API
1) Application Programming Interface. 2) Angle Position Indicator
See Also: Application Program Interface
-
Product
SQFlash 730 M.2 2242 PCIe/NVMe Gen4 X4 SSD
SQF-C4M 730
Solid-State Drive
NGFF M.2 2242 SSD (M key) Compliant with PCIe Gen. III x4 interface and NVMe 1.4 Support LDPC with RAID ECC, TRIM supported, GUI management tool & software API package.
-
Product
11th Gen. Intel® Core U-Series I7/i5/i3/Celeron 3.5" SBC W/ MIOe
MIO-5375
Single Board Computer
11th Gen. Intel® Core™ Processor with Quad/Dual Cores, TDP 15W/ 28WDual Channel DDR4-3200 up to 64GB4 simultaneous displays: LVDS/ eDP*, HDMI, DP, USB Type-C2 GbE, 4 USB3.1, CAN Bus, DC-in 12-24VExpansion: M.2 E-Key/B-Key/M-Key (supports NVMe) , MIOeSupports iManager, WISE-PaaS/RMM, SW API, and Edge AI Suite
-
Product
Intel® Atom™ SoC E3825/ J1900 Pico-ITX SBC, DDR3L, 24-Bit LVDS, VGA Or HDMI, 1 GbE, Half-Size Mini PCIe, 4 USB, 2 COM, SMBus, MSATA & MIOe
MIO-2263
Single Board Computer
Embedded Intel® Atom™ SoC E3825 & Celeron J1900 up to Quad-Core processor design, DDR3L 1333MHz support up to 8GBIntel Gen 7 DirectX®11.1 support, dual independent display by 24-bit LVDS + VGA or 24-bit LVDS + HDMIFlexible design using integrated multiple I/O: MIOe to approach vertical applications & keep domain knowhowRich I/O interface with 2 COM, 1 SATA, USB3.0, PCIe Mini Card and mSATASupports iManager, SUSI APIs, WISE-DeviceOn and Edge AI Suite
-
Product
Embedded 3.5 SBC System For PCM-9310
EPC-S101
Embedded PC
Intel® Braswell Celeron N3160/N3060, Atom E8000, DDR3L-1600MHz SODIMM up to 8GB.Fanless slim system with wall-mount & desk mount removable flange, default support VESA mount & Din-rail mount at bottom side.Supports 2 x Intel GbE, 8 x USB, HDMI, VGA, 4 x COM and 1 x Digital IO.Built-in 1 x full size mSATA and 1 x full size MiniPCIe w/SIM.Supports iManager, SUSI APIs, WISE-DeviceOn and Edge AI Suite.No RED certification.
-
Product
Intel® Core™ Ultra Series 2 Processors (LGA1851), Up To 24 Core. Support Q870/H810 PCH
AIMB-2710
-
Intel® Core™ Ultra Series 2 Processors, Up to 24 Core. Support Q870/H810 PCHDual channel DDR5 6400MT/s, max. 96GB with two CSODIMMSuper Speed I/O: PCIe x16 Gen5 (32GT/s), USB 3.2 Gen2x1 (10Gbps), 2.5 GbERich expansion: M.2 M key for NVMe SSD, M.2 E key for wireless, 2 SATA and 1 USB4 Type-C12-24V DCinWindows 11 LTSC & Ubuntu 24.04 LTS; SUSI API and WISE-DeviceOn
-
Product
Density/Specific Gravity Meter
D155
-
For Measuring Density, Specific Gravity and API DegreesASTM D1250, ASTM D1298, ASTM D4052, ASTM D7777. The automated CANNON D155 offers a low-cost, affordable alternative to manual hydrometer methods for measuring density and specific gravity with easy, one button operation. Built-in thermal control provides quick, precise measurement with 4 decimal resolution.
-
Product
App and API Performance
-
Attract customers with fast, engaging app and API performance. Improve user experience with robust data insights and automation.
