Product

4-in-1 OSLT Calibration Kit, DC to 70 GHz, Type-1.85 mm (f)

CK058F

-

Spanawave Corporation

CK058F - Spanawave Corporation

The Network Analyzer Calibration Kits with open, short, load, and thru (OSLT) provide the RF components needed to enable stable and accurate error correct measurements. Calibration of a network analyzer using Spanawave's Network Analyzer Calibration Kits allow for precise measurements. The Calibration Kits offer broad test equipment coverage for use with the 8003 Scalar Network Analyzer as well as being compatible with most network analyzers produced by other manufacturers. Spanawave calibration kits yield complete calibrations, as it takes into consideration the three major sources of systematic error correction by one port calibration at both ports.

Product

Incremental Length Gauges For Measuring Stations And Multi-gauging Fixtures

SPECTO series

-

Heidenhain Corp.

SPECTO series - Heidenhain Corp.

*High system accuracy: ±1 µm*Very rugged design*Compact design for limited installation space*Various plunger actuation possibilities*Highly durable ball-bearing guide*Measuring range of up to 30 mm*Interfaces: 1 VPP, TTL*Protection rating of up to IP67

Product

Calibration Kit

S2611

-

Copper Mountain Technologies

S2611 - Copper Mountain Technologies

*S2611 Calibration Kit, * Frequency Range: up to 26.5 GHz, * Impedance: 50 Ohm, * Connector type: 3.5 mm female.

Product

Digital Multimeter

KU-2600

-

Kaise Corporation

KU-2600 - Kaise Corporation

4000 count LCD 2 times / secAuto / Manual Ranging1.5V R6P or AA Batteries (x2)CATⅡ600V, CATⅢ 300V compliant155(H) x 75(W) x 29(D) mm,Approx. 180gHolster, 100-50 Test Leads, 1.5V R6P Batteries (x2 & spare),Spare Fuses F14 (0.5A/250V) (x1), Spare Fuses F17 (10A/250V) (x1),

Product

Microwave Leakage Detector

-

MEET International Ltd.

MEET International Ltd.

*Microwave leakage detection:≥ 1mw/cm2*Meter points to show "SAFETY" or "DANGER" zone*No battery required*Dimension (LxWxD) mm : 53x36x23*Packaging: Sliding blister card

Product

4-in-1 OSLT Calibration Kit, DC to 40 GHz, 2.92 mm (m)

CK562A

-

Spanawave Corporation

CK562A - Spanawave Corporation

The Network Analyzer Calibration Kits with open, short, load, and thru (OSLT) provide the RF components needed to enable stable and accurate error correct measurements. Calibration of a network analyzer using Spanawave's Network Analyzer Calibration Kits allow for precise measurements. The Calibration Kits offer broad test equipment coverage for use with the 8003 Scalar Network Analyzer as well as being compatible with most network analyzers produced by other manufacturers. Spanawave calibration kits yield complete calibrations, as it takes into consideration the three major sources of systematic error correction by one port calibration at both ports.

Product

USHIO Red Laser Diodes (633nm - 690nm)

-

The Optoelectronics Company Ltd

The Optoelectronics Company Ltd

Features: 5.6 mm CAN package, Optical output power: 80 mW (CW), 300 mW (pulsed – pulse width: 10 ns, duty: 10%), Lasing wavelength: 658 nm, Wall-plug efficiency*: 33%, Operating temperature: -10° – +60° C (CW); -10° – +75° C (pulsed), Single transverse mode, TE mode oscillation, MTTF >10,000 hours

Product

Classic Collet | Black | Without Line | Matt Or Glossy | Ø 28 Mm

020-5x20/5

-

ELMA Electronic, Inc.

020-5x20/5 - ELMA Electronic, Inc.

Secure plastic mounting cap for collet or wing knob

Product

01 With Pins For PCB | 6 Positions | M10

01-1xxx-20/70xx-6-N

-

ELMA Electronic, Inc.

