Acceleration
rate of change in velocity.
-
Product
Actuator
AP-GB/2.10
-
Actuator for precise operation of accelerator and brake pedal in vehicles.
-
Product
SMT Surface Mount MEMS High-G Shock Accelerometers
-
Piezoresistive MEMS high-amplitude shock accelerometers represent state-of-the-art industry technology for miniature, high amplitude, DC response acceleration sensors. This series is capable of measuring long duration transient motion as well as responding to and surviving extremely fast rise times, typical of a high-g shock event as found in explosive, gun and impact testing. Both packaged and OEM configurations are offered, to fulfill a variety of installation requirements.
-
Product
1U 19” Edge Computing Platform with Intel® Xeon® D Processor
MECS-6120
Edge Computing Platform
- 1x Intel® Xeon® D-17XX Series family processor- 3x DDR4-2666 RDIMM ECC REG up to 192GB- 2x 2.5” SATA bays and 2x M.2 M Key interfaces- 420mm depth 1U 19” rackmount form factor- Built-in Intel® QAT: SSL (20G), Compression (15G)- Intel® eASIC by card for FEC acceleration- EMC grade: Class B & Advanced chassis management, IPMI v2.0 compliant
-
Product
PCIe Gateway & Acquisition Accelerator Card
VEGA-3321
-
4-ch UHD ST2110 over 2x 25G SFP or 4x12G-SDIBroadcasting grade video acquistion up to 4:2:2 10bitNMOS IP video management w/ IS-04 & IS-051-ch 4Kp60 or 4-ch 1080p60 real-time HEVC/AVC encodeSupport FFmpeg and property advantech SDK
-
Product
Azure Machine Learning
-
Empower data scientists and developers with a wide range of productive experiences to build, train, and deploy machine learning models and foster team collaboration. Accelerate time to market with industry-leading MLOps—DevOps for machine learning. Innovate on a secure, trusted platform, designed for responsible machine learning.
-
Product
CPU Boards
-
Advantech CPCI series provides high-performance 6U CPU blades based on Intel processors for data computing, and acceleration offload for storage.
-
Product
Type 39 CompacFrame Development Platform, 1 - 4 Slot 3U VPX Power And Ground Backplane
39P01BWX6ZY2VCC0-Tx
-
Elma’s slimline CompacFrame is the next-generation platform designed to accelerate development and test of Plug-In Cards (PICs). The 3U card cage in the platform is tilted upward by 5º for easier card access and accommodates backplanes up to 4 slots.
-
Product
Data Analytics
-
KLA’s data analytics systems centralize and analyze the data produced by inspection, metrology and process systems. Using advanced data analysis, modeling and visualization capabilities, our comprehensive suite of data analytics products support applications such as run-time process control, defect excursion identification, wafer and reticle dispositioning, scanner and process corrections, and defect classification. By providing chip and wafer manufacturers with relevant root cause information, our data management and analysis systems accelerate yield learning rates and reduce production risk.
-
Product
4.5 Digit Handheld Multimeters
U1250 Series
-
The process of isolating faults is unpredictable. Equip yourself with a versatile 4.5-digit multimeter (DMM) that simplifies analysis, accelerates glitch detection, and makes it easier to probe hard-to-reach points. The Keysight U1250 handheld digital multimeters (U1251B, U1252B, and U1253B) deliver powerful performance and features that meet your toughest requirements and applications.
-
-
Product
Actuator
MC-G/S.10
-
Actuator for precise operation of accelerator handle of motor cycles and 3-wheeler.
-
Product
Analog Bus Extension for PXI
ABex
-
The ABex (Analog Bus Extension for PXI) is an exceptional test platform that extends to accelerate productivity, development throughput and time to market. Applicable in various industries and technological fields, this platform covers complex test challenges anywhere on the production line.Due to its flexible system architecture with an analog bus backplane and terminal modules, the platform allows the integration of technology specific extensions and extremely short system set up times which result in a reduction of total system costs.
