Filter Results By:

Products

Applications

Manufacturers

Energy

"the capacity for work"

See Also: Thermal, Chemical, Electrical, Nuclear, Electromagnetic


Showing results: 886 - 900 of 1278 items found.

  • Solar Pump Inverter

    45-100kw - Shenzhen Setec Power Co., Ltd.

    Solar pumping system is composed of a solar array,a pump and a solar pumping inverter. Based on the design philosophy that it is better to store water than electricity , there is no energy storing device such as storebattery in the system. The solar array,an aggregation of many solar modules connected in series and parallel , absorbs sunlight radiation and converts it into electrical energy , providing dynamical water for the whole system. The pumping inverter controls and adjusts the system operation and converts the DC produced by solar array into AC to drive the pump , and adjust the output frequency intensity to realize the maximumpower point tracking (MPPT) . The pump, drive by 3-phase AC motor,can draw water fromthe deep wells or rivers and lakes to pour into the storage tank or reservoir , or directly connect to the irrigation system ,fountain system,ect. According to the actual systemdemand and installation conditions,different types of pump such as centrifugal pump, axial flow pump,mixed-flow pump or deep-well pump can be used.

  • Solar Pump Inverter

    22-37kw - Shenzhen Setec Power Co., Ltd.

    Solar pumping system is composed of a solar array,a pump and a solar pumping inverter. Based on the design philosophy that it is better to store water than electricity , there is no energy storing device such as storebattery in the system. The solar array,an aggregation of many solar modules connected in series and parallel ,  absorbs sunlight radiation and converts it into electrical energy , providing dynamical water for the whole system. The pumping inverter controls and adjusts the system  operation and converts  the  DC produced  by  solar array  into  AC  to drive the pump ,  and adjust  the output  frequency  intensity to realize the maximumpower point tracking (MPPT) . The pump, drive by 3-phase AC motor,can draw water fromthe deep wells or rivers and lakes to pour  into the storage tank or reservoir , or directly connect to the irrigation system ,fountain system,ect. According to the actual systemdemand and installation conditions,different types of pump such as centrifugal pump, axial flow pump,mixed-flow pump or deep-well pump can be used.

  • Infrared Temperature Converter

    TF Series - Chuan Sheng Electronics Co., Ltd.

    TF series, infrared temperature converters provide non-cotact measurement to caculate the surface temperature of the objects by measuring the energy of infrared light. So It is convenient to measure the surface temperature of especially moving objects. Its stainless case with integrated design combining sensors, optical system, and electronic circuits. It is easy to install by connecting the screw with other devices, and TF can be used in a wide range of industries.

  • Portable Three Phase Phantom Load Power Source

    SY2103 - Hong Kong Songyang Industrial Ltd.

    The new SY2103 series portable three phase phantom load stable power source, designed from new digital wave compound technology and according to International Standard, is newly intelligent equipment for energy meters. The equipment includes voltage/current source & standard meter, operated easily through front panel to preset directly all data of meter under test and test process.

  • PQ Meters

    Algodue elettronica

    Additional voltage and current measurement channels in comparison with other standard three-phase devices.Current inputs for CTs or for clamps to grant an accurate current measurement.Continuous monitoring of the power quality and Class A certified measurements for voltage characteristics.Simultaneous recording of events, Min/Avg/Max LOG and energy counters.Several possibilities for instrument data transmission: Ethernet, Modbus TCP, 3G network.User-friendly instrument web interface with multilingual pages.

  • A/D & D/A

    Vadatech Inc

    VadaTech has one of the most extensive portfolios of A/D and D/A converters in the industry, in a range of form factors and a variety of channel and sampling rate options to meet all your data acquisition needs. Our ADC and DAC are widely used in high energy physics, military, aerospace and industrial applications thanks to variants based on MicroTCA.4, MicroTCA.0, FMC, OpenVPX and AdvancedTCA (ATCA).

