Product

High Sensitivity Shock0 to 5g

TGP-0605

-

Gemini Data Loggers Ltd.

TGP-0605 - Gemini Data Loggers Ltd.

The TGP-0605 measures low level impacts and can be used for machine condition monitoring and the monitoring of expensive and/or fragile shipments.

Product

High Speed High Mix Pick And Place

MC389

-

Manncorp

MC389 - Manncorp

The MC389 sets new standards for SMT pick and place speed, precision, and flexibility. Based on the MC Series’ durable ball-screw and rotary-encoded drive train, its three heads and on-the-fly vision allow accurate placement of any SMD (including 01005 chips, µBGAs, and 12-mil pitch QFPs). With an enormous placement area of 650 mm x 460 mm (25.6" x 18.1") and a capacity for up to 160 Smart Tape and Stick Feeders, the MC389 can easily be configured for virtually any high-mix project.

Product

High Voltage Differential Probe

DP750-100

-

Shenzhen Micsig Instruments Co., Ltd.

DP750-100 - Shenzhen Micsig Instruments Co., Ltd.

*The leads and probe are with shielded design, interface ends are integrated in a compact box, no need to twist the cables, leads to a lower noise floor and has less interference. *Support one-press Zero calibration and automatic overrange alarm.*Directly powered by Micsig UPI interface, realise auto scaling setup, can also powered by oscilloscope via USB cable.

Product

1202a High Frequency Distribution

-

Precise Time and Frequency, Inc.

Precise Time and Frequency, Inc.

The ptf 1202A High Frequency Distribution amplifier provides high performance frequency references for laboratory or system use requiring distribution at frequencies of 30MHz and above.The ptf 1202A is especially designed to distribute the high frequency input signal to 12 separate outputs, with minimum signal distortion and maximum isolation between individual output signals.

Product

High Pressure Mechanical Flowmeter

Flowline

-

Parker Hannifin Corp.

Flowline - Parker Hannifin Corp.

The Flowline Series comprises a range of highly rugged inline mechanical flowmeters that provide visual indication of fluid flow in hydraulic systems. Capable of measuring flows ranging from 1 – 360 LPM. Maximum allowable working pressure: 350 bar.

Product

HIGH FREQUENCY DC BIAS

6565 SERIES

-

Wayne Kerr Electronics, Ltd.

6565 SERIES - Wayne Kerr Electronics, Ltd.

The 6565 HF DC Bias Unit is intended to be used with a Wayne Kerr 6500 analyzer, either the 6500B Precision Impedance Analyzer or the 6500P HF LCR Meter. Its function is to provide a source of DC bias current through the Device Under Test (DUT) while the analyzer is making AC measurements. Each 6565 unit can provide up to 10 A of DC current, and up to six 6565 units can be connected in parallel to supply a maximum 60 A. A digital ammeter on the front panel allows the user to see the dc bias current value and an indicator LED shows when the bias current is enabled.

Product

High Accuracy Revenue Meter

JEMStar II

-

Ametek Power Instruments

JEMStar II - Ametek Power Instruments

The JEMStar II has the highest accuracy in the market, provides many communication options and monitors your power quality to make it the ideal choice for any metering JEM application. An impressive color display makes it easy to view power measurements, phasor displays and meter diagnostics.

Product

High Impedance Active Probes

34A

-

Picoprobe

34A - Picoprobe

Engineered to meet the stringent demands of advanced high frequency circuit designers. This high impedance probe combines full DC capability, rise/fall times of 120 ps, and a nominal loading input impedance of 10 megohm shunted by 0.1 pf. Signal attenuation is 20:1 with a 50 ohm oscilloscope input.

Product

High Speed Digitizers

-

Guzik Technical Enterprises

Guzik Technical Enterprises

High performance and high speed digitizers with wide bandwidth and high dynamic range. Featuring high-speed Analog-to-Digital Converters (ADC) with Real-Time Field Programmable Gate Array (FPGA) based digital processors. Long acquisition memory coupled with fast PCIe offload and streaming over optical data interfaces (ODI).

Product

High Power Variable Attenuators

-

Narda-MITEQ

Narda-MITEQ

High Power Variable Attenuators 50 Watts

Product

High Temperature Test Clip

-

Parrot Invent

Parrot Invent

- High temperature HT Parrot Test Clips PCS-HT , can be efficiently used at high temperature up to 160° Celsius. Plastic body is HT poly-amide.- High temperature HT Parrot Test Clips PCS-HT , can be used in ovens being connected with the silicone cables.