-
Product
Accelerometers - Special Purpose
-
Analog Devices accelerometers and iSensor® MEMS accelerometer subsystems provide accurate detection while measuring acceleration, tilt, shock, and vibration in performance driven application. Our portfolio leads the industry in power, noise, bandwidth, and temperature specifications, and offers a range of MEMS sensor and signal conditioning integration on chip. Our MEMS-based Circuits from the Lab® reference designs have been built and tested by ADI experts to help you jumpstart your next system design.
-
Product
Packaging Manufacturing
-
KLA’s extensive portfolio of packaging solutions accelerates the manufacturing process for outsourced semiconductor assembly and test (OSAT) providers, device manufacturers and foundries for a wide range of packaging applications. Innovations in advanced packaging, such as 2.5D/3D IC integration using through silicon vias (TSVs), wafer-level chip scale packaging (WLCSP), fan-out wafer-level packaging (FOWLP) and heterogeneous integration as well as a wide range of IC substrates create new and evolving process requirements. KLA offers systems for packaging inspection, metrology, die sorting and data analytics focused on meeting quality standards and increasing yield before and after singulation. SPTS provides a broad range of etch and deposition process solutions for advanced packaging applications. Orbotech offers a portfolio of technologies that includes automated optical inspection (AOI), automated optical shaping (AOS), direct imaging (DI), UV laser drilling, inkjet/additive printing and software solutions to ensure manufacture of the highest quality of IC substrates.
-
Product
Scienlab Battery Test System – Pack Level, 110 KW Compact Version
SL1710A
Test System
Keysight’s SL1700A Scienlab Battery Test System – Pack Level Series allows to realistically emulate the environment of the future battery pack application in order to test the high-power battery pack comprehensively and improve its functions and safety. The growing demand of e-mobility increases the need of vast battery test labs for EV battery development. Keysight developed the SL1700A Series to accelerate the development and validation of batteries. It offers a voltage range of up to 1500 V and power options between 100 and 300 kW including a Performance Bundle to increase the power up to 330 kW. The new high-voltage SiC (silicon carbide) technology provides a high energy efficiency on a small footprint and helps to minimize your operating costs.
-
Product
Outdoor Accelerated Weathering Testing
-
Atlas Material Testing Solutions
Atlas has pioneered outdoor accelerated testing since their development of the Trac Rac in the 1950s. Atlas, primarily at its site in Phoenix, offers the variety of outdoor accelerated services that are listed below.
-
Product
Mezzanine System
3560
System
ECM P/N 3560 provides four independent I2C channels. For ease of development a PCA9564 interface IC converts parallel data to I2C serial communication. Additionally an LTC1694 I2C accelerator IC decreases the rise time of the passively pulled up I2C bus allowing for greater capacitive loading or higher bus speeds. Each channel is comprised of SCL, SDA and two Grounds.
-
Product
SMARC
ROM-5420 B1
-
ROM-5420 SMARC v1.1 Module integrates ARM Cortex-A9 NXP i.MX6 series ultra low power SoC and I/O solution chips to be OS support ready. NXP i.MX6 supports 2D, 3D graphics acceleration, full HD 1080P video decoding and an HD 1080p video encoding hardware engine.
-
Product
PXI Fault Insertion (Fault Injection) Modules
-
PXI Fault Insertion Units (FIU), also known as Fault Injection switch products, are designed specifically for safety-critical applications where the response of a control system is required to be evaluated when sensor connections behave in unexpected ways. These modules are scalable solutions that can be used to switch signals between simulations and real-life devices in a multitude of hardware-in-the-loop (HIL) simulation and test systems. The fault insertion unit can significantly simplify and accelerate the testing, diagnosis and integration work in HIL applications.
-
Product
Laser Diode Life Test
-
Life-tests consist of the highly accelerated ageing, under controlled conditions, of a group of lasers taken as a representative sample. Optical degradation of the laser diodes is observed and recorded by precisely measuring changes in the laser's operating characteristics during the test. Life-tests are used for vendor qualification of the laser diodes during product development and can be conducted throughout the production life of the laser.