01-1xxx-20/70xx-6-N - ELMA Electronic, Inc.

Multi wafer compact selector with 60° detent angle, 6 mm shaft diameter, 25'000 switching cycles and with up to 6 Ncm switching torque

Product

NI-9970, 2-Position, Spring Terminal Connector Plug, 3.5 mm Pitch (Qty 4)

787005-01

-

NI

787005-01 - NI

2-Position, Spring Terminal Connector Plug, 3.5 mm Pitch (Qty 4)

Product

Energy Detectors

-

Gentec Electro Optics, Inc.

Gentec Electro Optics, Inc.

Our pyroelectric energy meters cover a very wide range, going from nanojoules to several tens of joules per pulse. They also come in various sizes, from 8 mm to 95 mm in diameter and most of them are available with an optional attenuator.

Product

Luminescence Sensors

DK50-UV

-

Pepperl+Fuchs GmbH

DK50-UV - Pepperl+Fuchs GmbH

DK50-UV luminescence sensors detect marks that blend into a background or are invisible, even on irregular backgrounds, and deliver a sensing range of 600 mm. A light spot with a small focal point allows the user to detect small parts and invisible marking down to 2.2-mm-diameter targets.

Product

Multibus Extender

3690-18

-

VECTOR Electronics and Technology, Inc.

3690-18 - VECTOR Electronics and Technology, Inc.

Length : 7.65"(190.5 mm)Height : 12.0"(304.8 mm)Contacts : 30 Contacts each side on 0.100" centers 43 Contacts each side on 0.156" centersConnector : Gold plated, mounted on top and connected to circuit tracesCurrent Rating : 5 amps at 10°F rise

Product

±6 kV ANSI/ESDA/JEDEC HBM Test System

HBM-TS10-A

-

High Power Pulse Instruments GmbH

HBM-TS10-A - High Power Pulse Instruments GmbH

*±6 kV Human-Body-Model (HBM) tester according ANSI/ESDA/JEDEC JS-001 standard with C = 100 pF, R = 1.5 kΩ discharge network*Wafer, package and system level HBM testing*True HBM: the classical discharge network of the HBM-S1-A according the standard ensures compliant waveforms for all load conditions*No trailing pulses*Integrated 10 kΩ charge removal resistor*Integrated DUT HBM current sensor for real time transient current monitoring with 1V/A output sensitivity into 50 Ω digital oscilloscope input*Integrated DUT HBM voltage sensor for real time transient voltage monitoring with 1/200V/V output sensitivity into 50 Ω digital oscilloscope input*Integrated overvoltage protection of the DUT voltage sensor, DUTcurrentsensor and DC test interface for efficient overload protection of the digital oscilloscope and SMU during high voltage HBM testing*Integrated DC test DUT switch with automatic switch control*Integrated 50 Ω precision hardware trigger output for high speed digital oscilloscopes*Fast HBM measurements, typically 0.5s per pulse including one-point DC measurement between pulses*Eficient sofware for system control and waveform data management (fully compatible with TLP measurement data)*The sofware can control automatic probers for fast measurements of complete wafers*Compact size 145 mm x 82.5 mm x 44 mm of the integrated HBM pulse generator probehead*System controller size 483 mm x 487 mm x 133 mm*High performance and high quality components*Optionally available hardware upgrades to all HPPI fully integrated HBM/HMM/TLP/VF-TLP test systems TLP-3010C, 4010C, 8010A, and 8010C

Product

RF Connectors

AMC4 Connectors

-

Amphenol RF

AMC4 Connectors - Amphenol RF

The AMC4 (Amphenol Micro Coaxial, 4th Generation) connector series is a low profile (0.6 mm height off the board) series with an extremely small board footprint (2 mm x 2 mm).

Product

Inspection Scope

KI-TK1010

-

Kingfisher International

KI-TK1010 - Kingfisher International

Inspection scope & cleaning materials for SC, FC, ST connectors, universal 2.5 mm & 1.25 mm ferrules (LC / 1.25 mm option)