Product

High Voltage Divider

-

Hilo Test GmbH

Hilo Test GmbH

The High voltage divider type HVT ... RC possess from DC up to their cut-off frequencies in the MHz range uniformly excellent transmission characteristics. The voltage divider consists of a resistive branch, which is constructed of high-grade resistance, and a capacitive branch with series damping.

Product

High Voltage Multiplexers

-

6TL Engineering

6TL Engineering

High Voltage Multiplexers.

Product

High Elongation Extensometers

Model 3800

-

Jinan Testing Equipment IE Corporation

Model 3800 - Jinan Testing Equipment IE Corporation

The main body of this unique extensometer remains stationary during testing, held in position by the adjustable magnetic base included. Only the very light, small traveling heads move as the sample elongates during a test. These attach to the sample with small spring clips. Each head pulls a cord out from the extensometer as the head moves. These models use high precision, low friction potentiometers, and, as a result, have a wide range of factory selectable outputs. The extensometer is driven by an excitation voltage and has output proportional to the input. They can be provided with high level outputs (approximately 2-8 VDC) or ones that mimic strain gaged devices (2-4 mV/V). When set to mimic strain gaged extensometers, the Model 3800 can be used with virtually any signal conditioning electronics designed for strain gaged sensors. The potentiometers employ a hybrid wire wound around conductive plastic, which provides excellent long term stability. The output from the extensometer is readily interfaced with most existing test controllers, and may be directly input to data acquisition systems and chart recorders. Please let us know at the time of order what type of output and connector you require.

Product

High Frequency (RF) Testing

-

C.C.P. Contact Probes Co., LTD.

C.C.P. Contact Probes Co., LTD.

CCP designs high frequency testing probes, coaxial probe sockets and pressurized conductive rubber sockets.

Product

High AC Current Capacitor

LC1/LC2/LC3-AN

-

HK Film Capacitor Ltd

LC1/LC2/LC3-AN - HK Film Capacitor Ltd

Induction Heating Processing Equipment, High Current Welding, High Power Resonant Circuits, Motor Controls; Oscillating, Bypass, Coupling circuits, High AC Current applications, High-Frequency AC Filter and Medium Frequency Power applications.

Product

High & Low Temperature Chamber

-

Neware Technology Limited

Neware Technology Limited

NEWARE offers powerful enviromental test chambers to provide comprehensive testing support for your battery testing.

Product

High Temperature Anemometer

6162 Series

-

KANOMAX USA, Inc.

6162 Series - KANOMAX USA, Inc.

The Model 6162 is a unique anemometer designed for specialized high-temperature testing.

Product

High Impedance Preamplifier

1671

-

DL Instruments, LLC

1671 - DL Instruments, LLC

The Model 1671 is a single ended low noise field effect transistor

Product

High Temperature VSM probe

-

Cryogenic Ltd.

Cryogenic Ltd.

To perform measurements at or above room temperature, separate heated sample probes are offered for electrical or magnetic measurements. In normal operation, the CFMS has a continuous temperature range of 1.6 K to 400 K. With these inserts the range can be extended up to 1000 K.

Product

High Power Solutions

-

Gentec Electro Optics, Inc.

Gentec Electro Optics, Inc.

We have the most complete high power product line on the market, with solutions for powers as high as 25 000 W, more upon request.

Product

High Voltage Switching Systems

HXV Series

-

Cytec Corp.

HXV Series - Cytec Corp.

HXV products are high voltage systems intened for Hi-pot / IR or High voltage switching. They can be configured to drive from 32 to 128 switch points per chassis and can be configured as multiplexer (1xN) or Matrix (NxM) configurations. Stand HXV chassis are used for signals up to 5000 VAC rms ( 7400 V peak ) and can carry up to 5 amps of current. Custom systems can be built up to 25KV. Most of the modules used in these systems are 1xN multiplexers or 2x4 matrix modules that can be combined to form larger multiplexers or matrices. Connector options for standard HXV include 5 way banaba jacks / binding posts, Shrouded Banana Jacks or SHV ( High voltage BNC) if you need to use a high voltage cable with a grounded shield for safety applications. Control options include 10/100BaseT Ethernet LAN, RS232, GPIB or optional manual control. Standard HXV systems use high voltage reed relays. Custom HXV systems up to 25KV use application specific relays and connectors from a variety of vendors based on required specifications.