Mass Flow Meters
measure's the amount of matter passing through at a given time.
-
Product
Flow Sensors
-
SICK provides innovative sensor solutions for flow measurement technology which combine flexible measuring methods and rugged equipment design with cost-efficient connection concepts to integrate higher-level systems. Whether you need to detect the current flow rate value using analog values or find the quantity using pulse detection – SICKs flow sensors are always reliable and safe and can work with a wide range of media under difficult process and ambient conditions.
-
Product
Inductively Coupled Plasma Mass Spectrometer
ICPMS-2030
-
With its newly developed collision cell and optimized internal structure, the ICPMS-2030 provides superior sensitivity. At the same time, thanks to the adoption of its proprietary mini-torch unit and provision of an Eco mode, the quantity of argon gas needed for analyses has been greatly reduced to the industry's lowest levels. As a result, low running costs are assured. The Development Assistant function of the software automatically sets the optimal analysis conditions for quantitative analysis. Then, after measurements are complete, the Diagnosis Assistant function automatically checks the validity of the necessary data. While reducing the burden on the user, the efficiency of analyses is enhanced and the reliability of the data can be increased. It complies with FDA 21 CFR Part 11.
-
Product
Flow Controllers
-
Parker is the industry-leading supplier when it comes to mass flow controllers. These flow controllers are known for their exceptional accuracy and repeatability, with a broad selection of flow ranges available. They also function under high operating pressures and temperatures. Our line of mass flow controllers includes models suitable for a variety of systems and are suitable for a wide range of applications across many of today's major industrial markets, including those that operate within extreme environments.
-
Product
Gas Chromatograph Mass Spectrometer
GCMS-QP2020 NX
-
The Shimadzu single quadrupole GCMS-QP2020 NX gas chromatograph-mass spectrometer (GC-MS) not only boasts the best performance in its class, but also the highest efficiency. This new high-end single-quad GCMS excels in both ease-of-use and robustness. The role of high-performance analytical instruments is expanding in areas as diverse as environmental pollution monitoring, forensics and material science. Whatever your field, the efficient and reliable GCMS-QP2020 NX is tailored to meet the needs of your laboratory.
-
Product
P-Series Single Channel Power Meter
N1911A
Power Meter
30 MHz video bandwidth Single shot real time capture at 100 M sample/s per second Key Measurements: - peak, average, peak-to-average ratio, rise time, fall time and pulse width22 Predefined formats: WiMAX, DME, HSDPA, etc. One screen view for pulse measurement analysis: Auto Scale, Auto Gate, Rise/Fall Time, Duty Cycle, etc. Internal Zeroing and Calibration while connecting to the DUT Bench Vue software enabled
-
Product
Meter
TruFlow™
-
TruFlow meters help improve production efficiency and product quality by enabling simple, cost-effective material flow measurement. This is a crucial first step in the OptiBond™ variation management process of measure, understand and improve material delivery and dispensing.
-
Product
Triple Quadrupole Mass Spectrometry
Xevo TQ-XS
-
Demands on analytical laboratories are changing and every laboratory needs to ensure it can keep pace with these changes. The Xevo® TQ-XS offers: *StepWave XS™ ion guide that provides increased sensitivity for challenging compounds. *Enhanced detection system with six orders of linear dynamic range to ensure sensitivity is accessible. *Tool-free probe design reduces the time taken for any routine maintenance and provides improved reproducibility between users.
-
Product
GCxGC Time-of-Flight Mass Spectrometer
PEGASUS® BT 4D
-
The Pegasus BT 4D offers enhanced sensitivity by coupling our benchtop Pegasus BT with our high performance GCxGC thermal modulation system. This combination gives the Pegasus BT 4D the ability to interrogate challenging samples where the best sensitivity is needed. Unique and powerful software and hardware features simplify quantitation, while also dramatically making GCxGC easy to use and understand.
-
Product
Mass Spectrometers
-
Our wide range of powerful, versatile, and proven mass spectrometry-based solutions deliver a new level of understanding and control in vacuum and gas-related applications to customers.
-
Product
Metal Magmeter Flow Sensor
2552
-
The Signet 2552 Metal Magmeter features all-stainless steel construction. The PVDF nosepiece and FPM O-rings are the only other wetted materials. The 2552 installs quickly into standard ISO 7-R 1 or ISO 7-R 1 (1 in. to 1 in. NPT) pipe outlets, and is adjustable to fit pipes from DN50 to DN2550 (2 to 102 in.). Two sensor lengths allow maximum flexibility to accommodate a variety of hardware configurations, including ball valves for hot-tap installations.
