Product

Temperature & Humidity Transmitter

HTO

-

Adtek

HTO - Adtek

- CO2 measuring element: NDIR Sensor 2- CO measuring element: Electrochemical sensor- Temperature/Humidity sensing element : CMOS sensor- Analog output option:4~20mA or 0~10V- Communication output option:RS485 Modbus RTU- Configured by PC with free software via USB cable (option)- Present value offset adjustable- Inside buttons for adjust output parameters- LCD backlight color to Indicated CO/CO concentration 2- Temperature measuring range can be -50~100℃ via USB console port to setting

Product

Automatic Calibration Module

ACM2509

-

Copper Mountain Technologies

ACM2509 - Copper Mountain Technologies

ACM2509 is an automatic calibration module that can be used with all CMT Vector Network Analyzers operating in frequency range up to 9 GHz. It is a fully automatic USB-controlled and powered electronic calibration module. Minimizing the number of steps required by technicians reduces the risk of human error and expedites the calibration process. Automating the calibration routine also reduces wear and tear on the analyzer and RF cables. To perform full two-port calibration, each end of the ACM need only be connected to the analyzer once, as opposed to seven connections with a traditional calibration. The ACM also contains a factory characterized 20dB in-line attenuator which acts as a simulated device under test (DUT). The confidence check feature loads the factory stored DUT into memory so proper calibration can be verified.

Product

Adapter/Stainless Steel

WADP-24F24F

-

Warison Technology inc

WADP-24F24F - Warison Technology inc

Warison provides wide range of wireless passive coaxial components, includes Adapters, Attenuators, Coaxial Cables Assemblies, DC Blocks, Filters, Isolators & Circulators, Probes & Terminations. With outstanding capability of development and design, Warison is able to custom the spec based on customer��s demand. All Warison��s products pass inspection and electronic performance test before shipping out. It is our principal to deliver the best solution to all our clients.

Product

Lan Cable Tester

-

Shanghai Beha Electronics Co., Ltd.

Shanghai Beha Electronics Co., Ltd.

Is a newly designed tool,that can easily test the correct pin configuration of the RJ45/RJ11 modular cables, 10/100 base-T cable and Token Ring cable etc., By comparing one transmitting end and the corresponding receiving end, the 9185B Lan cable tester also can test installed cable far away by using the remote receiving unit., Provides the variety for wiring check, such as cable continuity, open status, short status and miss wired.

Product

Partial Discharge and Tan Delta

PDIX Series

-

High Voltage Inc.

PDIX Series - High Voltage Inc.

PDIX is a combined partial discharge and tan delta cable diagnostic testing system. By combining HVI’s VLF products with PDIX products, users can perform VLF AC withstand, partial discharge detection, and tan delta measurement on medium and high voltage cables, rotating machinery, and other apparatus with one integrated package fully supported by HVI & PDIX.

Product

Software Package

System Software 3

-

BAUR

System Software 3 - BAUR

The BAUR system software is a cable testing, cable diagnostics and cable fault location package. It enables efficient monitoring of the condition of cable networks in combination with BAUR cable fault location, testing and diagnostics systems.

Product

Rugged Ethernet System Supporting up to Four Independent 8000 Family Avionics Communication Modules

ES-9810/xx

-

Excalibur Systems, Inc.

ES-9810/xx - Excalibur Systems, Inc.

The ES-9810/xx is a rugged ethernet system supporting up to four independent 8000 family avionics communication modules, allowing multiple different protocols to be mixed and matched in a single system. Modules available include MIL-STD-1553, MIL-STD-1760, MMSI, ARINC-429, ARINC-708, ARINC-717, Serial, Discrete and CAN bus.The ES-9810/xx is supplied with C drivers, including source code. Mating connectors and cable adapters for I/O connection can be purchased seperately.

