Product

aeroPULSE Ultrafast Fiber Lasers

-

NKT Photonics A/S

NKT Photonics A/S

aeroPULSE is our ultrafast fiber laser platform. Robust, industrial, and available in both pico- and femtosecond flavors.

Product

Ytterbium-doped Fiber Amplifier

YDFA

-

Amonics Ltd.

YDFA - Amonics Ltd.

Ytterbium-doped Fiber Amplifier (YDFA) is another Amonics specialised product line. Like our highly recognized optical amplifiers, the YDFA offers high output power and high gain with exceptional reliability. ideal for high power YDFA applications. The turnkey microprocessor controlled benchtop YDFAs manage alarms and status indicators. An integrated RS232 or Ethernet computer interface enables easy control, diagnostic functions and data acquisition. Available options include single frequency operation, linearly polarized operation.

Product

FiberScout | Fault Identifier & Singlemode Fibre Length Tester

TS21

-

Yamasaki Optical Technology

TS21 - Yamasaki Optical Technology

The TS21 Fiber Scout was designed and developed by Yamasaki as a cost effective and simple solution for identifying faults and testing the length of singlemode fibers. This lightweight, rugged, dustproof and water resistant piece of test equipment can list up to 8 results at one time and has three brilliant functions.

Product

4 Way Fiber Optic Return Path Receiver (low Optical Input)

MX4RR-LI

-

Maxcom Inc.

MX4RR-LI - Maxcom Inc.

The MX4RR-LI transforms return optical signals to RF signal output. The standard 1U chassis integrates 4 independent receiver modules, it can receive up to 128 return optical signals from burst mode mini-nodes or services for 128 RFoG optical network units (ONU)-Mini-Nodes.

Product

Mini Fiber Optical Switch at Single Mode Latching 1310/1550nm 5V with LC/PC Connector

SUN-FSW-1x4

-

Guilin GLsun Science and Tech Group Co., LTD

SUN-FSW-1x4 - Guilin GLsun Science and Tech Group Co., LTD

GLsun 1*4 Optical Switch micaro optical switch informationFeatures•Low Insertion Loss•Wide Wavelength Range•Low Crosstalk•High Stability,High Reliability•Epoxy-free onOptical Path•Latching and Non-latchingApplications•F&D in Laboratory•System Monintoring•OADM•MAN(Metropolitan Area Network)•Network Security and MonitoringSpecificationsParametersUnitSUN-FSW-1×4Wavelength Rangenm850±40 / 1300±401260 ~ 1650Test Wavelengthnm850 / 13001310 / 1550Insertion Loss 1, 2dB≤1.0Return Loss 1, 2dBMM ≥ 30 SM ≥ 50Crosstalk 1dB≥ 55PDLdBSM ≤0.1WDLdB≤0.25RepeatabilitydB≤±0.02Operating VoltageV3.0 or 5.0Voltage Pluse Width(Latching)ms≥ 20DurabilityCycles≥ 10 MillionSwitching Timems≤8Optical PowermW≤500Operating Temperature℃0 ~ +70Storage Temperature℃-40 ~ +85Relative Humidity%5 ~ 95Dimensionmm(L)33.5×(W)25.5×(H)9.5 ±0.2Note: 1 Within operating temperature and SOP.2 Excluding connectors.GLSUN 1x4 fiber optic switch micaro optical switch

Product

Fiber Optic Components For Optoelectronic Packaging

-

OZ Optics

OZ Optics

OZ Optics offers a wide range of standard and custom fiber optic components for optoelectronic packaging. Components include collimators, focusers, patchcords, connectors, and metalized fiber. The low backreflection collimators and focusers are available for a wide range of industry-standard connectors and wavelengths. The hermetically sealable patchcords, with glass or metal solder, and metalized fiber meet high Telcordia standards. The polarization maintaining patchcords and connectors use our specially designed ferrules that minimize insertion loss, backlash, and rotational errors.

