Soil Moisture
See Also: Soil, Moisture, Soil Resistivity
-
product
SparkFun Soil Moisture Sensor
The SparkFun Soil Moisture Sensor is a simple breakout for measuring the moisture in soil and similar materials. The soil moisture sensor is pretty straight forward to use. The two large exposed pads function as probes for the sensor, together acting as a variable resistor. The more water that is in the soil means the better the conductivity between the pads will be and will result in a lower resistance, and a higher SIG out.
-
product
Soil Moisture Loger Sensor
NUL-229
This logger sensor is based on measuring the partial vacuum pressure in a tensiometer. A tensiometer is a closed tube with a special ceramic part in its end. The tensiometer is filled with water and put in the soil. If the soil is dry, water goes out by diffusion through the ceramic holes and partial vacuum pressure is created in the tensiometer. When we wet the soil, the partial vacuum in the tensiometer pulls water into the tensiometer and the vacuum decreases. This is why soil moisture is measured in pressure level.
-
product
Soil Moisture Sensor
Modbus RS485
This is a contact-less capacitive soil moisture sensor, a continuation of my I2C soil moisture sensor. This particular version of the sensor is suited for more professional installations where long cable runs is a requirement. It adds a local voltage regulator to mitigate the voltage drop and RS485 transceiver to accommodate long wires, also reverse polarity and an additional ESD protection level is added.
-
product
Soil Moisture, Temperature, and EC Sensors
Soil volumetric water content probes (sometimes referred to as soil moisture sensors) measure the water content of soil. These probes can be used to estimate the amount of stored water in a profile or how much irrigation is required to reach a desired amount of water in the soil. These probes can be used for quick measurements or installed for long-term measurements.
-
product
I2C Soil Moisture Sensor
Capacitive soil moisture sensor interfaced via I2C. Additionaly provides ambient light and temperature readings. Open Source Hardware. Soil moisture sensing, Light sensing, Temperature sensing.
-
product
Soil Moisture Sensor
SoilWatch10
SoilWatch 10 is a soil moisture sensor which allows measuring relative water content in the soil. Our sensor does not have any exposed electrodes that usually corrode in resistive sensors. Whats more the reads will almost not drift over time or with temperature changes. Our sensor will give the same readings regardless of supply voltage. The sensor is weatherproof. It can be buried in soil for extended periods of time without adverse effects on accuracy or reliability. Designed to work with Arduino.
-
product
SparkFun Soil Moisture Sensor (with Screw Terminals)
The SparkFun Soil Moisture Sensor is a simple breakout for measuring the moisture in soil and similar materials. The soil moisture sensor is pretty straightforward to use. The two large, exposed pads function as probes for the sensor, together acting as a variable resistor. The more water that is in the soil means the better the conductivity between the pads will be, resulting in a lower resistance and a higher SIG out. This version of the Soil Moisture Sensor includes a 3-pin screw pin terminal pre-soldered to the board for easy wiring and setup.
-
product
Battery Data Logging Device
FST-AM
Foresight Electronics Co., Ltd.
A data logger, is an electronic instrument that records measurements at set intervals over a period of time. Depending on the particular data logger, measurements can include: air temperature, relative humidity, AC/DC current and voltage, differential pressure, time-of-use (lights, motors, etc.), light intensity, water temperature, water level, dissolved oxygen, soil moisture, rainfall, wind speed and direction, leaf wetness, pulse signals, room occupancy, plug load, and many more.
-
product
Soil Testing Instruments
Soil water hardness meter, soil moisture meter, soil nutrient tester, soil salinity tester, soil water potential tester
-
product
Soil Moisture & Temperature Sensor
Mini-Logger
The PlantCare Mini-Logger is a maintenance-free sensor which records soil moisture and soil temperature. A USB stick is used to easily program the mini-logger and readout the data. The PlantCare DataViewer Software allows a quick and easy display and analysis of the measured data. Fields of application are scientific research, agriculture and garden and landscaping construction.
-
product
Soil Sensors
Delta-T Devices has decades of experience in creating premium-grade equipment for soil moisture measurement and recording. Our soil moisture sensors, data loggers (with cloud connectivity) and readout units are built to exacting standards ensuring ruggedness, longevity, and optimum performance throughout their life. They are used and trusted by researchers around the world and are suited to a wide variety of applications and budgets.
-
product
Concrete / Soil Wall Moisture Meter
This is a precision instrument adopting HF electromagnetic waves to measure the moisture content ratio without damaging the object under test. It can be set depending on different building material to raise its measurement accuracy.
-
product
Soil Mechanics
INSITU
The INSITU program interprets statical and dynamical geotechnical in situ tests. In order to interpret the SPT tests, the program utilises the main correlations that are normally used to determine the geotechnical parameters of a soil. One should enter the geometrical and geotechnical parameters pertaining to the stratigraphy surveyed trough drilling and the number of blows relative to each test; some corrective parameters can be entered that enable one to limit the perturbations in the interpretation of the data caused by the way the test is performed and the type of instrument that is used.
