- Pickering Interfaces Inc.
product
37-Pin D-Type Female Solder Pin HV
92-960-037-F-HV
This accessory is designed to allow users to directly terminate a cable with soldered connections. When the product is used without a backshell users should make their own cable strain relief arrangements and ensure appropriate electrical safety precautions are observed.
-
product
3D Inline Solder Paste Inspection System
TROI 7700 SERIES
Using Moire' pattern, Pemtron's three-dimensional lead applicationdosage tester combines 2D color images with 3D measurement data toprovide more detailed, near-real PCB images, unlike traditionalcolor maps. We will also provide you with the best solution forhigh-quality and high-precision PCB production with a varietyof statistical programs, along with information you need toquickly and accurately judge positive/failure.
-
product
CyberOptics SE Series
SE Series
The CyberOptics SE Series offers the most accurate and repeatable, high speed 3D solder paste inspection in the market today. Utilizing the most advanced sensing technology, CyberOptics SPI products will provide manufacturers the reliability needed to compliment your overall screen print process improvement strategy.
-
product
2D/3D AOI Series
MV-6e
- Exclusive10MP/18MPCameraTechnology- Precision Telecentric Compound Lens Design- Eight Phase Color Lighting System- 10MP / 18MP SIDE-VIEWER® Camera System- Extremely Simple Programming and Operation- Integrated INTELLI-SCAN® Laser Inspection System- 3D Co-Planarity Inspection of Gull-Wing Leads, BGA and CSP - - -- Devices- Enhanced 3D Solder Paste Height Measurement Capability- INTELLISYS® Industry 4.0 Intelligent Factory Automation System
-
product
3D Solder Paste Inspection Machine (3D-SPI)
3Si Series
Saki's 3D SPI identifies critical defects and assists with process improvement.
-
product
3D Solder Paste Inspection (SPI)
Systems designed for solder paste inspection (SPI) quickly and reliably check the solder paste deposits on the circuit board.
-
product
3D Solder Paste Inspection system
PI Series
PI Series is a new generation 3D Solder Paste Inspection system that overcomes the limitations of traditional SPIs and satisfy all your inspection needs. The PI Series allows to easily implement Solder Paste Inspection in any PCBA line. These new generation systems are very intuitive to use, allowing non-experienced persons to get expected results.
-
product
AOI & SPI Test Systems
Xceed AOI
Most defects in the circuit-board assembly are due to the solder paste or the process of printing solder paste. Since the transition to lead-free soldering, a whole new spectrum of problems has emerged in older paste printing and its due processes. Incomplete coalescence of ball grid array (BGA) spheres and solder paste deposits are failure modes that have increased in frequency since the transition to lead-free soldering. The Xceed enables true 3D measurement and provides the most accurate and repeatable inspection results with the minimum false calls. It’s designed with Advanced Signal Processing which gives results in noise-less, clear, and accurate 3D images.
-
product
5D SPI
On Mek Solder Paset Inspection systems, items which are better inspected in 2D, such as area offset and bridging, are viewed in full colour. Using colour inspection the ISO-Spector S2 SPI can tell the difference between paste, solder mask, silk screen and other PCB features and the SPI system can intelligently give you accurate results. Volume and height measurement in 3D are combined with the 2D inspection in Real-time, to give a True colour 3D image. Other 3D SPI systems only inspect in the 3rd dimension, (Z axis) and make extrapolated assumptions about the 2D image.
-
product
3D Solder Paste Inspection (SPI)
TR7007 SII
Offering inspection speeds of up to 200 cm2/sec, the TR7007 SII is the fastest solder paste inspection system in the industry. This highly accurate inline shadow-free solder paste inspection solution offers full 3D inspection at resolutions of 15 µm or 10 µm. Built on a high precision linear motor platform, the system's hallmark features include closed loop function, enhanced 2D imaging, auto-warp compensation and fringe pattern technology. Increase capacity without sacrificing additional space with an available dual-lane configuration.
-
product
3D Solder Paste Inspection
aSPIre 3
Industry-leading measurement accuracy and inspection reliability- Perfect solution to eliminate shadow problems, base plane settings, and problems with projection direction- Full 3D foreign material inspection solution for the entire PCB- High productivity through the highest accuracy
-
product
High-speed 3D Solder Inspection Machine
YSi-SP
a high-speed 3D solder paste inspection machine that enables high-speed high-accuracy inspections based on our “1-head solution” concept for using a single type of head to handle various inspections. It is used to inspect the printing quality (volume, height, area, misalignment) of solder paste after it has been printed onto PCBs. Available April '18.
-
product
AOI & SPI, Test Systems
SigmaX SPI
Most defects in the circuit-board assembly are due to the solder paste or the process of printing solder paste. Since the transition to lead-free soldering, a whole new spectrum of problems has emerged in older paste printing and its due processes. Incomplete coalescence of ball grid array (BGA) spheres and solder paste deposits are failure modes that have increased in frequency since the transition to lead-free soldering. The SigmaXs inspection technology is unaffected by varying materials, surface conditions, or colors. The system profiles the board to generate accurate 3D shapes far superior to other brands and technologies.
