Distance Meters
Measure the linear space between two points.
-
product
Laser Distance Meters
Trade your heavy tape measure for the Fluke Laser Distance Meters, which let you simply take measurements with one hand. No matter your job, the laser distance meter will help you measure farther, with greater accuracy and in more situations, saving you time and money. That''s because it lets you:
-
product
Laser Distance Meter for 60m With 10 Memories and Min. Measurement
MS-LDM360
*Measuring distance: 0.05 to 60m*Accuracy: ±1.5mm (±0.06in)*Unit conversion: mm/in/ft*Laser classification: Class 2*Laser type: 635nm <1mW*Dynamic measurement*Area, volume measurement*Pythagorean proposition measurement*Indirect measurement*Add - subtract calculation*Minimum measurement
-
-
product
Laser Distance Meters
PeakTech Prüf- und Messtechnik GmbH
This professional laser distance measuring device with multi-line LCD display, which has a backlight, was specially designed for high-precision distance measurements.
-
product
Push Pull Testers
Lever-operated manual systems enable rapid push/pull testing up to 220 lbf.Wheel-operated manual systems enable slower, more precise movement with the hand wheel up to 750 lbf.Motorized push/pull testers offer the most control and highest degree of repeatability with the ability to set a constant test speed and range of movement up to 1100 lbf.All push/pull testers can be configured with a digital force gauge with data output for analysis by data acquisition software. An optional digital distance meter to measure displacement is available.
-
product
Optical Voltage Probe
400-02
Srico’s optical voltage probe uses advanced, proprietary optical chip technology to achieve precise, interference-free measurement. Our sensor and optical fibers are made of dielectric materials. This facilitates a high degree of isolation between the voltage test point and the instrumentation system ⎯ at a safe distance of 100 meters and more. This system senses, measures, and transmits electrical data very accurately.
-
product
Laser Distance Meter for 40m With 10 Memories and Min. Measurement
MS-LDM340
*Measuring distance: 0.05 to 40m*Accuracy: ±1.5mm (±0.06in)*Unit conversion: mm/in/ft*Laser classification: Class 2*Laser type: 635nm <1mW*Dynamic measurement*Area, volume measurement*Pythagorean proposition measurement
-
product
LiFi HotSpot Evaluation Kit
The Li-Fi HotSpot Evaluation Kit allows the establishment of an optical wireless bidirectional point-to-point full-duplex data connection over medium distances in the meter range. Data rates of up to 1 GB/s are supported at a distance of up to 5 meters. The kit consists of two Li-Fi HotSpots, two CAT-6 cables (RJ45), two external power supplies and a user manual. Users can thus get to know the technical advantages of Li-Fi technology with little effort and test and evaluate them in their own network or environmental conditions.
-
product
Spring Testers
Imada offers manual or motorized spring testers in vertical or horizontal configurations.Lever-operated manual systems enable rapid compression and tension spring testing.Wheel-operated manual systems enable slower, more precise movement with the hand wheel.Motorized compression testers offer the most control and highest degree of repeatability with the ability to set a constant test speed and range of movement.All spring testers can be configured with a digital force gauge with data output for analysis by data acquisition software. An optional digital distance meter to measure displacement is available.
