-CAM30_CUMI0330_MOD is a high performance, small form factor, 3.4 MP pluggable Low Light Camera Module with S-Mount lens holder. It is based on AR0330 - a 3.4MP CMOS Image sensor from ON Semiconductor®. It has a dedicated, high-performance Image Signal Processor chip (ISP) on-board that performs the entire Auto functions (Auto White Balance, Auto Exposure control) in addition to complete image signal processing pipeline that provides best-in-class images, videos and the optional MJPEG compressions.
-
Product
CAN & LIN bus Custom Test & Simulation Software
CanX
-
Schleissheimer Soft- und Hardwareentwicklung GmbH
CanX is the custom testing and simulation software for CAN and LIN bus for specific user groups. The run-time software is designed to execute predefined or automated tasks in testing, work preparation, production, repair or project management.
-
Product
Custom Design & Manufacturing
-
Engineering and manufacturing solutions serving aerospace and defense, including interiors, composites, and complex assemblies.
-
Product
Custom Vibration Testing Fixtures
-
Paragon Systems is unique in being able to not only perform your vibration test, but also to design, fabricate and qualify your vibration testing fixtures. Usually all we need from a client is their vibration test profile, a CAD model and the GD&T of the DUT.
-
Product
Exchangeable Test Fixture
MA 2109/D/H/S-5
-
Parallel contact stroke: 15 mmContact force max.: 2000 NInterface block required: Test system sideInterface signals max.: 850Component on PCB: 58 mmPressure frame unit-opening angle: 75Installation height test probe top: 16,0 mmInstallation height test probe bottom: 10,5 mmInstallation height dual-stage test probe bottom: 16,0 mmweight: 8,50 kg
-
Product
Customized COMINT Solutions
-
We have specialized in building solutions which require RF & synchronization and high data rate expertise. Our customized products and solutions are based on industry leading platforms and in-house developed building blocks. To fulfill the industries’ continuously increasing requirements we utilize FPGAs for heavy computational and timing tasks such as real-time signal processing, multi-channel synchronization or gap-less recording over a long period of time.
-
Product
Customer Specific Tests
-
No matter whether you have developed a product without an underlying standard or extended a product beyond the standard – we verify your product to see if it conforms to the characteristics specified by you.
-
Product
Custom IoT Application Development Services
-
Our innovative approach has been successfully delivered top-quality enrich IoT solutions for connected devices to our clients. Our expertise IoT team always follows best practices of the IoT ecosystem for delivering high-speed IoT applications with seamless connectivity with multiple 3rd party systems. #text-1076059564 { font-size: 1.35rem; text-align: left;}
-
Product
MECHANICAL TEST FIXTURE KITS
TX-MT-100 SERES
-
Test-X MT-100 Series mechanical kits are an inexpensive solution for testing smaller printed circuit boards and other devices.The MT-100 Series features a 1/2" thick FR4 probe plate and a 3/8" thick Lexan top plate. Precision alignment is assured through tooling holes in both the probe and top plates. Units are available with a 2-1/2" pan or an upper head assembly
-
Product
Customized Ellipsometers
-
~0.1 nm thickness difference can be seen by IE-1000.Thickness distribution of thin film can be imaged.Thickness and optical images of semiconductor device, display, and bio samples.IE-1000 can show the images which can not be seen by conventional microscope.Defect of semiconductor and display can be seen directly.Easy and fast operation.
-
Product
Custom Solutions
-
We work with you to accommodate your mission requirements. Our open architecture approach allows for so many possibilities, no idea is out of the question.
-
Product
Custom, 9-Slot, Front to Rear Cooling, AC Supercomputer Application
Barracuda 324 CS7510
-
Supercomputer application.
-
Product
Stand-Alone Test Fixture
MA 2011/D/H
-
Parallel contact stroke: 15 mmContact force max.: 2000 NInterface block required: NoInterface signals max.: 1000Component on PCB: 58 mmPressure frame unit-opening angle: 75Installation height test probe top: 16,0 mmInstallation height test probe bottom: 10,5 mmInstallation height dual-stage test probe bottom: 16,0 mmweight: 12,00 kg
