Product

Soil Temperature Probe

TP32MTT.03.A

-

Senseca

TP32MTT.03.A - Senseca

Probe for soil temperature at a depth of 50 mm - protective shield from solar radiations.

Product

SMARC V2.0 SoM With I.MX8M Quad/Dual 1.5 GHz/1.3 GHz (Industrial) SoC, 4GB RAM, 64GB EMMC, CAN, MIPI CSI/DSI And HDMI 2.0

SCM180

-

Axiomtek Co., Ltd.

SCM180 - Axiomtek Co., Ltd.

The SCM180 is a SMARC v2.0 system on module with a choice of quad- or dual-core Arm® Cortex®-A53 processors. The ultra low power, high performance, RISC-based module measures only 82 x 50 mm and utilizes the powerful i.MX 8M processor. Its scalability, optimized pinout schematic and low profile design offers high level of versatility to help system integrators drive their important projects forward. The SCM180 is unique among other SMARC modules of its kind because it features Trusted Platform Module (TPM) for optimum security. With a discrete, dedicated microcontroller designed to support hardware encryption and decryption, the SCM180 delivers enhanced security for an added layer of protection. It also offers a choice of operating temperature ranges and can operate reliably in harsh environments. The SCM180 is suitable for a wide range of smart, portable/mobile-integrated IoT applications including robotics, automotive, factory automation, smart agriculture, casino gaming, medical, retail, surveillance and more. With its NXP artificial intelligence core technologies-enabled capabilities, the SMARC module can be programmed to support smart automation and machine-learning application requirements.

Product

6TL-3X INLINE Header Conveyor 765 mm Length

AQ580

-

6TL Engineering

AQ580 - 6TL Engineering

- PCB up to 600mm length 400 mm width- Programmable transfer speed up to 1 m/s- Automatic Previous/Next speed adjustment- 2D Code reader w/automatic positioning- Pre-wired for second 2D Code reader- Automatic width setting- PC for line management w/UPS with 20” monitor and keypad in adjustable position arm- 24 Ports PoE Switch- Power inlet rack with current protections and line safety relay- Top cover and door w/safety contacts inhibiting line modules while active- Mechanisms self-test- Width auto-adjustment and cyclic width- Non-contact electronic stop of the PCB- 4U Free on the 19” Rack- Interfaces SMEMA 9851 y IPC-HERMES 9852- CE certified

Product

IPX3 IPX4 Rain Test System

CX-RIP3/4

-

Shenzhen Chuangxin Instruments Co., Ltd.

CX-RIP3/4 - Shenzhen Chuangxin Instruments Co., Ltd.

For checking the protection against water with spray nozzle of 0,4 mm bore are used to prove the degrees of protection for the second characteristic numerals 3 and 4 “Protection against Spraying Water” resp. “Protection against splashing Water”.

Product

3 Mm Glassy Carbon Disk Electrode

CGC1

-

PotentioLab

CGC1 - PotentioLab

3 mm glassy carbon disk electrode designed for electrochemical research, cyclic voltammetry (CV), electrochemical impedance spectroscopy (EIS), corrosion studies, electrocatalysis, and sensor development. Manufactured from high-purity glassy carbon with excellent chemical stability, a wide potential window, and low background current. Compatible with CHI104 systems and customizable for laboratory and OEM applications.

Product

Manual Fixture Kit with Changeable Cassette, Max number of probes (2N) 500 units, Max UUT 230 x 175 mm (wxd)

CMK-06

-

Columbia Elektronik AB

CMK-06 - Columbia Elektronik AB

Linear click system with ball bearings, using gas springs.10 mm ESD-proof top cover with aluminum reinforcement bars.Steel base cabinet with detachable aluminum back and bottom panels.Detachable interchangeable case system with an 8 mm spring-loaded probe protection cover.Base cabinet fitted with a telescopic guide rail and catch.

Product

1.0/2.3 Connectors

-

Pasternack Enterprises, Inc.

Pasternack Enterprises, Inc.