-
Product
Quadrupole Time-of-Flight Mass Spectrometry
Xevo G2-XS QTof
-
For the scientist who needs to identify, quantify and confirm the broadest range of compounds in the most complex and challenging samples. *Maximum robustness with no compromise in performance *Class-leading real-world quantitative sensitivity *Highest quality, most comprehensive qualitative information *Flexibility to adapt to changing needs *Accessible to experts and non-experts alike
-
Product
Flow Sensor
-
These types of devices are going to be able to measure the flow rate, often for a fluid. These sensors are usually a part of a flow meter, which will be able to record the flow rate. Today, many different types of flow sensors are available. It is possible to find air flow sensors as well, which can sense and determine the velocity of air movement.
-
-
Product
AC Fuel Flow Signal Generator
TA-100
-
The TA-100 signal generator was designed to facilitate testing of aircraft fuel flow indicators that require two input signals designated as “Drum” and “Impeller”. This generator provides both signals so as to provide a direct interface to the fuel flow indicator under test. The generator also provides switched power out to the unit under test as well as a 5v source for testing the bezel lighting. The original design was built around the requirements for the AMETEK series indicators (pn: 10171 series). This generator simulates a reference and a time delayed signal of appropriate amplitude for an indication of up to 1200pph for the indicator under test. The “PPH Select” switch provides fixed signal delays representing 0, 200, 400, 800, 1000 and 1200pph flow rates respectively, this provides the mechanic with an expedient check of the indicators accuracy. The “PPH Adjust” control allows the mechanic to vary the signal delay throughout the full range and serves as a good method for checking of pointer smoothness from stop to stop. The unit’s front panel also provides test jacks to monitor the “FDR Output” as well as the drum and impeller signals. The TA-100 requires only 28Vdc to operate. This generator provides a very economical approach to any repair facility or flight department as it becomes an alternative to purchasing two bench top signal generators. The TA-100 generator at the very least can provide a simple functional test and eliminate the high cost of exchanging an indicator as a function of troubleshooting the aircraft system.
-
Product
Lake Variable Area Flow Meters
-
Lake Variable Area flow meters, often referred to as rotameters, measure flow rate of a liquid or gas by relating linear displacement of an internal “float” or sharp-edged orifice plate (Lake) to a corresponding flow rate. As flow rate increases, the orifice area that the flow moves through also increases – thus, the term “Variable Area.” Variable Area meters either allow flow through a peripheral orifice formed between a tapered wall and a float as in the traditional rotameter, or an annular orifice and an internal tapered metering pin in the Lake Monitor.
-
Product
Flow Through Fittings
-
In-line or bypass housings designed to securely hold, protect, and position analytical sensors (pH, ORP, conductivity, oxygen) directly within a fluid process stream.
-
Product
QC Reporter™: Mass Confirmation And Quality Assessment
QC Reporter
-
QC Reporter™: mass confirmation and quality assessment with confidence Within a given manufacturing process, quality control (QC) plays a fundamental role in guaranteeing the supply of a high quality product. QC Reporter is an automated analysis and reporting software solution for QC environments. Compatible with the MALDI-8020 benchtop linear MALDI-TOF mass spectrometer, this software provides a simple and secure platform for typical QC workflows.
-
Product
Constant Flow Pump
Supercritical 24
-
The Supercritical 24 Constant Flow Pump is designed to be a reliable component wherever a constant flow must be maintained. The flow rate of the Supercritical 24 pump fitted with two standard 12 mL pump heads can be set in 0.01 mL/min increments from 0.00 to 24.0 mL/min.The Supercritical 24 Constant Pressure pump is designed to be a reliable component wherever a constant pressure must be maintained. Pressure can be set in 10-psi increments from 0 to 10,000 psi.
-
Product
MALDI-TOF & TOF/TOF mass spectrometers
-
Bruker''s FLEX series is a market leading technology platform - well-known for outstanding performance, reliability, convenience and innovative design. Its gold standard in Protein Sequence, MALDI Imaging and Polymer Analysis offer a wide range of capabilities matching any laboratory''s needs from expert users to beginners.