-
product
Moisture Meters
Moisture meters are used to measure the percentage of water in a given substance. This information can be used to determine if the material is ready for use, unexpectedly wet or dry, or otherwise in need of further inspection.
-
product
Soil Temperature Sensors
Soil temperature sensors come in a variety of designs using thermistors, thermocouples, thermocouple wires, and averaging thermocouples. The electrical signals transmitted from the sensors to our dataloggers can be converted to different units of measurement, including °C , °F, and °K. Our dataloggers are also capable of measuring most commercially available soil temperature sensors.
-
product
Moisture Meters
Moisture can be found in any material. Even materials considered to be dry have a minor amount of moisture. An imbalance of moisture, whether it be excessive moisture or too little moisture, can cause problems ranging from undesired mold and bacteria growth to cracks and defects. To avoid a moisture imbalance, it is essential to monitor moisture content with a moisture meter that returns accurate and reliable measuring results. A moisture meter can measure the moisture content of everything from the air (relative humidity) to construction and building materials (concrete, wood) to biomass and agricultural products (hay, straw, grain, corn, beans, pellets) to solid waste (pulp, slurry) and beyond. Many moisture meter devices can also measure temperature. The moisture measurement range of each moisture meter varies depending on the model. Some moisture meter products take moisture measurements, store the moisture measurement data to an internal memory or SD cad, and allow the stored moisture measurement data to be transferred to a computer for detailed analysis by means of an evaluation software. PCE Instruments' moisture meter products come factory calibrated. ISO calibration certificates are available optionally for purchase as accessories to most moisture meter models. An ISO calibration certificate may be important to your company in meeting specific quality standards.
-
product
Moisture Analyzer
5830
The 5830 employs a unique non-equilibrium measurement technique that continuously exposes the gas to wet sample gas followed by dry sample gas, enabling a fast response to both rises and falls in moisture concentration.
-
product
Grain Moisture Moisture Meters/Foam Material Moisture Meters
Used for fast and accurate measurement of moisture in the process of allotment, acquisition, storage, machining of packed grains, feedstuff, powder.
-
product
Moisture Meter
DL7108
The DL7108 enables testing of moisture levels in sawn timber, cardboard, paper, plaster, concrete and mortar.
-
product
Soil Heat Flux Sensors
Soil heat flux sensors may consist of several thermocouples whose measurements are averaged, a single thermopile, or a single thermopile with a film heater. These sensors measure the rate of energy transferred through a surface. Data regarding the amount of energy stored in soil as a function of time is used in energy-balance and Bowen-ratio flux systems.
-
product
Moisture Permeability Tester
DRK501D
Shandong Drick Instruments Co., Ltd.
It is used for the determination of water vapor permeability of rigid foam plastics and other materials.
-
product
Moisture in Oil Transmitter
KT-200
Kongter Test & Measurement Co., Limited
KT-200 is a fast, reliable and accurate online transmitter for water activity (aw) in oil and temperature (T). It is very suitable for integration in OEM application with its rugged housing and excellent performance.KT-200 is ideal for online monitoring of moisture in lubrication, hydraulic or insulation oil, which is significant for the long-term performance and preventive maintenance of plant and machinery.
-
product
Soil Temperature Probe
TP32MTT.03.A
Probe for soil temperature at a depth of 50 mm - protective shield from solar radiations.
-
product
Soil Gas Flux Solutions
From idea to understanding, LI-COR has your soil gas flux research covered. No other solution is as flexible or delivers the same level of proven hardware, gas analyzers, and advanced data analysis software.
-
product
Halogen Moisture Analyzers
Halogen Moisture Analyzers determine the initial weight of the sample. The sample is quickly heated by the internal halogen dryer unit causing moisture to vaporize. During the drying operation, the instrument continuously determines the weight of the sample and displays the loss of moisture.
-
product
Soil Mechanics
I.L.A.
I.L.A. is a complete slope stability analysis program that also incorporates powerful features for retaining system designing.
-
product
Grain Moisture Meter
MC-7825G
Grain moisture meter Model: MC-7825G multifunction for all grain especially for grains. Test code and grain species code grain range. cd01 Wheat/Rye (Whole) 7-31 cd13 Coffee(Whole) 7-31 cd25 Flax (Whole) 5-21 cd02 Wheat/Rye (Ground) 7-29 cd14 Coffee (Ground) 7-26 cd26 Peas (Progreta) (Ground) 5-21 cd03 Paddy (Whole) 7-29 cd15 Coffee Green (Ground) 7-27 cd27 Peas (Ground) 7-27.......
-
product
Building Moisture Meter / Building Material Moisture Meter
A building moisture meter offers the possibility of automatic temperature compensation, storage and later transmission of the measured values to the computer / laptop or even programming your own, specific building material characteristic curves. Depending on the type, many characteristic curves are already stored in the building moisture meter (our premium model has over 500). They can be easily selected. High measuring accuracy and reproducibility are guaranteed.





























