Magnetic Flux
See Also: Magnetic, Magnetic Test, Magnetic Field, Magnetic Head, Magnetic Susceptibility, Magnetic Stripe, Magnetic Permeability, H-field, Gauss, Nanotesla, Flux Meters, Fluxmeters
-
Product
Magnetic Flux Leakage Testing
-
PRÜFTECHNIK Condition Monitoring GmbH
NOVAFLUX - Flux Leakage Inspection for Black or Bright Steel Bars
-
Product
DC Magnetic Flux Leakage Testing
ROTOMAT / TRANSOMAT Product Family
-
Foerster Instruments, Incorporated
With the new generation ROTOMAT DA and TRANSOMAT DA flux leakage test systems FOERSTER is setting new standards in continuous quality assurance of ferromagnetic steel tubes. The test systems enable the reliable detection of natural and oblique defects, regardless of their angle or length, in addition to standardized longitudinal and transversal defects. The miniaturization of sensors together with highly integrated electronic components dramatically increases the number of channels. This makes a more precise and finer scan of the surface possible, giving a more complete set of information regarding detected defects. The newly introduced C-Scan visualizes these defects in high-definition and real-time, resulting in a completely new evaluation of the tubes to meet rising quality requirements.
-
Product
Advanced Handheld Tachometer
FT-7200
-
The FT-7200 Advanced Tachometer is an easy-to-use handheld digital tachometer offering high functions and performance. The use of FFT (Fast Fourier Transform) technology enables the FT-7200 to perform frequency analysis of rotation speed by using change of signal in sound, vibration or magnetic flux from rotating machines such as a motor or the like. Selection from 5 kinds of measurement modes allows it to calculate and display rotation speed of any complex waveform signals from a sound level meter or an accelerometer accurately by extracting the exact frequency component.
-
Product
Hall Effect Measurement system
HMS-3300
-
Magnetic flux density : 0.55Tesla (+/-0.03T)Gap distance between both round magnets : 26mm / Round magnet diameter : 50mmMeasurable temp : RT ~ 300℃(model# HT55T3). Resolution : 0.1℃(Model# HT55T5 : RT ~ 500℃)Both HT55T3 and HT55T5 are only capable of using with HMS-3000 main body.(Not compatible with HMS-5000 )- You can flow purge gas into small chamber and measure hall effect at the same time. Gas control valve can be installed as an option.
-
Product
Flux Meter and Measuring Coils
-
MAGNET-PHYSIK Dr. Steingroever GmbH
The measurement of magnetic quantities can almost always be traced back to the measurement of a magnetic flux. The electronic fluxmeter is therefore the most versatile measuring instrument in magnet technology as a measuring instrument for magnetic flux. The fluxmeter is operated together with a measuring coil.
-
Product
Continuous Magnetic Measurement Equipment
CWM
-
The automatic measurement equipment to continuously measure magnetic property in commercial power frequency of magnetic steel sheet sample on line, is used for quality control. Core loss in definite time of magnetic flux density [B] or magnetic flux density [B] in definite time of strength of magnetic field [H] for excited magnetic steel sheet is measured on line.
-
Product
Zero Field Cavity
-
Zero field cavities generate a zero magnetic field in an air gap. They are mainly used to calibrate hall probes for their zero scale value of output for the magnetic field strength H or the magnetic flux density B they measure. For example Gaussmeters can be calibrated by using Zero Field Cavity.
-
Product
Flux Meter
-
STAR TRACE SOLUTIONS PVT. LTD.
Star Trace Pvt. Ltd. is a renowned manufacturer and supplier of unbeatable quality Magnetic Field Flux Meters. The company manufactures these Magnetic Flux Meters from top-grade raw materials to ensure quality and performance. In order to ensure customers' satisfaction, these Magnetic Flux Meters are sent for several stringent quality control tests before supplying and exporting them to customers.
-
Product
Hall probes
-
Axial, transverse, multi-axis, and tangential Hall probes for measuring magnetic flux density. Choose from a wide range of lengths and thicknesses—probes are also available for cryogenic applications.
-
Product
Fluxmeter
DX-201
-
DX-201 digital fluxmeter is a precise magnetic measuring instrument, adopted low drift electronic integrator design and production. The most important features are test response quick, without data lose in the testing process. In the process of test samples flux by the Czochralski method, fast pull and slow pull datas are consistent, fine features especially shows in repeated measurements and regression testing. It can measure magnetic flux or magnetic moment matched with different fixtures according to users’ requirements.
-
Product
Polarity Tester
PT-1
-
International Electro-Magnetics, Inc.
The PT-1 provides a simple and easy way to determine the relative polarity of coil windings. It allows for an in-process test that takes a minimum of time to perform. By placing a coil on the platform and making connection to the start and end of a winding, a test signal is induced in the winding. The induced signal is low level and completely safe for the operator. By comparing the test signal phase of the coil under the test output, the relative polarity is indicated by the Red/Green LED. The tester operates by inducing a signal voltage in the coil under test by means of a magnetic flux field. The field is generated by a coil located in the probe base. The coil configuration is designed to provide optimum field distribution. We have also applied this basic circuit to a 5-channel scanning unit.