Pasternack 1.0/2.3 connector category has many part numbers, most are RoHS and REACH compliant. 1.0/2.3 connector series in this category will terminate to coax or PCB (printed circuit board). Our 1.0-2.3 connectors are built to precise RF and microwave industry specifications. 1.0-2.3 connector series is manufactured in jack or plug gender with 50 Ohm impedance. 1.0-2.3 connectors are available in straight or right angle versions, as well as, bulkhead or mountless options. These 1.0 / 2.3 connector designs include crimp/solder, solder or solder/solder attachment methods. As with the other over 40,000 RF, microwave and millimeter wave Pasternack products, this 1.0/2.3 connector series is in-stock. Not only are these 1.0-2.3 connectors in stock, but they ship the same day as they are purchased.

Product

Electronic Boards

-

Computer Gesteuerte Systeme GmbH

Computer Gesteuerte Systeme GmbH

The relay board 8AGN is a cost-effective board of the CM series, which is also used in our load modules, for example. It can be mounted on a 35 mm DIN rail. Currents up to 1 A at 30 V are possible. The maximum wire cross-section is 0.5 mm².

Product

Terahertz Imager for Material Inspection

T-SENSE FMI

-

HÜBNER Photonics

T-SENSE FMI - HÜBNER Photonics

This highly efficient technology is based on the most recent research results. Production can be monitored and controlled at various levels. T-SENSE FMI uses millimeter waves in the lower terahertz range with no health risks involved. This means that the equipment can be used anywhere and for several purposes without the need for radiation protection.

Product

IEC60335-2-9 Clause 3 Figure 104 Vessel For Testing Induction Hotplates

CX-104

-

Shenzhen Chuangxin Instruments Co., Ltd.

CX-104 - Shenzhen Chuangxin Instruments Co., Ltd.

IEC60335-2-9 clause 3 figure 104 Vessel for testing induction hotplates Parameter : Pot and lid material is mainly Q235, carbon mass fraction <0.08%; 2. The thickness of the wall material is 2 mm;3. The bottom of the pot body can not be outward convex, can not exceed 0.05mm; 4. Pot body and lid surface to be clean 5, size: 110, 145, 180, 220, 300mm each one

Product

Explosion-Proof Differential Pressure Switch, 10 inH2O Sensitivity

H3

-

DWYEROMEGA

H3 - DWYEROMEGA

Explosion-proof, heavy duty, industrial unit has patented and unique new design which provides sensitivity to differential pressures as low as 10 inches of water (254 mm w.c.), yet handles total pressure of 1500 psi (103 bar). Unlike common differential pressure switches that use a piston-type motion transfer, the Series H3 utilizes a rotary motion transfer shaft that prevents a change in total pressure from causing a setpoint shift.

Product

Basic Contact Probes (75 Mil) F07543S064L100

1017280

-

FEINMETALL GmbH

1017280 - FEINMETALL GmbH

The Basic Contact Probes (75 mil) F07543S064L100 are engineered to deliver exceptional performance across a multitude of applications. This probe encapsulates a well-designed structure with an overall length of 33.1 mm, making it versatile for various settings. Operating efficiently within a temperature range of -45°C to +80°C, it assures reliability under diverse environmental conditions. With its notable attributes including a precise pointing accuracy of ±0.08 mm and a nominal travel of 4.30 mm, this probe ensures accurate measurements across its operational range.Delving deeper into its technical capabilities, the probe showcases impressive electrical and mechanical specifications. It can sustain a continuous current of 4.00 A and maintains a typical contact resistance of only 20.00 mOhm. The mechanical design includes a preload force of 50.00 cN and a spring force of 100.00 cN, ensuring robust functionality. The meticulously chosen materials further enhance its durability, featuring a steel plunger with longtime gold plating and a bronze barrel plated in gold, optimized for longevity and performance in demanding scenarios.

Product

Solid Electrolyte Pellet Press Die

TPM1

-

PotentioLab

TPM1 - PotentioLab

10 mm round pellet press die made of high-strength mold steel for solid electrolyte research, powder compaction, and laboratory sample preparation.

Product

Electromechanical Testing Machines

-

infraTest Prüftechnik GmbH

infraTest Prüftechnik GmbH

Stand model in four-pillar design with electronic force transducer, flanged to the movable testing machine crosshead and electronic position transducer for measuring the crosshead path. The machine is driven by a quartz-precise stepper motor with two ball screws. Complete with integrated displacement measuring device 0.01 mm over the entire travel distance as well as additional displacement transducer with connecting cable and holder