-
Product
RMS Averaging Vibration Sensor
SQ-SVS
-
The vibration sensor module performs calibrated averaging (root mean squared) vibration measurement with analog voltage and digital serial outputs. Because acceleration signals are extremely fast by nature, they require high speed sampling and computationally intensive processing to measure.
-
Product
Machine Vision Camera - 0.4 MP, 291 FPS, Sony IMX287, Color
Blackfly S GigE
-
The Blackfly® S leverages the industry’s most advanced sensors in an ice-cube form factor. It is packed with powerful features enabling you to easily produce the exact images you need and accelerate your application development. This includes both automatic and precise manual control over image capture and on-camera pre-processing. On-camera features including IEEE1588 clock synchronization and full compatibility with popular third-party software supporting GigE Vision, gives system designers the tools to quickly develop innovative solutions. GigE models featuring Lossless Compression (LLC) are also available with higher maximum frame rates and lower bandwidth requirements, helping maximize output without compromising image quality. The Blackfly S is available in GigE, USB3, cased, and board-level versions.
-
Product
EMC Actuating Unit for Gas+Brake+Clutch Pedal
PSE-GBK
-
Pneumatically operated actuator for operation of accelerator, brake and clutch pedal in vehicles. External set-point of the pedal actuator position and brake pedal force via analog voltage to closed-loop pressure regulator in external valve box.
-
Product
Lattice SensAI Studio
-
Graphical interface based tool to help users built accelerated machine learning applications quickly. Select from a range of models pretrained to cover popular use cases, bring in your own data for additional training, validation the quality of training using TensorBoard, compile for Lattice’s FPGAs*Model Zoo with variety of models based on multiple architecture*Easy to use labeling, training, and compilation GUI*Docker container provided for installation on your own machine or server*Free license
-
Product
Energy Storage
-
Energy storage is the backbone of the modern power system, delivering reliable, high quality energy for utilities, data centers, industry, and communities. It unlocks the full potential of renewable and clean energy, ensuring critical operations stay continuously online in an always on economy while accelerating the electrification of everything.
-
Product
Personal Dose Alarm Meter
DP802i
-
DP802i type X - gamma radiation detector - as a super humanized design and enhanced personal dose monitoring is mainly used for X, gamma rays and hard beta rays of radiation protection monitoring, suitable for nuclear power station, the accelerator, isotope applications, industrial X, gamma NDT, radiation source treatment, medical treatment, cobalt gamma irradiation, radioactive laboratory, nuclear facilities around environmental monitoring field, timely, ensure to my warning safety of staff; The instrument can be also measured dose rate and cumulative dose. It USES reactive new single chip microcomputer, the compensation for the probe, the instrument GM counting pipe has a wide measurement range, better energy response characteristics, and with overload directives and protection function.
-
Product
Packaged Freight Transport Environment Data Recorder
-
A recorder for recording actual traveling vibration acceleration data for electric servomotor type 3-axis vibration tester.
-
Product
ALD Research
-
Veeco’s ALD Research page is a hub for the latest thinking in atomic layer deposition. It brings together experimental data, modeling insights and collaborative breakthroughs that help engineers stay ahead of the curve. Whether exploring new chemistries or solving complex process challenges, this resource is designed to inform, inspire and accelerate thin-film innovation.
-
Product
HALT – Highly Accelerated Life Test
-
HALT is a process used on electronic assemblies and modules to determine weaknesses and the stress limits of a product by temperature cycling and omni-axial random vibration step stress. Inherent weaknesses in a products design and build are stimulated by applying increasing levels of mechanical stress. Within an accelerated timescale, faults in a product can be realised prior to product release and preventing failures occurring during after-sale user operation, very often during the warranty period.
-
Product
4G, 3G and 2G Device Testing
-
Wireless network emulators enable the entire mobile device ecosystem to accelerate delivery of 5G new radio (NR) products.