-
Product
Fluxmeters
-
Hirst Magnetic Instruments Ltd
Fluxmeters measure the total magnetic flux in a volume contained within a coil (such as a Helmholtz coil) whereas a gaussmeter measures the total flux density at a point where the probe is located.
-
Product
Probes for Tube Inspection
-
Probes for tube inspection are lightweight but solidly constructed eddy current, remote field, magnetic flux leakage, and IRIS ultrasound. These probes are used for ferromagnetic or non-ferromagnetic tube inspection applications.
-
Product
D.C. Recording Fluxmeter
TRF
-
This is the equipment being able to measure direct current magnetization property of wide-ranging magnetic materials from soft magnetic materials to high performance permanent magnet with magnetic flux meter based on M integral closed magnetic circuit system.
-
Product
Advanced Tachometer
FT-2500
-
FT-2500 advanced tachometer measures the rotational speed by using the signal of change in sound, vibration or magnetic flux from rotating machines such as motor or the like.The use of FFT technology enables the FT-2500 to calculate and display the rotational speed of any complex waveform signals from microphone, sound level meter or vibration sensor by extracting the frequency component which is equivalent to the rotational speed.
-
Product
Fluxmeter
-
Measures changes in magnetic flux, as detected through a Helmholtz or similar coil arrangement.
-
Product
L.V.D.T Products
-
Columbia Research Laboratories
Columbia's L.V.D.T.'s are designed for the most demanding high temperature military and industrial applications where maximum life under adverse conditions is required. The corrosion resistant stainless steel housing provides effective shielding to contain the magnetic flux within the transformer, as well as providing protection against external magnetic fields. Conservative design permits the use of these transducers well beyond their specific linear range with minimum loss of accuracy.
-
Product
Motor/Gasoline Engine RPM Detector
OM-1500/1200
-
The OM-1500/1200 motor/gasoline engine RPM detector is designed for rotation measurement of a gasoline engine and an EV/HEV motor. It detects magnetic flux leakage from the motor itself or the engine’s ignition coil.This easy to use and durable detector can measure engine rotation by attaching in parallel with the ignition coil. When the EV/HEV motor rotation is measured, attach the OM-1500/1200 perpendicular to the motor rotating shaft.It is used with the engine tachometer by Ono Sokki (GE-2500, AR-7240B, CT-6520B, HT-6200, SE-1620, FT-2500, FT-7200).
-
Product
Magnetic Particle Inspection
-
Shanghai Xianda Denshijiki Industry Co.,Ltd
Using the "leakage magnetic flux" phenomenon generated from the scratches, the magnetic powder (or fluorescent magnetic powder) of the ferromagnetic material scattered on the surface by magnetizing the specimen is adsorbed to the scratch. Observe this and detect scratches.
-
Product
Electromagnet
-
The electromagnet can generate strong magnetic fields for experimental applications. Depending on the required magnetic flux density and Equipment under test volume the air gap can be adjustedcontinuously. The magnet poles come with conical shape close to the test volume to improve accessability and to optimize the achievable magnetic flux density.
-
Product
Magnetic Transducers With Hybrid 1-/ 2-/ 3-Axis Hall Probe Sensors
H3B
-
The **H3B Magnetic Transducer** is an advanced Low Noise SENIS device designed for measuring magnetic fields through its hybrid three-axis Hall Probe. With a remarkable capacity for ultra-low noise, it effectively minimizes offset fluctuations, ensuring precision in magnetic field measurements. This robust transducer is tailored for applications that demand high accuracy and stability, integrating three high-resolution Hall sensors with an orthogonality error of less than 2°. Additionally, a built-in temperature sensor provides real-time temperature compensation, enhancing measurement reliability across various conditions.Beyond its noise reduction capabilities, the H3B transducer delivers a comprehensive output of three differential voltages corresponding to the magnetic flux density components (Bx, By, Bz) and a ground-referred voltage signaling the Hall sensor's local temperature. The system's innovative spinning-current technique significantly reduces low-frequency noise while maintaining excellent linearity, making it a valuable instrument for mapping magnetic fields, characterizing undulator systems, and performing quality control in laboratory and industrial settings.
-
Product
Microprocessorized fluxmeter
MSM-101
-
Mobile meter designed to measuring the quasi-static changes of magnetic flux association with induction sensors. The minimal range of meter is equal 0.001Wb/V and drift under 7x10-6Wb/min.
-
Product
Hall Probe S
-
The Hall Probe S for H3A Magnetic Transducers is an advanced hybrid device designed for high precision in magnetic field measurements across 1-, 2-, or 3-axis configurations. This exceptionally robust Hall probe integrates high-resolution Hall sensors arranged along the axes, ensuring accurate readings with an orthogonality error of less than 2°. With dimensions measuring 10 x 10 x 1.4 mm, this probe is built to withstand mechanical and electrical stresses, being securely mounted on a reference ceramic plate that guarantees stability during operation. The inclusion of a temperature sensor enables temperature compensation, further enhancing measurement accuracy. Its high-level analog voltage outputs correspond symbiotically to the variations in the magnetic flux density and temperature, making the Hall Probe S a versatile tool suitable for intricate scientific and industrial applications. The low noise and offset fluctuation properties of this sensor facilitate ultra-high resolution measurements, ensuring fidelity in field readings. This device is integral to the H3A Magnetic Field Transducer and Digital Teslameter modules, highlighting its critical role in advanced magnetic field surveying.