Product

9025 VXI - 25 Module Solution for VXI

-

Virginia Panel Corporation

Virginia Panel Corporation

The 9025 VXI Receiver is a 25-module solution designed for use with VPC pre-wired interconnect adapters, but can also accommodate a combination of pre-wired interconnect adapters and discrete-wired modules using retainer blocks.1-4 modules attach to an interconnect adapter which in turn is attached to the VXI card. This connector “funnel” forms a complete VXI module, which is easily inserted or removed from the VXI mainframe for maximum flexibility in testing applications. The interconnect adapter also provides room for driver sensors. External cabling to the card is done with a cable clamp or connector located on the top or bottom of the adapter. The positioning of funnels and use of discrete wiring modules can affect the performance of the product. Please contact us for technical assistance.

Product

20 Pin Scorpion™ Cables - Connector to Connector for Pickering Products

-

Pickering Interfaces Inc.

Pickering Interfaces Inc.

The connector to connector cable assemblies below are suitable to use with Pickering cards and modules that utilize a 20-pin Scorpion connector.

Product

DVB / MPEG Stream Analyzer program

dvbsnoop

-

DVB Project

dvbsnoop - DVB Project

dvbsnoop is a DVB / MPEG stream analyzer program, which enables you to watch (live) stream information in human readable form. Its purpose is to debug, dump or view digital stream information (e.g. digital television broadcasts) send via satellite, cable or terrestrial. Streams can be SI, PES or TS. Basically you can describe dvbsnoop as a "swiss army knife" analyzing program for DVB, MHP, DSM-CC or MPEG

Product

Power modules

-

G.R.A.S. Sound & Vibration A/S

G.R.A.S. Sound & Vibration A/S

It provides polarization voltage for the transducer, ensuring that the microphone gets the charging voltage it needs.It provides supply voltage for the microphone preamplifier. The preamplifier acts as a unity gain impedance converter. It provides a certain amount of line drive capability by providing a low output impedance and output current, making it possible to transmit the signal from the transducer to the Power Module without significant degradation.A power module can provide amplification or attenuation to the signal, thus making it possible to fine tune the measurement chain to the signals being measured and the hardware being used.Selectable filters make it possible to exclude unwanted noise from the measurement, e.g. wind induced noise from outdoor measurements.Overload detection makes it possible to validate the measurements and is a useful tool in monitoring setups.When a Power Module with gain is used, you can use longer cables because of the power module's ability to deliver current.A Power module introduces electrical isolation

Product

Wire Tracer

LKZ-700

-

Sonel S.A.

LKZ-700 - Sonel S.A.

Wire tracer LKZ-700 is designed for detecting of cables and conductors in various environments (concrete, brick, wood, ground) being under voltege, without the need to disconnect any devices from tested network, as well as in non-voltage environments.

Product

Clamp type AC Current Sensor／for Load Current Measurements(CT Series)

CT-3000

-

MULTI MEASURING INSTRUMENTS Co., Ltd.

CT-3000 - MULTI MEASURING INSTRUMENTS Co., Ltd.

*Ultra big CT window*AC 1A～3000A*Current measurements of main cable

Product

Threaded Load Button

2000 Series

-

HITEC Sensor Solutions Inc.

2000 Series - HITEC Sensor Solutions Inc.

This model is a threaded load button for tension and compression load measurements up to 5000kg/ 10000lb. Fully welded cover (for SS load buttons), amplified and digitised versions are available on request. We can also customise this sensor for other thread sizes and cable sizes

Product

Adapter/Stainless Steel

WADP-SFSF-01

-

Warison Technology inc

WADP-SFSF-01 - Warison Technology inc

Warison provides wide range of wireless passive coaxial components, includes Adapters, Attenuators, Coaxial Cables Assemblies, DC Blocks, Filters, Isolators & Circulators, Probes & Terminations. With outstanding capability of development and design, Warison is able to custom the spec based on customer��s demand. All Warison��s products pass inspection and electronic performance test before shipping out. It is our principal to deliver the best solution to all our clients.

Product

CO2 Concentration Transmitter

H5021

-

COMET SYSTEM, s.r.o.

H5021 - COMET SYSTEM, s.r.o.

The device is supplied with CO2 probe with 1m cable. Cable lengths 2, 4 or 10 meters available optionally.