-
Product
Intel Atom N3350 DC Barebone Embedded SBC Fanless Slim System
EPC-S201
Embedded PC
Intel® Atom N3350 Dual Core SoC.Semi-Industry Fanless slim systen, Din Rail or Wall mount design.VGA display, COM port, 2 USB3.0, 1 LAN at Front.1 DIO port, 1 COM port at Side.Supports iManager, SUSI APIs, WISE-DeviceOn and Edge AI Suite.No RED certification.
-
Product
Intel® 8th. Gen. Core I7/i5 Processor Fanless Embedded System
EPC-C301
Embedded PC
Intel 8th. Gen. Core Processor with Quad/Dual Cores (i7/i5), TDP 15W.Semi-Industry Fanless slim systen, Din Rail or Wall mount design.HDMI + DP* (Support vai MIO) dual display.4 GbE, 4 USB3.1, 4 USB 2.0, CAN Bus, M.2 M-Key 2280 supports NVMe, M.2 E-key 2230, M.2 B-key, 1 full size of mini PCIe, DC-in 12V.-20 ~ 60 degree extend temperature operating.Supports iManager, SUSI APIs, WISE-DeviceOn and Edge AI Suite.No RED certification.
-
Product
AMD Ryzen™ Embedded R2000 Series 3.5" SBC
MIO-5376
-
AMD Ryzen Embedded R2000 Processor with Quad Cores, TDP 15W/ 28WDual Channel DDR4-2667 up to 32GB3 simultaneous displays: LVDS/HDMI/DP3 GbE, support optional PoE PSE Dual port 15.4W (Module: MIOe-PSE)Expansion: M.2 E-Key/B-Key/M-Key (supports NVMe)Supports iManager & Software APIs, WISE-DeviceOn
-
Product
Dynatrol® Digital Density Converters
Series 2000
-
For increased speed and accuracy, use the Series 2000 Digital Converters with all Dynatrol® Density Cells. Microcontroller technology measures to meet your needs: Density, Specific Gravity, °Brix, Baumé, API Gravity, Percent Solids, Percent Concentration, °Twaddle of liquids and slurries.
-
Product
8th/9th Gen Intel® Core™ Processor LGA1151
AIMB-286EF
-
Supports Intel® 8th/9th Gen Core™ i processor (LGA1151) with Intel H310 chipsetOne 260-pin SO-DIMM up to 32GB DDR4 2666 MHz SDRAMSupports PCIe x 16 (Gen 3), 1 M.2 B key, 1 M.2 E key, 2 COM, 4 USB 3.0 and 3 SATA IIISupports dual display of DP/HDMI/LVDS(or eDP)Supports TPM 1.2 / 2.0 (optional)THIN Mini-ITX with 12V DC InputSupport Windows10 LTSC, Ubuntu 20.04 LTS, SUSI API, and WISE-DeviceOn
-
Product
Ultra Wideband RF/IF Rugged Rackmount Recorder
Talon RTR 2742
-
- Sample rates up to 6 GHz- Real-time sustained recording rates up to 6 GB/sec- Integrated DDCs and DUCs- Record up to 2.4 GHz wide bandwidth signals- Playback up to 1.28 GHz wide bandwidth signals- Up to 122 TB of front-panel removable solid state storage- 4U 19-inch industrial grade server chassis- SystemFlow® GUI with Signal Viewer analysis tool- C-callable API for integration
-
Product
Performance & Load Testing for APIs, Mobile and Web Apps
-
Test the performance of any mobile app, website or API in under 10 minutes. Simulate up to one million users with our developer-friendly, self service platform. 100% compatible with Open Source Apache JMeter. Supports Selenium.
-
Product
SQFlash 830 Series Industrial 2.5" SATA SSD
SQF-S25 830
-
Compliant with SATA III and SATA v3.2 standard, Supports 120 bit ECC correct per 2K Byte data. Supports Fragment Writing and Flush Manager, Optional support for AES and voltage stabilizer. Shock resistance, anti-vibration and low power consumption, GUI management tool & software API package.