-
Product
Digital Teslameters/Gaussmeters
-
S Digital Teslameters offer accurate, high resolution measurement of magnetic flux densities, withdirect digital readout in tesla or gauss, and serialcommunications by fiber optics or RS-232C for system applications.The instruments are light and compact, and the probes are easy to use. The DTM-151 has been engineered to withstandthe severe electrical interference produced by high voltage discharge.
-
Product
Magnetic Field and Permeability Measurement
MAGNETOSCOP® 1.070
-
Foerster Instruments, Incorporated
The MAGNETOSCOP 1.070 is a portable magnetometer system with microprocessor and probes for measuring the magnetic flux density as an absolute or differential value (gradient). It has a USB port for simple data transfer and an SD card for saving measurement data and parameters. The measuring system also facilitates the recognition and saving of peak values and the adjustment of thresholds for limit values. The unit can be used for series and individual measurements. The data can be easily analyzed and documented with the PC software included in the scope of delivery. The MAGNETOSCOP 1.070 thus facilitates the portable and fast measurement of the relative permeability within the scope of the quality control of stainless steel and low-permeable (non-magnetic) alloys as well as the localization of ferrite enclosures. Changes in material (sulfidation, degradation of lamination, structural changes) can also be proven thanks to permeability comparative measurements.
-
Product
Multi-Probe Magnetic Transducer
-
The Multi-Probe Magnetic Transducer (MPMFT) is an advanced multichannel measurement device designed for precise magnetic flux density-to-analogue voltage conversion. Tailored specifically for the F3B and F1A Hall probe types, this transducer system accommodates up to 10 individual transducers simultaneously. Equipped with up to six SENIS F1A Single-Axis Hall probes, this system excels in multi-point monitoring of complex electromagnetic systems, providing a high-accuracy, temperature compensated output signal for the Y component of the measured magnetic flux density. Whether it’s for quality control in the development of magnet systems, or for laboratory applications, the MPMFT guarantees superb reliability and precision.
-
Product
Magnet Temperature Characteristics Apparatus
TDF
-
Evaluation of thermal stability of varieties of permanent magnets including rare-earth permanent magnet. TDF-5-200auto This apparatus automatically measures and analyzes reversible temperature coefficient(a) and irreversible temperature coefficient (Flux loss ?f) of magnetic flux density of rare-earth permanent magnet in the wide range from low to high temperature.
-
Product
Field Strength Measuring Instruments and Sensors
-
MAGNET-PHYSIK Dr. Steingroever GmbH
Field strength measuring devices are measuring devices for measuring the magnetic flux density B (formerly also called induction) and the magnetic field strength H of direct and alternating fields. They are also called Gaussmeters or Teslameters.
-
Product
Magnetic Field Transducer With Integrated 1-Axis (By) Hall Probe
I1A
-
The I1A Magnetic Field Transducer with Integrated 1-axis (By) Hall Probe is designed to measure magnetic fields perpendicular to the probe plane with exceptional accuracy and precision. This transducer is renowned for its low noise and minimal offset fluctuations, ensuring reliable measurements in various applications. The small form factor of the integrated Hall element, measuring just 22 μm x 22 μm, yields remarkable spatial resolution, making it ideal for tasks such as magnetic field mapping and characterization of permanent magnets. Coupled with its integrated temperature sensor, this device allows for effective temperature compensation, greatly enhancing measurement consistency.The I1A transducer excels in different magnetic flux density ranges, including ±0.1T, ±0.2T, ±1T, and ±5T, which can accommodate a variety of applications from laboratory research to on-line quality control in production environments. With an output voltage that is high-level differential and proportional to the measured transverse magnetic flux density, it ensures accurate data transfer. The built-in modules for conditioning signals include features for amplification, non-linearity correction, and sensitivity adjustments that compensate for temperature variations, further enhancing its performance in real-world applications.
-
Product
Magnetic Field And Permeability Measurement
MAGNETOMAT 1.790
-
Foerster Instruments, Incorporated
The MAGNETOMAT 1.790 is a measuring system for the precision detection of magnetic flux density and relative permeability. The MAGNETOMAT software is used for displaying the measured values and saving and exporting data. The wide range of probes facilitates optimal adjustment to the conditions of the application, such as the measurement of relative permeability within the scope of the quality control of stainless steel and low-permeable (non-magnetic) alloys. Further applications include the long-term monitoring of the magnetic environment, e.g. prior to installing magnetically sensitive devices, and the localization of ferrite enclosures in stainless steel and NE materials. Changes in material (sulfidation, degradation of lamination, structural changes) can also be proven thanks to permeability comparative measurements.
