Product

Stand-Alone Test Fixture

MA 2013/D/H/Pylon

-

INGUN Prüfmittelbau GmbH

MA 2013/D/H/Pylon - INGUN Prüfmittelbau GmbH

Parallel contact stroke: 15 mmContact force max.: 2000 NInterface block required: NoInterface signals max.: 1700Component on PCB: 58 mmPressure frame unit-opening angle: 75Installation height test probe top: 16,0 mmInstallation height test probe bottom: 10,5 mmInstallation height dual-stage test probe bottom: 16,0 mmweight: 24,00 kg

Product

EMI Tester

-

Peritec Corp.

Peritec Corp.

The EMI tester automatically measures the noise distribution of the electric field and　 the magnetic field radiated from electronic equipment with high accuracy.・ Even if PCB and IC parts have complicated bumpy shape and surface. 　 The movable assembly can automatically trace them.・ EMI noise distribution is expressed as a variety of maps, such as 4D/3D/2D graphics 　 and cross section view.

Product

BGA Rework Station

PDR IR-E3 Evolution

-

PDR Rework

PDR IR-E3 Evolution - PDR Rework

The PDR IR-E3 SMT/BGA rework system, using PDR’s patented Focused IR technology, has been specifically designed to cope with the challenges of repairing today’s PCB assemblies.

Product

ABex Terminal Module for Göpel 1149Cx-FXT BSCAN Cards

ABex TM-1149Cx-FXT

-

Konrad Technologies GmbH

ABex TM-1149Cx-FXT - Konrad Technologies GmbH

The ABex TM-1149Cx-FXT is an ABex terminal module for the Göpel Boundary Scan Controller SFX/PXI(e) 1149/C4-FXT-X. It is connected to the BSCAN-Controller with an adapter-paddle-card.In combination with the above Göpel Boundary scan card it’s possible to connect up to four JTAG/Boundary Scan TAPs. All differential signal wires on the PCB are impedance controlled. In addition, all other digital signals (PIP, TRG, Aux, I/O) and Ground can be switched off via relays.

Product

Reed Relays

-

Sanyu Electric, Inc.

Sanyu Electric, Inc.

TPM Reed Relays - surface mount, high breakdown voltage, high temperature operate, high density, miniature PCB through hole, standard PCB through hole, EMF low thermal, high insulation/dry, high insulation/wet, high insulation/high voltage, DIP/dual in-line package, SIP/single in-line package, multiplexer, and more.

Product

Motorized Potentiometer

Mounting On Circuit Board Or DIN Rail

-

INELTA Sensorsysteme GmbH & Co. KG

Mounting On Circuit Board Or DIN Rail - INELTA Sensorsysteme GmbH & Co. KG

*PCB mounting*Suitable as: setpoint device or rotary actuator*Compact in design* Robust aluminium housing* Gear safety clutch

Product

Manual Test Press Fixture

750/752 Series

-

Robson Technologies, Inc.

750/752 Series - Robson Technologies, Inc.

RTI's manual test presses are compact, portable, all-inclusive, and easy to use. Single lever operation and 100% vertical compression makes the manual test press an ideal solution for PCB, hybrid module, and high pin count device-level testing when complex test requirements cannot be met with a test socket and breakout board alone.

Product

Immunoassay Test Kits

-

Hach Lange GmbH

Hach Lange GmbH

Immunoassay test kits can detect PCBs in soil, water, and wipe samples. Quantitative test kits have been developed for specific Aroclors, and several kits can measure the overall concentration of a mixture of Aroclors, i.e., total PCBs.

Product

20-Pin PLCC-to-16-Pin DIP Adaptor

16-304633-18

-

Aries

16-304633-18 - Aries

20 PIN PLCC TO 16 PIN DIP ADAPTER FOR MOTOROLA MC12009 AND OTHERS. A cost effective means of upgrading to PLCC Package without changing your PCB layout.

Product

EDFA

SEM1550 Series EDFA Module

-

Hangzhou Softel Optic Co., Ltd.

SEM1550 Series EDFA Module - Hangzhou Softel Optic Co., Ltd.

*Adopts JDSU or Oclaro pump laser.*Adopts OFS fiber.*SMT production process to assure small size and low power consumption ,but high stability*Micro monitor PCB*Output adjustable(-4~+0.5)*Max outputs 23dBm(single pump laser).