-
product
Solder Paste
MVP Versa (3D SPI)
The first part of any SMT process is Paste. MVPs Versa and 900 Series platforms provide high accuracy paste inspection. High accuracy paste measurements are made using a choice of 10um or 5um 3D measurement systems.
-
product
Solder Paste Inspection
3D SPI
Checking all the relevant points in the production process is essential, especially in terms of analyzing the causes of defects, fixing them, and – most importantly – preventing them in the future. That’s why solder paste printing is of fundamental importance for manufacturing complex assemblies: If paste printing isn’t performed correctly, the defect can impact the subsequent assembly and the soldering process, resulting in a tilted component or a poor or missing solder joint.
-
product
Solder Paste Analyser
SPA 1000
The SPA 1000 also introduces new process control capability by accurately measuring the suitability of the solder paste prior to its implementation on the production line. It achieves this by determining the "Open-Time" for the paste. It also performs the Slump Test and both of these methods provide a "Go/No Go" answer in less than 30 minutes to ensure minimum delay for the production line.
-
product
Solder Paste Wetting Tester
SP-2
SP-2 is wettability testing machine forsolder paste, parts electrode and PC board,adopted SP-Tension-Method (Temperature Profile Method).
-
product
Solder Paste Printers
Shenzhen Leadsmt Technology Co.,Ltd
Is mainly used to print the solder paste to the circuit board, is one of the essential equipment in electronic manufacturing.
-
product
3D Inspection Service
The reference data may come in the form of a table, with values at specific points or features, a cad model, or 3d scan. 3D inspection services may require datum measurements, where the part to be inspected is located in a fixture that is specifically designed to orient the part by an ordered method. In some cases, the part may have features that are designed specifically to be referenced by datums, if no functional feature of the part provides a clear reference.
-
product
Dimensional Inspection (3D Inspection)
The 3D measurement data from our scanners and PCMMs offers a comprehensive definition of a physical object that is used for measurement, inspection, comparison and reporting. When a part is defined by millions of points, you can see subtle deviations, slight variations and fine details, which gives you the confidence that a part (or mold) meets your specifications. To deliver the best of both worlds, we combine 3D scanning with our contact, touch-probe measurement tools to deliver precise dimensions on geometric shapes.
-
product
3D Measurement And Inspection
LOTOS
LOTOS automatic measuring systems can measure the full outer contours or individual areas of any measurement object quickly and precisely, irrespective of the shape, and test them for imperfections. The three-dimensional, non-contact measurement is carried out using optical measurement sensors with accuracy in the μm range. The result is a representation of the measurement object as a 3D model. Powerful, intuitive software allows the measurement results to be assessed extremely quickly.
-
product
Solder Paste Inspection System
LaserVision SP3D Mini
The LaserVision SP3D Mini offers the same level of overall measurement capabilities as the VisionPro SP3D. Utilizing a lower cost microscope platform and the ability for customers to supply their own PC if needed, the SP3D Mini sets the "affordable" boundary on reliable, low cost SPI solutions.
-
product
3D Scanners
Pro
Capable of scanning objects of different shapes and sizes by changing the scanner's field of view (FOV). Due to the use of the structured light technology, professional RangeVision 3D scanners provide highly detailed scans of any type of object, from jewelry to large automobiles, with accuracy up to 0.018 mm and resolution up to 0.03 mm.
-
product
Solder Past Inspection
From the innovative Z-Check 3D through to the entry level Z-Check 100 the entire range has been designed to provide accurate pad specific measurement of solder paste deposits, adhesives and component placement. Amongst its other features the Z check software comes with the convenience of a full SPC package as standard.
-
product
3D Automated Optical Inspection System
EAGLE 3D 8800 SERIES
EAGELE 3D 8800 AOI applies 8-way projection for 3Dmeasurements to all models, minimizing shadow effectserrors and performing 100% 2D&3D examinations simultaneouslyin all FOV areas.
-
product
GENERAL INSPECTION MACHINE AFTER SOLDER MASK
DVI is a technology of automated optical inspection, which can inspect deep to the difference from semi-transparent layers or semi-reflective layers.
-
product
Inspection
A complete line of testing instruments for inspection laboratories is available from our Petrolab group. We specialize in instruments for vapor pressure, flashpoint, distillation, and color as well as equipment for hundreds of other ASTM, ISO, and DIN testing procedures. Below are a handful of items we offer.
-
product
3D Antennas
A 3D capable printing technology designed to create printed electronics directly on 3D surfaces using modern software controlled digital process.
-
product
3D LaservScanners
With unsurpassed accuracy and scan quality API’s Hemispherical Scanner is ideal for use Building Information Modeling (BIM), historical preservation and forensics.
-
product
Borehole 3D Geophones
GFA 50/100
3D borehole geo-phone is realized with 3x high sensitive geophones (nat.freq.10 Hz- 1 vertical and 2 horizontal sensors) oriented according to a triad of orthogonal Cartesian axes XYZ. Delivered with a cleat assembly to sustain its weight at the requested depth (GFA cable is graduated in meters), this borehole geophone has a pneumatic-mechanical clamping system.
-
product
3D Contact Profilometer
NanoMap-LS
NanoMap-LS with large scanning range allows to generate high resolution 3D and 2D images with a press of a button.
