Magnetic Material Test Fixture

Magnetic Material Test Fixture

16454A - Keysight Technologies

The 16454A is designed for accurate permeability measurements of toroidal-shaped magnetic materials. Since the construction of this fixture creates one turn around the toroid (with no magnetic flux leakage), the need of winding a wire around the toroid is unnecessary. Complex permeability is calculated from the inductance with and without the toroid. When the E4991A/4291B with option 002 is used as the measurement instrument, direct readouts of complex permeability are possible. In addition, it is furnished with a small and a large fixture to adapt to a wide range of sizes.

Product Home Contact/Sales Datasheet Company Catalog Share Add To List

Topics

Family

Test Fixtures & Test Sets

Keysight Technologies

Keysight test fixtures are used to hold electronic components or materials (physically and electrically) in order to perform various measurements. Keysight offers a variety of test fixtures from Parametric, Dialectrice, Liquid test fixtures and more.Some of our test fixtures allow you to connect directly to your measurement instrument, while others require various adapters.

Product Home Contact/Sales Company Catalog Share Add To List
Test Fixture

N1295A - Keysight Technologies

The Keysight N1295A Device/Component Test Fixture provides a low-cost solution to quickly and easily test packaged devices and components. For more advanced packaged testing needs, the Keysight 16442B Test Fixture provides more capabilities.

Product Home Contact/Sales Company Catalog Share Add To List
Test Port Adapter Set, 3.5 Mm (Test Port) To Type-N

85130C - Keysight Technologies

The Keysight 85130C test port adapter is designed to protect the test set port when it would be directly connected to the device under test. These adapters have a special rugged female connector designed for connecting to the network analyzer test port. This special connector will not mate with a standard male connector, but converts the rugged test set port to a connection that can be mated with the device under test. The set contains a 3.5 mm to type-N male adapter and a 3.5 mm to type-N female adapter. The frequency range for these adapters is dc to 18 GHz with a return loss of 28 dB or better.

Product Home Contact/Sales Company Catalog Share Add To List
Test Port Adapter Set, 3.5 Mm To 3.5 Mm

85130D - Keysight Technologies

The Keysight 85130D test port adapter protects the test set port from being directly connected to the device under test. These adapters have a special rugged female connector that connects to the network analyzer test port. This special connector does not mate with a standard male connector but converts the rugged test set port to a connection that will mate with the device under test. This set contains a 3.5 mm to PSC-3.5 mm male adapter and a 3.5 mm to PSC-3.5 mm female adapter. The frequency range for these adapters is dc to 26.5 GHz with a return loss of 28 dB or better.

Product Home Contact/Sales Company Catalog Share Add To List
Test Port Adapter Set, 2.4 Mm To 3.5 Mm

85130F - Keysight Technologies

The Keysight 85130F test port adapter protects the test set port from connecting directly with the device under test. It has a special rugged female connector designed for connecting to the network analyzer test port. This special connector does not mate with a standard male connector but converts the rugged test set port to a connection that will mate with the device under test. The set contains a 2.4 mm to PSC-3.5 mm male adapter and a 2.4 mm to PSC-3.5 mm female adapter. The frequency range for these adapters is dc to 26.5 GHz with a return loss of 26 dB or better.

Product Home Contact/Sales Company Catalog Share Add To List
Test Port Adapter Set, 2.4 Mm To 2.4 Mm

85130G - Keysight Technologies

The Keysight 85130G test port adapter protects the test set port from connecting directly with the device under test. It has a special rugged female connector that connects to the network analyzer test port. This special connector does not mate with a standard male connector but converts the rugged test set port to a connection that will mate with the device under test. This set contains a NMD-2.4 mm (f) to NMD-2.4 mm (m) adapter and a NMD-2.4 mm (f) to PSC-2.4 mm (f) adapter. The frequency range for these adapters is dc to 50 GHz with a return loss of 23 dB or better.

