2 X91 to 4) 50 Ohm 2.5Ghz RF Multiplexer

YAVHF3X450 - 6TL Engineering (Sistel)

Fixture friendly. Use this product inside a Faraday chamber, and benefit from the fact that wiring in-out the chamber is drastically reduced!

Product Home Contact/Sales Distributors/Reps Company Catalog Share Add To List

Multiplexers

6TL Engineering

Capable of performing the necessary switching between test points of the device under test, to give access to low frequency measuring instruments, in electronic test systems based on tool receivers.

Product Home Contact/Sales Distributors/Reps Company Catalog Share Add To List
128-Ch Multiplexer/Matrix

YAV90128 - 6TL Engineering

A unique YAV90128 module is able to do all combinations of signal computation at low frequency between the device under test and the various measuring instrumentation inside a test system.

Product Home Contact/Sales Distributors/Reps Company Catalog Share Add To List
160-Ch Multiplexer/Matrix

YAV90057 - 6TL Engineering

The YAV90057 is a High density multiplexer, with 10-bank, 16-channel, 1 pole. It uses high quality electro-mechanical relays allowing each channel to switch current up to 2A and voltage up to 220VDC/250VAC.

Product Home Contact/Sales Distributors/Reps Company Catalog Share Add To List
32-Ch Multiplexer

YAV90063 - 6TL Engineering

The YAV90063 module is suitable for switching inductive/capacitive loads up to 5A at 250VAC. It uses high quality electro-mechanical relays allowing each channel to switch voltage up to 220VDC/250VAC.

Product Home Contact/Sales Distributors/Reps Company Catalog Share Add To List
32-Ch Multiplexer

YAV904X8 - 6TL Engineering

The YAV904X8 features 32 channels of DPST relays distributed in 4-banks. The module uses electro-mechanical relays allowing each channel to switch current up to 2A and voltage up to 125VAC.

Product Home Contact/Sales Distributors/Reps Company Catalog Share Add To List
64-Ch 2A-250VAC 24VDC Mux/Matrix

YAV90059 - 6TL Engineering

The YAV90059 module can be configured in different ways depending the application needed: from 8-bank, 16-channel, 1 pole to 8-bank, 8-channel, 2 pole, or also 128 Channel 1-pole among other possibilities. It uses high quality electro-mechanical relays allowing each channel to switch current up to 2A and voltage up to 220VDC/250VAC.

Product Home Contact/Sales Distributors/Reps Company Catalog Share Add To List
2x (1 to 8) +1X (2 to 1) 50 Ohm 2.5GHz RF Multiplexer Terminated

YAV92501 - 6TL Engineering

2x (1×8) Mux + 1×2 + 2x Pass trough 30Vac/dc, 10W Max Max current 500mA Control port CAN o Ethernet (con Ethernet to CAN Gateway) Dissipative

Product Home Contact/Sales Distributors/Reps Company Catalog Share Add To List
4x (1 to 4) +1x (4 to 1) 50Ohm 2.5 GHz RF Multiplexer with Self Test Relays

YAVAL022 - 6TL Engineering

5x (1×4) Mux + 2x Pass trough Selftest function 30Vac/dc, 10W Max Max current 500mA Reflexive

Product Home Contact/Sales Distributors/Reps Company Catalog Share Add To List
6x (1 to 4) 50 Ohm 2.5 GHz MCX Multiplexer

YAVAL034 - 6TL Engineering

6x (1 to 4) MMCX connectors CAN Control (or Ethernet with Ethernet to CAN Gateway) Reflective

Product Home Contact/Sales Distributors/Reps Company Catalog Share Add To List
RF Multiplexer

YAVAL040 - 6TL Engineering

4x (1 to 8) MMCX connectors CAN Control (or Ethernet with Ethernet to CAN Gateway) Reflexive

Product Home Contact/Sales Distributors/Reps Company Catalog Share Add To List
2 x(1 to 4) 50 Ohm 2,5GHz RF Multiplexer with CAN

YAVHF3X4C50 - 6TL Engineering

Fixture friendly. Use this product inside a Faraday chamber, and benefit from the fact that wiring in-out the chamber is drastically reduced! This module features three multiplexers in cascade configuration, for frequencies up to 2,5GHz. In/out is through SMB connectors, selectable for 75 and 50 Ohm. There’s direct control of the relays (24Vdc) or integrating CAN bus interface.

Product Home Contact/Sales Distributors/Reps Company Catalog Share Add To List
8-Ch Mux

H62004700 - 6TL Engineering

This module is ideal for switching up to 12A. Composed by eight relays organized in two trees of four with two relays (One in each tree) with NC contact available. The module is shielded in order to reduce the radiated interference in high current switchings.

Product Home Contact/Sales Distributors/Reps Company Catalog Share Add To List