Product

Dispersion Compensation Optical Fiber Module

DCM-G.655-C-Fxx

-

Hangzhou Huatai Optic Tech. Co., Ltd.

DCM-G.655-C-Fxx - Hangzhou Huatai Optic Tech. Co., Ltd.

Huatai DCM-G.655-C-Fxx dispersion compensation fiber module is designed for single mode optical fiber G.655 C band, dispersion and dispersion slope compensation for wide band, the system optimized residual dispersion. The PCVD module based on optical fiber technology is mature and reliable, can improve the performance of optical transmission system.

Product

Fiber Stiffness Tester

DRK023A

-

Shandong Drick Instruments Co., Ltd.

DRK023A - Shandong Drick Instruments Co., Ltd.

Used to determine the bending properties of various fibers.

Product

Fiber Optic Light Source

-

Huihong Fiber Inc

Huihong Fiber Inc

Fiber optic light source is a fiber optic test equipment to measure the fiber optic loss for both single mode fiber cable and multimode fiber cables; usually the fiber optic light source is used with the fiber optic power meters. This fiber optical light source can provide wavelength output according to the specific requirements including the 650nm red source, 1310nm/1550nm wavelength for the single mode fiber and 850nm/1300nm wavelength for the multimode fiber. Used together with our fiber optic power meter, they act as an economic and efficient solution for the fiber optic network works.

Product

Omega Fiber Optic Connector

-

Teledyne Marine Impulse-PDM

Teledyne Marine Impulse-PDM

Teledyne lmpulse-PDM's Omega Series offers any combination of multi-mode or single-mode optical ways and 16 AWG electrical ways from a single way through to seven ways. Electrical pins are part of the CCP and the mating sockets are part of the FCR, CCR or BCR. Connectors populated with both electrical and optical ways will be populated in a standard Teledyne lmpulse-PDM format to facilitate interchangeability between batches. This information can be provided at the time of quotation.

Product

Wireless Fiber Inspection Probe - WIS 300

-

Shanghai Fibretool Technology Co.,Ltd.

Shanghai Fibretool Technology Co.,Ltd.

WIS 300 wireless fiber inspection scope is a WIFI/USB dual-use portable digital fiber inspector. With automated PASS/FAIL and fast images focus functionality, and easy pairing to Android™ and Apple© iOS devices, It can quickly check various patch cords and transceivers, display the fiber end face in PC/laptop/ OTDR/Smartphone etc..digital devices with the USB cable or WiFi connection. Under WiFi mode, it can automatically get the image checked and analyzed. Test results can do the pass/fail judges with IEC/IPC criteria. Fiber images and results can be saved on PC and mobile devices in jpg/pdf/excel format for file records. It’s super light and handy to take anywhere anytime for field tests, operation inspections, and lab research.

Product

Fiber Optics

GEN II FOB

-

DG Technologies

GEN II FOB - DG Technologies

Fiber Optic converters Electrically isolate signals from the vehicle bus using common bridge and satellite modules interconnected with fiber optic cable for EMI and EMC testing.

Product

Plastical Optical Fiber

POF

-

Radiantech, Inc.

POF - Radiantech, Inc.

POF (Plastic Optical Fiber) is a new, convenient, effective, and economical method to construct optical networks at small office or home. A visible red light of 650 nm is utilized in this application so users can easily see the light at the cutting edge of the POF. Major application here is 100Mbps Fast Ethernet over POF implemented by distinct media converter or switches.

Product

OEM 1-Channel Fiber Optic Signal Conditioner PCB Module

FOTEMP1-OEM-MNT

-

Micronor Sensors

FOTEMP1-OEM-MNT - Micronor Sensors

The FOTEMP1-OEM-MNT is a small form factor PCB interface module designed for low cost insertion of high precision GaAs-based fiber optic temperature sensor technology into OEM applications where common electrical temperature sensors and thermocouples cannot be used. The OEM interface product is compatible with all TS series fiber optic temperature probes. The sensors are entirely non-metallic and electrically passive, providing immunity to EMI, RFI, MR, microwaves and radiation is required.