Product Home Contact/Sales Company Catalog Share Add To List
Test Port Adapter Set, 1.85 Mm To 1.85 Mm

85130H - Keysight Technologies

The Keysight 85130H test port adapter protects the test set port from being directly connected to the device under test. This adapter has a special rugged female connector that connects to the network analyzer test port. This special connector does not mate with a standard male connector but converts the rugged test set port to a connection that will mate with the device under test. This set contains a 1.85 mm to 1.85 mm male adapter and a 1.85 mm to 1.85 mm female adapter. The frequency range for these adapters is dc to 67 GHz with a return loss of 23 dB or better.

Product Home Contact/Sales Company Catalog Share Add To List
Test Fixture (SMD Components)

16034E - Keysight Technologies

Perform impedance evaluation on a minimum SMD size of 1.6(L) x 0.8(W) [mm]

Product Home Contact/Sales Company Catalog Share Add To List
SMD Test Fixture

16034G - Keysight Technologies

Perform impedance evaluation on a minimum SMD size of 0.6(L) x 0.3(W) [mm]

Product Home Contact/Sales Company Catalog Share Add To List
SMD Array Type LCR Test Fixture

16034H - Keysight Technologies

The 16034H is designed for impedance evaluations of array-type SMD.The minimum SMD size that this fixture is adapted to evaluate is 1.6(L)x0.8(W)[mm]. Since the tip of the measurement electrodes are very thin and the device holder is extremely flat, the device can be shifted and the measurement electrodes can contact each of the elements of the array-type component.

Product Home Contact/Sales Company Catalog Share Add To List
Parallel Electrode SMD Test Fixture

16192A - Keysight Technologies

The 16192A test fixture is designed for impedance evaluations of side electrode SMD components. The minimum SMD size that this fixture is adapted to evaluate is 1(L)[mm].

Product Home Contact/Sales Company Catalog Share Add To List
Parallel Electrode SMD Test Fixture, DC To 3 GHz

16196A - Keysight Technologies

The 16196A surface mount devices (SMD) test fixture offers excellent repeatability and usability, with accurate correlation up to 3 GHz. 16196 series fixtures are custom designed to fit specific SMD sizes (see table below), and provide repeatable DUT positioning with reliable contacts to enable stable measurement results - reducing the possibility of operator-induced error. Traditionally, SMD inductor evaluation up to 3 GHz has been difficult to implement - now with the 16196 series, it’s easy to perform accurate and repeatable measurements.

Product Home Contact/Sales Company Catalog Share Add To List
Parallel Electrode SMD Test Fixture, DC To 3 GHz

16196B - Keysight Technologies

The 16196B surface mount devices (SMD) test fixture offers excellent repeatability and usability, with accurate correlation up to 3 GHz. 16196 series fixtures are custom designed to fit specific SMD sizes (see table below), and provide repeatable DUT positioning with reliable contacts to enable stable measurement results, reducing the possibility of operator-induced error. Traditionally, SMD inductor evaluation up to 3 GHz has been difficult to implement. Now with the 16196 series, it’s easy to perform accurate and repeatable measurements.

Product Home Contact/Sales Company Catalog Share Add To List
Parallel Electrode SMD Test Fixture, DC To 3 GHz

16196C - Keysight Technologies

The 16196C surface mount devices (SMD) test fixture offers excellent repeatability and usability, with accurate correlation up to 3 GHz. 16196 series fixtures are custom designed to fit specific SMD sizes (see table below), and provide repeatable DUT positioning with reliable contacts to enable stable measurement results - reducing the possibility of operator-induced error. Traditionally, SMD inductor evaluation up to 3 GHz has been difficult to implement - now with the 16196 series, it’s easy to perform accurate and repeatable measurements.

Product Home Contact/Sales Company Catalog Share Add To List
Parallel Electrode SMD Test Fixture, DC To 3 GHz

16196D - Keysight Technologies

The 16196D surface mount devices (SMD) test fixture offers excellent repeatability and usability, with accurate correlation up to 3 GHz. 16196 series fixtures are custom designed to fit specific SMD sizes (see table below), and provide repeatable DUT positioning with reliable contacts to enable stable measurement results – reducing the possibility of operator-induced error. Traditionally, SMD inductor evaluation up to 3 GHz has been difficult to implement – now with the 16196 series, it’s easy to perform accurate and repeatable measurements.

