Product

Static & Lighting Chokes

-

LBA Group, Inc

LBA Group, Inc

Lighting chokes are used to pass tower lighting voltages across the base insulator of a series-fed tower without appreciably altering the tower impedance. LBA TC-300 general purpose tower lighting chokes are provided for three wire 110/220 VAC circuits. Maximum current is 25 amps. These chokes are rated for peak base voltages to 10,000 volts, and present a typical reactance of +j5000 ohms at 530 kHz. Bypass capacitors are provided on each winding.

Product

Fiber Optic Light Source

-

Fiberstore

Fiberstore

Fiber Optic Light Source.

Product

PCIe Clocks: Time Signal Receiver For The PCI Express Bus

-

Meinberg Funkuhren GmbH & Co. KG

Meinberg Funkuhren GmbH & Co. KG

Although the PCI Express bus is software-compatible with other PCI implementations, the hardware of these PCIe plug-in cards is based on a different concept.Fewer lines are used for data transmission than, for example, with PCI plug-in cards - a high transmission rate is achieved by using a fast serial protocol.

Product

Safety Light Curtain Type 2

SF2B Ver.2

-

Panasonic Industrial Devices Sales Company of America

SF2B Ver.2 - Panasonic Industrial Devices Sales Company of America

SF2B - Type 2 Safety Solution. The SF2B Series complies with international safety regulations at a reasonable cost.

Product

Light Measurement Sensors

-

Gamma Scientific Inc.

Gamma Scientific Inc.

Gamma Scientific offers a catalog of professional light intensity measurement devices for photometric and radiometric applications. These devices are typically utilized by laboratories, OEM’s, value-added resellers and other groups seeking to accurately measure light intensity and brightness. Browse our light intensity measurement device catalogs to find the right photometry or radiometry solution today.

Product

Light Sources

-

Excelitas Technologies Corp.

Excelitas Technologies Corp.

Excelitas offers an array of illumination and lighting technologies with custom design capabilities aligned with customer requirements to deliver an illumination solution optimized to your specifications. From simply supplying a discrete LED, Laser, Lamp or UVC source to providing a complete, integrated system, Excelitas consistently delivers lighting solutions for the most demanding applications.

Product

Light Dependant Resistance Measurement Trainer

-

Unitech Scales And Measurements Pvt. Ltd

Unitech Scales And Measurements Pvt. Ltd

L.D.R. Trainer comprises of light dependent resistor (LDR) fitted to the shaft, which moves inside the tube where lamp is fitted at the other end. Variable DC voltage source is provided to vary the light intensity. Digital indicator is supplied to measure the light intensity in terms of distance moved between LDR and light source.

Product

[5kV AC] Hipot Tester, Rise/Fall-Time Control Function Equipped

TOS5200

-

Kikusui Electronics Corp.

TOS5200 - Kikusui Electronics Corp.

TOS5200 is designed for AC Hipot Test with 500 VA capacity and 200 mA short circuit current output capability. Equipped with the PWM amplifier, the TOS5200 can provide a stable & reliable output without being affected by ACpower line. Therefore, it is a perfect solution for electronic equipment or devices complied to IEC, EN, UL, VDE andJIS etc. requirement.As TOS5200 covers most of features of our upper class model for AC Hipot Test, it achieves thesuperb cost / performance ratio for those who need 200 VA or 500 VA capacity, or both. Also, as it equips the Interlockfunction together with other safety features, operator can carry out the test with higher current value in safe.

Product

Spectral Light And Color Meter w/ Flicker measurement

BTS256-EF

-

Gigahertz-Optik GmbH

BTS256-EF - Gigahertz-Optik GmbH

Spectroradiometer for the illuminance (photopic, scotopic, melanopic), spectrum, light color, color rendering index, and flicker. Cosine field of view illuminance measurement for accurate evaluation of extended illumination. Flicker measurement. Spectral measurement technology, required for LED light, color, color rendering, color effects. Photodiode for synchronization to pulse width modulated light and flicker measurement.

Product

Optical Light Sources

-

Kingfisher International

Kingfisher International

A fiber optic source is commonly used with a meter to measure optical fiber attenuation or insertion loss.

Product

IRIG Time Code Receiver for Computers (PCI Express)

TCR180PEX-EL

-

Meinberg Funkuhren GmbH & Co. KG

TCR180PEX-EL - Meinberg Funkuhren GmbH & Co. KG

The TCR180PEX-EL receives IRIG-A/B/G, IEEE 1344, IEEE C37.118 or AFNOR NF S87-500 time codes and can be used for synchronizing the system time of its host PC. The IRIG output of this card can generate an IRIG signal for other IRIG time code readers. It is used in applications like data acquisition, standalone computer time synchronization (for systems without a network connection or higher accuracy requirements).

Product

CT5 TIME TO GO Battery Charger

40-255

-

CTEK Power USA

40-255 - CTEK Power USA

The groundbreaking CT5 TIME TO GO (part #40-255) battery charger and maintainer is a world first because it answers the question ‘When will my battery be fully charged?’This means you can plan your day around your battery charging because the CT5 TIME TO GO gives you an accurate prediction of the remaining charging time in hours. Not only that, it’ll also tell you when you can safely try to start your vehicle before the battery is fully charged. The CT5 TIME TO GO uses advanced technology to give you three charging and maintenance programs – Normal, AGM and Recond. It’s easy to use and fully automatic, so it can be connected directly to the battery indefinitely, if required, and it won’t over or under charge. The CT5 also has built-in temperature sensing capabilities.