Product

Fast Electromagnetic Analysis Suite

FEMAS

-

EMS-PLUS

FEMAS - EMS-PLUS

FEMAS was created to provide tools for engineers to assist in PCB and system design. Our tools are based on full wave solutions to Maxwell's equations but operate much faster than traditional CEM tools. Multi-Functional! End-to-End Link Path Analysis. S-parameter file concatenation. Time Domain analysis. Frequency Domain analysis. Transmit/Receive Equalization. Causality/Passivity Checking/enforcement. 2D Cross Section Analysis for multi-conductors. S-parameter and waveform plotting. Network parameter conversion. De-Embedding. Signal Analysis.

Product

BME680 Environmental Sensor

28061

-

Parallax Inc.

28061 - Parallax Inc.

Raise your project’s environmental awareness with the BME680. The Bosch Sensortec BME680 Integrated Environmental Unit combines a gas sensor with air pressure, humidity, and ambient air temperature sensing functions within a single package for high performance air quality measurement.  Parallax Inc. places the BME680 on a compact PCB with a 6-pin male header. This capable sensor does not have to be difficult to use. The BME680 is supported by BlocklyProp visual programming as well as C libraries for the Propeller multicore microcontroller.  Code for other controllers is available from the Bosch Github repository.

Product

Cryogenic 4K Probe Cards

-

Celadon

Celadon

Over the last 20 years the Celadon Engineering team has developed an expertise in cryogenic materials which has resulted in a solid reputation in the industry for producing extremely stable cryogenic on-wafer probe cards as well as DUT probing solutions. These Cryogenic probe cards have all the benefits of Celadon’s Crash Resistant™ probe technology but with the ability to probe as cold as humanly possible. Celadon’s cryogenic solutions vary from standard VersaTile™ footprints which interface to positioners to innovate custom PCB based designs to allow for flexibility when testing at these very cold temperatures. Lakeshore cryogenic wire is used in standard DC solutions for high density cable-out designs to support high pin count applications. During the development process, Celadon works closely with the cryogenic prober vendor to ensure the integrated solution is optimized for current and future testing needs.

Product

Advanced Diagnostics for ScanExpress™ JET JTAG Embedded Test Solutions

ScanExpress JET Advanced Solutions

-

Corelis, Inc.

ScanExpress JET Advanced Solutions - Corelis, Inc.

ScanExpress JET advanced diagnostics add additional diagnostic resolution with fully automated analysis translating functional test results to down to the net and pin level, even with BGA packages.The seamless integration with ScanExpress JET and ScanExpress Runner as well as the ability to output ScanExpress Viewer fault reports for PCB visualization make ScanExpress JET Advanced Diagnostics a must-have tool for any JTAG test system.

Product

Module Spectrum

nRF52840 Series

-

Raytac Corp

nRF52840 Series - Raytac Corp

Raytac nRF52840 module spectrum covers MDBT50Q-1MV2, MDBT50Q-P1MV2 and MDBT50Q-U1MV2 series with Chip Antenna, PCB Antenna and u.FL connector for External Antenna option for selection.

Product

3D Solder Paste Inspection

aSPIre 3

-

Koh Young Technology

aSPIre 3 - Koh Young Technology

Industry-leading measurement accuracy and inspection reliability- Perfect solution to eliminate shadow problems, base plane settings, and problems with projection direction- Full 3D foreign material inspection solution for the entire PCB- High productivity through the highest accuracy

Product

PCB GPTA02, 10 mV/g, IEPE, 1 Hz to 5 kHz, Accelerometer, Triaxial Vibration Sensor

784169-01

-

NI

784169-01 - NI

The PCB GPTA02 helps you acquire sound and movement data with supported PXI Sound and Vibration Modules, C Series Sound and Vibration Input Modules, and USB-based Sound and Vibration Devices. This sensor uses the Integrated Electronics Piezo-Electric (IEPE) current excitation. The PCB GPTA02 features a sensitivity range of 10 mV/g and requires a 4-socket plug-to-3 BNC plug cable.

Product

PCB Triaxial Accelerometer, 1000mV/g, ICP®(IEPE), 0.5Hz-3kHz

784815-01

-

NI

784815-01 - NI

The PCB Miniature Triaxial Accelerometer helps you acquire sound and movement data with supported PXI Sound and Vibration Modules, C Series Sound and Vibration Input Modules, and USB-based Sound and Vibration Devices. This sensor uses the Integrated Electronics Piezo-Electric (IEPE) current excitation. The PCB Miniature Triaxial Accelerometer features a sensitivity range of 1000 mV/g and requires the PCB lightweight cable with 4-socket plugs.

Product

PSS PCB Tester

MS 1106

-

Meltronics Systemtech

MS 1106 - Meltronics Systemtech

PSS PCB Tester is a powerful system used to test and validate DAWN (RWR & JAMMER) Support System boards. It has RS232/USB Communication for PC Interface.