-
Product
Gas Calibrators and Zero Air Generators
-
Teledyne Advanced Pollution Instrumentation
All T Series instruments offer two front-panel USB ports, an advanced touch screen full color display, customizable user interface with predictive maintenance alerts, one-touch real-time graphing, and multiple language support. Teledyne API offers an extensive line of high quality gas calibrators and zero air generators to meet even the most demanding applications.
-
Product
WinSock Trace / Debug Utilities
SocktSpy
-
The Socket Spy programs are Trace/Debug utilities used for monitoring WINSOCK API references between an application and the Windows Sockets Dynamic Link Library. Socket Spy/16 operates under Windows 3.1 and is fully compatible with the WinSock Ver 1.1 standard.
-
Product
Application Performance Management
-
Enterprise-class testing and monitoring platform for websites, applications and APIs. Internationally distributed load testing and monitoring agents can regularly and programmatically check your targeted websites. web applications, API services, authentication services, certificates, DNS services, and more for performance and service-level compliance.
-
Product
ARINC825 Cards
-
AIM’s ARINC825 cards can work either with full functionality as an active CAN node for testing and simulating or in listening only mode for monitoring and recording purposes of Avionic CAN bus (ARINC825) applications on up to 4 electrically isolated CAN bus nodes concurrently. All nodes are in conformance with the ISO11898-1/-2 standard. They are accessible by software separately and can be used as 4 independent CAN bus nodes. An onboard IRIG-B time decoder allows users to accurately synchronize single or multiple modules to a common time source. All supported signals are available through front I/O and rear I/O interface. ARINC825 cards consist of FPGA based CAN interface controllers as well as a FPGA based 32-bit microcontroller core and a separate processor for IRIG-B synchronization with high resolution time stamping. All nodes are operating concurrently at CAN bus high speed bit rate of up to 1Mbit/s with the intelligence to process scheduling of CAN frames in real time onboard to significantly off-load the host processor.For embedded applications the AMC825-4 PMC module is available in a conduction cooled version. Using AIM’s family of PCI, CPCI (3U and 6U) and VMEbus carrier cards for PMC our clients have off the shelf solutions in a broad range of card formats. ARINC825 (CAN bus) modules are delivered with an Application Programming Interface (API) and Driver Software compatible with Windows, Linux and VxWorks.An ARINC825 Resource Component is available for AIM’s PBA.pro™ databus test and analysis tool including Tx and Rx simulation capabilities, a Chronological Bus Monitor and support for decoding of payload data within CAN messages. This allows to implement a powerful ARINC825 (CAN bus) analyzer or a complete test system in conjunction with other AIM avionics databus interfaces and PBA.pro™ supported 3rd party hardware.
-
Product
Managed Threat Detection Service
GuardDuty
-
Amazon GuardDuty is a managed threat detection service that continuously monitors for malicious or unauthorized behavior to help you protect your AWS accounts and workloads. It monitors for activity such as unusual API calls or potentially unauthorized deployments that indicate a possible account compromise. GuardDuty also detects potentially compromised instances or reconnaissance by attackers.
-
Product
Azure Data Share
-
Share data, in any format and any size, from multiple sources with other organizations. Easily control what you share, who receives your data, and the terms of use. Data Share provides full visibility into your data sharing relationships with a user-friendly interface. Share data in just a few clicks, or build your own application using the REST API.
-
Product
Between Bearings Pumps
-
Flowserve between-bearing pumps comply either with ISO, ASME or API standards. These pumps are available in a variety of designs like single or double case, axially or radially split with single-stage or multistage impeller. These configurations guarantee reliable and efficient pumping processes. Numerous sizes, hydraulics and material combinations are particularly well suited for use in applications where uncompromising reliability and efficiency over a wide flow range are key.
-
Product
Measurement Services
-
API offers on-site dimensional inspection, 3D scanning, machine tool and robot error mapping and calibration, laser tracker calibration/verification.