Product Home Contact/Sales Company Catalog Share Add To List
Bottom Electrode SMD Test Fixture

16197A - Keysight Technologies

The 16197A is designed for impedance evaluations of bottom electrode SMDs. It achieves stable frequency characteristics up to 3 GHz and provides highly repeatable measurements. The Keysight 16197A supports various SMD sizes, as small as 1005 (mm)/0402 (inch) and as large as 3225 (mm)/1210 (inch). Accommodation of the 0603 (mm)/0201 (inch) size is available with option 001.

Product Home Contact/Sales Company Catalog Share Add To List
Bottom Electrode SMD Test Fixture

16198A - Keysight Technologies

Designed for impedance evaluations of bottom electrode SMDs and supports 201 (mm) and 402 (mm) sizes

Product Home Contact/Sales Company Catalog Share Add To List
Distribution Board, For 8 N181x SPDT Switches

Y1150A / 34945EXT - Keysight Technologies

Connects the 34945EXT to 8 N181x SPDT to route the power and control signals from the driver module to the switches

Product Home Contact/Sales Company Catalog Share Add To List
34945EXT Distribution Board, For Two 87104x/106x L7x0xx Multiport Or 87406B Matrix Switches

Y1151A - Keysight Technologies

The Y1150A-Y1155A distribution boards enable simple connections to the external switches. The distribution boards plug onto the 34945EXT and are used to route the power and control signals from the driver module to the switches using standard cables.

Product Home Contact/Sales Company Catalog Share Add To List
34945EXT Distribution Board, For One 87204x/206x Or 87606B Switch And Two N181x Switches

Y1152A - Keysight Technologies

The Y1150A-Y1155A distribution boards enable simple connections to the external switches. The distribution boards plug onto the 34945EXT and are used to route the power and control signals from the driver module to the switches using standard cables.

Product Home Contact/Sales Company Catalog Share Add To List
34945EXT Distribution Board, For Two 87222, L7222C Transfer Switches And Six N181x SPDT Switches

Y1154A - Keysight Technologies

The Y1150A-Y1155A distribution boards enable simple connections to the external switches. The distribution boards plug onto the 34945EXT and are used to route the power and control signals from the driver module to the switches using standard cables.

Product Home Contact/Sales Company Catalog Share Add To List
34945A Distribution Board, With Generic Screw Terminals For Driving 16 Switch Coils

Y1155A - Keysight Technologies

The Y1150A-Y1155A distribution boards enable simple connections to the external switches. The distribution boards plug onto the 34945EXT and are used to route the power and control signals from the driver module to the switches using standard cables.

Product Home Contact/Sales Company Catalog Share Add To List
10-GHz Split Cylinder Resonator

85072A - Keysight Technologies

The Keysight 85072A 10-GHz split cylinder resonator measures permittivity and loss tangent of thin film, un-clad substrates and low loss sheet materials according to the IPC TM-650 2.5.5.13 test method. Designed for robustness and ease of use, it features precision cylinders to ensure high Q factor and loss tangent resolution. Compatible with the Keysight 85071E-300 materials measurement software, the 85072A and can be purchased separately or as part of a complete turn-key solution.

Product Home Contact/Sales Datasheet Company Catalog Share Add To List
Dielectric Material Test Fixture

16453A - Keysight Technologies

The 16453A is designed for accurate dielectric constant and loss tangent measurements on the E4991A/4291A/B. It employs the parallel plate method, which sandwiches the material between two electrodes to form a capacitor. The E4991A/4291A/B measures the capacitance created from the fixure, and option 002 firmware calculates the relative complex permittivity as described in the 16451B. Adjustment to insure parallel electrodes is required when using the 16451B. This adjustment is not required with the 16453A because the fixure has a flexible electrode that adjusts automatically to the material surface.

Product Home Contact/Sales Datasheet Company Catalog Share Add To List
Dielectric Test Fixture

16451B - Keysight Technologies

The 16451B is used to evaluate the dielectric constant of solid dielectric materials accurately, and complies with ASTM D150. The 16451B employs the parallel plate method, which sandwiches the material between two electrodes to form a capacitor. An LCR meter or an impedance analyzer is then used to measure the capacitance created from the fixture.

Product Home Contact/Sales Datasheet Company Catalog Share Add To List