  • Alpha Spectroscopy

    ORTEC

    Alpha spectroscopy is used to identify and quantify radionuclides based on the alpha particles emitted in the decay process. Similar to Gamma Spectroscopy, energy spectra are generated with high precision detectors and electronics and analyzed with special software. Typically, samples are measured following chemical separation to isolate the radionuclides of concern due to the complexity associated with correcting for these interferences with spectrum analysis software as is common for many Gamma Spectroscopy measurements.

  • Thermal Mass Flow Meter

    ACCU-FLO METER - LANDTEC

    With an innovative edge, the LANDTEC ACCU-FLO Meter highlights a distinctive feature: A Zero Calibration User Check. The User Check allows the operator to verify that their LANDTEC ACCU-FLO Meter has not shifted, drifted or deviated from its original NIST-traceable Factory Calibration value. This ability makes the ACCU-FLO Meter unique, extremely useful on Gas-to-Energy projects, environmental compliance and essential for the carbon credit market.

  • Tenney Walk-In Environmental Test Chamber

    Tenney Environmental

    Tenney’s multipurpose environmental walk-in room is the perfect test site for everything from testing against humidity, temperature and various climate conditions. This walk-in chamber provides supreme temperature testing for large components and equipment. When your testing requires walk-in rooms, choose Tenney. Our test rooms feature automated process control, energy efficiency, and a vast range of features and options.

  • CO2 Concentration and Temperature Transmitter

    T8248 - COMET SYSTEM, s.r.o.

    CO2 concentration and temperature transmitter with two 0-10V outputs is specially designed for use in exacting interiors in building energy management and HVAC systems. It designed for easy installation on ordinary KU68 wiring boxes for household switches and sockets. Large dual line LCD is possible to switch off.Computerized design ensures long term stability and fail indication. Transmitter is designed for use in non-aggressive environment.

  • Towing Dynamometer

    RS-25K - Taylor Dynamometer, Inc.

    RS-25K Towing Dynamometer is designed fortesting today’s full-sized SUVs and light trucks. The RS-25K is builtwith a heavy-duty steel frame, an aerodynamic body and rides on anindependent, air ride suspension using two eddy current absorberswith special high temperature coils to absorb energy. The RS-25K ispowered by an industrial generator so there are no lead-acid batteriesto charge and testing time is unlimited at low speeds.

  • Revenue Meter

    Ci20 - Ametek Power Instruments

    AMETEK's Ci20 Revenue Meter watches over your energy investment in many ways. It has high accuracy measurements, site diagnostics and multiple communication options to ensure maximum usability. Your installation investment is reduced with our innovative software wizard that provides quick set-up and configuration. Inventory and ordering is implified with field upgradeable options using soft switches and plug in boards.

  • Portable Ultrasonic Flowmeter

    Gentos Measurement & Control Co.

    As one of the most professional portable ultrasonic flowmeter manufacturers and suppliers in China, we're featured by quality products and low price. Please rest assured to buy discount portable ultrasonic flowmeter in stock here from our factory. For customized service, contact us now. Cleaning System Flowmeter, Building Management System Energy Flow Meter, Condensate Water Ultrasonic Flow Meter

  • Phased Array Ultrasound Instrument

    TOPAZ64 - Zetec, Inc.

    TOPAZ64, a fully integrated, portable 64 channel Phased Array UT device delivering faster, more reliable inspections. It intelligently combines the power of 64 active channels for Phased Array UT applications with the industry’s most advanced Full Matrix Capture (FMC) and Total Focusing Method (TFM) capabilities. Bipolar pulsers provide more energy to punch through thick components.

  • BLE Dev board w/Temp, Humidity, Ambient Light & Accelerometer Sensors

    Bluey - Electronut Labs

    Bluey is a BLE (Bluetooth Low Energy) development board with Temperature, Humidity, Ambient Light and Accelerometer sensors. Bluey uses the Nordic nRF52832 BLE SoC (System on a Chip) which has an ARM Cortex-M4F CPU and a 2.4 GHz radio that supports BLE and other proprietary wireless protocols. It also supports NFC, and in fact the board comes with a built-in NFC PCB antenna. Open Source

Get Help