Product

SLD Light Source

-

FiberLabs Inc.

FiberLabs Inc.

The SLD light source is a light source to emit low-coherence light with a broad spectrum like LED and high brightness like LD. Light emitted from a narrow active layer like LD effectively couple to the fiber. SLD light source can be used for optical measurements and sensors, including fiber optic gyroscopes and OCT. FiberLabs provides fiber-output SLD light sources in different wavelength bands from visible to near-infrared light. Our lineup includes bench-top types convenient for experiments and easy-to-integrate module types.

Product

Services- Global Server Time

ZETSERVER

-

ZETLAB Company

ZETSERVER - ZETLAB Company

The software is used for displaying the time after the ADC, spectrum analyzer or measuring instrument connected to the computer is started.

Product

Light Sheet Microscopes

-

Carl Zeiss AG

Carl Zeiss AG

Life science research can place high demands on your imaging capabilities: Sometimes you need to image whole living model organisms, tissues and cells as they develop. Or you may want to observe subcellular dynamics in living samples over hours and even days. Light sheet fluorescence microscopy (LSFM) with its unique illumination principle is ideal for fast and gentle imaging of such specimens.

Product

Light / Lux Meter, 50000 lx, 100 lx, 4 %, 185 mm, 78 mm, 38 mm

72-7250

-

Tenma

72-7250 - Tenma

The 72-7250 is a Digital Light Meter with RS-232 capability. It features super large LCD display with contrast adjustment for best viewing angle. Records maximum, minimum and average readings. Wide range measurement both for LUX and foot candle units. User selectable lighting type (tungsten, fluorescent, sodium or mercury).

Product

Time Shift Test Java Applications w/in a WebLogic Managed Server

Time Machine Framework for WebLogic

-

SolutionSoft Systems Inc.

Time Machine Framework for WebLogic - SolutionSoft Systems Inc.

The Time Machine Framework for WebLogic provides a great set of features enabling time shift testing scenarios for Java applications deployed to Oracle WebLogic. This Framework enables customers to use Time Machine functionality to time shift test Java applications within a WebLogic managed server without the need to create a separate instance of the application server for testing other time related activities. The Framework allows customers to configure and automatically create different virtual clocks on managed servers within the WebLogic domain as well as the granularity to establish virtual clock rules for specific applications deployed to the managed server.

Product

Time Domain Reflectometer

TDR-420

-

Sonel S.A.

TDR-420 - Sonel S.A.

TDR-420 is a hand held Time Domain Reflectometer designed to identify and locate faults in power, telecommunications and teletechnical cables. TDR-420 reflectometer allows to measure the length of the cable and determine the distance to damage or impedance variation in the range of 4 m to 6000 m in conductors with metal wires. The shortest measuring range of 7 meters and a dead zone of 0.6 meters allows to locate damages at a very close distance from the place where the device is connected.

Product

Time Code Reshaper/ Distributor

SR-28

-

Brainstorm Electronics Inc.

SR-28 - Brainstorm Electronics Inc.

The SR-28 can drive time code over long cables, making it ideal for synchronization during live shows and remote recording. The SR-28 time code distributor, with two inputs and eight outputs, reshapes time code while distributing it, eliminating amplitude distortions and level fluctuations. The level of each output is individually adjustable via front panel pots. The input is selected via a front panel switch. Also included are 2 power inputs and an automatic switch over in case of failure.

Product

IRIG Time Code Receiver & Generator Module

TCR180

-

Meinberg Funkuhren GmbH & Co. KG

TCR180 - Meinberg Funkuhren GmbH & Co. KG

The module TCR180 has been designed to receive and to generate IRIG-A/B/G, IEEE 1344, IEEE C37.118 or AFNOR NF S87-500 time codes. It is used in applications like data acquisition, standalone computer time synchronization (for systems without a network connection or higher accuracy requirements) or as an IRIG converter device. The frequency locking of the master oscillator to the time code system enables this module to generate fixed and programmable standard frequencies with high accuracy and stability. Various oscillator options allow the cost efficient implementation of different requirements concerning the accurracy of the outputs. The generator of the IMS-TCR module generates pulses per second and per minute and per hour. Four programmable outputs are also available. The pulses are synchronized to UTC-second.

Product

Time & Frequency Distribution Amplifiers

-

Brandywine Communications

Brandywine Communications

Brandywine offers a wide range of high quality, state of the art signal timing distribution amplifiers, all with very low phase noise. These precision timing signal distribution amplifiers offer a variety of time and frequency signals and interface formats including IRIG A, IRIG B, Have Quick, 1PPS, as well as low phase noise reference frequencies. All of our distribution amplifiers feature dual inputs with automatic failover and multiple independently buffered outputs.

Product

Intelligent Time Reference

TM-4™and TM-4/OEM™

-

Spectrum Instruments, Inc.

TM-4™and TM-4/OEM™ - Spectrum Instruments, Inc.

The Intelligent Reference/TM-4™ and TM4/OEM™ are multi- purpose, GPS disciplined timing signal generators and frequency references in economical off-the-shelf and custom configurations. Intended for use in a wide variety of timing, synchronization and frequency reference applications, they are based on the most advanced architecture Spectrum has ever offered, and include the most popular features of Spectrum's core platform for current timing products.