-
product
Stud Finders & Breaker Locators
Ultrasonic Distance Meter Laser Pointer measures from 2 feet up to 50 feetEasy-to-read LCD displayBuilt-in calculator for measuring areas and volumesAdds linear measurements, area and volumeMemory functionChoose from meter or foot unitsStud finder detects wood up to 3/4” with audio indicator & LCD displayAuto calibration stud detection
-
product
Ruggedized Laser Distance Meter with Compass
TRUPULSE 360R
F. W. Breithaupt & Sohn GmbH & Co.KG
*Scope magnification 7-times*Field of view 100m/915m distance*LCD Display*Range to non-reflecting targets 1.000m*Range to reflecting targets 2.000m*Accuracy in range ± 30cm (± 1m to weak targets; shown in display)*Accuracy in slope ± 0,25°*TruVector Compass Technology*Accuracy of compass ± 1° typical*RS 232/Serial interface (Model B: with Bluetooth)*IP protection IP56
-
product
Golf Rangefinder
Shenzhen UYIGAO Electronic Technology Co., Ltd
Handheld Digital Distance Meter Golf range finders hunting laser distance meter finder telescope
-
product
Laser Distance Meter with Compass
TRUPULSE 360(B)
F. W. Breithaupt & Sohn GmbH & Co.KG
*Scope magnification 7-times*Field of view 100m/915m distance*LCD Display*Range to non-reflecting targets 1.000m*Range to reflecting targets 2.000m*Accuracy in range ± 30cm (± 1m to weak targets; shown in display)*Accuracy in slope ± 0,25°*TruVector Compass Technology*Accuracy of compass ± 1° typical*RS 232/Serial interface (Model B: with Bluetooth)*IP protection IP54
-
product
260' Laser Distance Meter
2282-20
Milwaukee's Laser Distance Meter is a heavy duty distance measuring tool for professional, commercial and industrial applications. The 2282-20 can easily measure distance up to 260' with 1/16" accuracy. The simple user interface makes Laser Distance Meter easy to use. Smart Horizontal Mode provides the most accurate measurements by factoring in the angle the unit is being held. The end bracket allows for accurate measuring from corners and edges. Easily add and subtract values and use seven different functions to calculate length, area, volume, indirect measurements, stake out, timer and Smart Horizontal equations. The 2281-20 includes meter case, two (2) AAA batteries, quick reference guide, CD manual and is covered by the Milwaukee 5-Year Warranty.
-
product
Laser Distance Meter
*Measuring distance : 0.05 to 30m*LCD display : 2 rows*Accuracy : ±1.5mm (±0.06in)*Unit conversion : m / in / ft*Laser classification : class 2*Laser type : 635nm <1mW*Laser beam*Dynamic measurement*Area, volume measurement*Pythagorean proposition measurement*Indirect measurement*Add / Subtract calculation*Maximum / Minimum measurement
-
product
Near Field Probes
A typical emi emission test is performed using broadband EMC antennas such as biconical, log periodics, Combilogs and horns. These antennas usually placed at 1, 3 or 10 meter distance as required by the test specification. These is considered far field measurements and the emission limits are given for the specific distance by the specification. During EMI compliance measurements, the emissions levels from products are compared with these limits. If the product exceeds these limits it is considered failing. These tests are typically conducted in a open area test site IOATS) or inside an anechoic chamber.
-
product
Flexible Rope-Type Current Probe
RCT1A and RCT5A
These probes have great bandwidth ensuring accurate measurement even with harmonically distorted wave shapes. For all RCT1A/RCT models, a NIST, NAVLAP, NPL (UKAS) factory traceable calibration certificate and certificate of conformance is supplied. UL/CSA approved materials are used throughout. Three phase and single phase flexible AC current sensors (rope sensors) are available for fast installation in confined spaces, eliminating the need for Electrical Supply Shutdown. Available outputs are 1A @ 2.5VA and 5A @ 0.5VA, this means long cable lengths from current sensor to signal conditioner allow these low VA ratings to be used, even when feeder cable to energy meter distances are large (up to 98 feet / 30 meters)
-
product
Laser Range Finder
Shenzhen Noyafa Electronic CO.,LTD
For more than a decade Noyafa has been engaged in researching, developing, and producing high-quality, affordable laser distance meters & rangefinders. Its laser measurer products offer higher accuracy, better target acquisition and higher range resolution. Their capabilities go far beyond just measuring a range. You can instantly measure slope distance, inclination and azimuth and calculate horizontal and vertical distance - all with a single push of a button.
-
product
H/L Voltage Clamp Meters
High Voltage Current Transformation Ratio Tester breaks traditional structure, specially designed for high and low voltage first and secondary loop current, variable ratio, and current leakage test; apply the latest CT technology and mask digital integration technology, composed of special high-voltage clamp, low voltage clamp, host, high voltage insulation rod and monitoring software, etc; its wireless transmission test data can penetrate multiple building obstacles with a straight-line distance of 30 meters.
-
product
Basic Laser Distance Meter
TRUPULSE 200L
F. W. Breithaupt & Sohn GmbH & Co.KG
*Scope magnification 4-times*Field of view 131m/915m distance*LCD Display*Range to non-reflecting targets 1.750m*Range to reflecting targets 1.750m*Accuracy in range ± 1m*Accuracy in slope ± 0,5°*IP protection IP54
-
product
Laser Distance Meter
Shenzhen UYIGAO Electronic Technology Co., Ltd
Is the ideal device for a civil engineer, and any other large scale operations in which distance measurement accuracy is paramount.