-
Product
Automated Gage Measurement System
AGMS
System
Our Automated Gage Measurement System for Sand Screen (AGMS) provides accurate and repeatable optical measurements for all wire-wrapped gaps along the full screenlength. This inspection machine enables oil field sand screen manufacturers to meet the measurement requirements of API Spec 19S1 and ISO 17824:2009.
-
Product
AFDX ® / ARINC 664 Test Cards
-
Our AFDX ® / ARINC664 test cards can be used for test and simulation applications in which it is necessary to send and receive data via the AFDX® data bus. They support the 10/100 Mbit / s ARINC 664 Part 7 Ethernet interface as well as the next generation 1 Gbit / s Ethernet. / ARINC 664 test cards are delivered with device drivers, high-level interfaces (APIs) for Windows Linux, VXWorks and LabVIEW / LabVIEW Real-Time (further on request).
-
Product
Cloud-based API Testing & OpenAPI Documentation Auto- Generator
Swagger Inspector
-
Swagger Inspector is the newest and easiest way to test and auto-generate OpenAPI documentation for any API. Using Inspector, developers can easily call any API end-point, and see if the response is what was expected. Inspector’s simple UI is built to allow developers to test as quickly as possible without any learning curve or process change.
-
Product
SQFlash 660BR Series Industrial 2.5" SATA SSD
SQF-S25 660BR
-
SQFlash 660BR series industrial 2.5" SATA SSD, Backup & Recovery function support. Compliant with SATA III and SATA v3.2 standard, Support hardware GPIO and software triggering. Logical Block Recovery, Supports LDPC & RAID ECC. GUI management tool & software API package.
-
Product
Digital Attenuator Operating Frequency of 1 to 20 GHz
LDA Series
-
The LDA series of Lab Brick® RF and Microwave Programmable Digital Attenuators includes 50 Ohm and 75 Ohm bidirectional RF step attenuators with calibrated operation up to 20 GHz. These USB powered and controlled units require no additional DC supply voltage. They are easily programmable for fixed attenuation or swept attenuation ramps directly from the included GUI. Lab Brick Digital Attenuator API DLL, Linux drivers and LabVIEW-compatible drivers are also available for custom programming applications.
-
Product
STANAG3910/EFEX Modules
-
AIM’s STANAG3910/EFEX test, simulation, monitoring and analysis modules use our field proven Common Core hardware design giving you the best performance, best feature set and highest functional integration on the market. The use of SoC (System on Chip) based core designs with multiple processors for real time bus protocol and application support, massive memory and IRIG-B time code encoder/decoder functions are standard. The latest versions also support avionics discrete I/O. Configurations with dual redundant concurrent HS/LS Bus Controller (BC), Multiple Remote Terminals, and Chronological/Mailbox Bus Monitor operation with full HS/LS protocol error injection/detection, multi-level triggering, advanced capture/filtering and real time bus recording, time stamping and physical bus replay ensure your bus integrity. Support for EFAbus Direct Digital Links (DDL), Fibre Optic DDL (FODDL) and EFAbus Express extensions (Mixed Mode and Dual Mode operation) are available. To support the French ‘Rafale’ aircraft, modules are available with an Electrical Front End. Single Function variants support cost effective solutions. Each module is delivered with a Board Support Package (BSP) containing the onboard driver software, a full Application Programming Interface (API) and detailed getting started and programming guides. Powerful PBA.pro databus test and analysis software is optionally available for all our STANAG3910 modules.
-
Product
Adapter
EXC-1553UNET/Px(S)
-
The EXC-1553UNET/Px is an intelligent, single - or - dual channel, MIL-STD-1553 adapter. Its small size and ability to interface through USB or Ethernet interfaces make it a complete solution for developing, testing and performing system simulation of the MIL-STD-1553 bus, both in the lab and in the field.The EXC-1553UNET/Px shares its API with the entire Px family so that applications currently running on PCI, PCIe, ExCARD or PCMCIA boards will run without change on this device.Multiple units can operate via USB ports on the same computer. In addition, multiple units can operate on the same network, by programming each one with a unique IP address, and can be accessed from any computer on the network.