-
Product
Milliohm Meters & Microhm Meters
-
Shanghai Beha Electronics Co., Ltd.
Makes measurements by passing a constant current through the device under test (generally a conductor, contact or low resistance) and measuring the voltage across it. It has visual LED checks for excessive; potential lead resistance (RP) and current lead resistance (RC). Should the instrument become too warm, the temperature sensor will shut down the current (ISCOFF).
-
Product
Bench-top Microreactor & Combined Mass Spectrometer System
CATLAB-PCS
-
The Hiden CATLAB is a bench-top microreactor and combined mass spectrometer system for rapid and reproducible catalyst characterisation and reaction studies. The modular benchtop system features an advanced fast-response low thermal mass 1000oC furnace, multistream gas flow control of up to eight integrated gas streams, together with the precision Hiden quadrupole gas analyser.
-
Product
Dual-Pump Continuous Flow Systems
-
Teledyne LABS SyriXus continuous-flow systems couple two pump modules to a single controller, and use an active or passive valve manifold to provide non-stop, continuous feed of almost any fluid. The controller refills one pump while the other is delivering, using special algorithms to equalize pressure and flow of both pumps. This allows virtually pulseless transition at pump switchover while maintaining accurate flow rate.Two different valve packages are available to accommodate all types of fluids and specific requirements of your experiment or process.
-
Product
Flow Computers & Remote Controllers
-
ABB is the expert in low power and high-accuracy control devices for the remote production and custody transfer of oil and gas, offering the X-F.A.C.T.O.R. in flow computing.Easy installation, minimal intervention, and years of experience with real-world applications have helped to build greater efficiency into every function of ABB flow computers, remote controllers & RTUs (remote terminal units).
-
Product
High Precision Fuel Flow Meter
-
This system measures fuel consumption of an engine operated in steady state with high accuracy.•0.02 to 90L/h and 4500:1 wide range measurement (H type)•Keep the temperature change of the circulation flow passage in the device within ±0.1℃ (variation per 1 minutes) to provide stable measurement.•Pipe arrangement which minimizes air bubbles that enter the system reduced the factor error causes.•Resolution has been improved by using an encoder with 1200P/R (Ten times of number of pulses to the existing model.)
-
Product
Flow Measurement
-
HighReach Measuring & Controlling System Co.,Ltd
Involves using flow meters that measure the flow rate of steam, liquid, or gas flowing through a pipe.
-
Product
X-Flow Mass Flow Controller
-
The Parker X-Flow™ is a simplified mass flow controller for your instrument, lab or process needs. Fast, Reliable and Repeatable performance designed for OEM, Laboratory, or Process flow control instrumentation
-
Product
Flow and Pressure Meters
477
-
Parker Conflow’s Code 477 is an in-line flowmeter that provides both flow and pressure measurement functions in one compact unit, allowing a diagnostic check on ITP systems on coal cutting machines.
-
Product
Flow Sensors
-
Accuracy±0.75% of full scale Measuring pipe size range DN 15 to DN 600(0.5 to 24 inch) Measuring flow rate range 0.15 to 8 M/s(0.5 to 26 Ft/s) Field-rangable supply voltage from DC 5 to 24 VS Field-rangable operting temperature from -20 to 90°C(-4 to 194°F) Protection class NEMA4(IP65) or NEMA6,6P(IP68) CE EMC certification
-
Product
On-board Volumetric Flow Detector
FP-4135
-
The FP-4135 On-Board Volumetric Flow Detector is the high-precision positive displacement flow detector to measure the fuel flow rate of liquids such as gasoline, light oil and kerosene combined with the Ono Sokki DF-2200 On-Board Flow Meter or the FM series Digital Flow meter.
-
Product
Pitot Tube Flow Meter
PTFM-1000V2
-
The Pitot Tube Flow Meter, PTFM-1000V2 is a standalone interface for measuring exhaust gas flow rate of combustion engines. The system uses the tried-and-tested pitot tube principle with high-frequency transducers to accurately measure highly pulsating exhaust flows with a sampling rate of 1kHz. This rapid capture rate ensures that any pulsations or exotic behaviour in an engine is measured, and the unique design of the PTFM pitot tube means reverse flows can be measured with the same guarantee of sensitivity. The interface can be run standalone with a laptop, or seamlessly integrated to run alongside an analyser system without adding any more steps to the test cycle process.