-
product
200' Laser Distance Meter
2281-20
Milwaukee's Laser Distance Meter is a heavy duty distance measuring tool for professional, commercial and industrial applications. The 2281-20 can easily measure distance up to 200' with 1/16" accuracy. The simple user interface makes Laser Distance Meter easy to use. The end bracket allows for accurate measuring from corners and edges. Easily add and subtract values and use five different functions to calculate length, area, volume, indirect measurements, and stake out equations. The 2281-20 includes meter case, two (2) AAA batteries, quick reference guide, manual and is covered by the Milwaukee 5-Year Warranty.
-
product
Ion 700 Benchtop Meters
Oakton benchtop 700-series meters are designed for use in crowded laboratory settings. Compact footprint of less that 6" x 7" (16 x 18 cm) conserves valuable space, while the large, dual-display LCD provides excellent visibility—even from a distance. Ion 700 meter measures pH, mV, relative mV, ion concentration and temperature. Automatic temperature compensation (ATC) maintains reading accuracy even with fluctuating temperatures. Models feature five-point pH calibration with automatic buffer recognition for both USA (pH 1.68, 4.01, 7.00, 10.01, 12.45) and NIST (pH 1.68, 4.01, 6.86, 9.18, 12.45) pH buffers. Meters additionally feature ion concentration calibration of up to 5 points. Meter features include Auto-Hold, selectable °F or °C measurement, and easy recall of electrode slope or offset. The convenient pull-out quick reference card keeps procedures handy at all times. Use 700-series meters with any pH, ORP, or ISE electrodes with a BNC connector.
-
product
Laser Distance Meters
Sends a pulse of laser light to the target and measures the time it takes for the reflection to return
-
product
Laser Distance Meter M-LDM-50P
Laser Distance Meter M-LDM-50P
Fuzhou Metricu Technology Co Ltd
Laser Distance Meter
-
product
TCS Comfort
Maschinenbau Haldenwang GmbH & Co. KG.
Trip distance / tachograph meter integrated into the brake tester (only in conjunction with PC)Electronic control unit TCS shockproof (workshop-oriented) aluminum housing with connection D-Sub 25p / D-Sub 9pEntire operation via integrated time and data display, and your existing PC (OS: Windows).Complete measurement and programming of the tachograph types 1311, 1314, 1318, 8400, FTCO 1319 MTCO 1324, TVI 2400, SE 5000, EFAs, SmarTach, DTCO 1381 incl. Integrated dial measurementLCD 4 rows, 16 digits; backlit with an integrated smart card readerMobile and / or stationary usable instrument; used stationary as integrated into the brake tester and the computer; optionally a road measurement is possible.Expression of complete test reportData storage for customer and vehicle datamultilingualism
-
product
Require External Wireless Module
Laser Distance Meter
One of the most advantages of "External Wireless Connectivity Laser Distance Meter" is wirelessly connect to Smart phone / Tablet / PC (require external modules) through free APPS. Measured distance can be displayed by graphic with previous reading recorded and most useful feature included is the measurement of distance / area / volume can be snapped through Smart phone with figure out / indication of the measured value as well as calculation of area with the required information, such as an area measured need to know the amount of paint or how many tiles or wall paper required for the project. According to these information, you may calculate estimate cost of the project to meet with your budget or to send to your client or office.
-
product
Handheld RH Meter
635-1
The Edgetech Instruments Model 635-1 is a robust and reliable measuring instrument with the protection class of IP54. The large back lit display allows the user to easily view the dew point, RH and temperature readings. The 635 offers both standard plug-in probes and optional wireless probes that can measure up to a distance of 20 meters. A maximum of 3 wireless probes can be used at one time and can be retrofitted with the 635 at anytime. All probes are equipped with a patented humidity sensor offering long term reliability and guaranteed accuracy based on results from worldwide laboratory tests. The 635 is equipped with a secured carrying strap for safe transporting and has heavy duty magnets on the back to ensure secure attachment at the measuring location.
-
product
Ultrasonic Finder Distance Meter
Instant and accurate distance and acreage measurement by ultrasonic waves, an ideal tool for architects and layout designers.
-
product
Professional Laser Distance Meter
VAH40 VAH100
Shanghai Yi Hua V&A Instrument Co., Ltd. CO.,LTD
Professional 100m laser distance meter for ourdoor .Accurate and reponse fast, easy to use.
