Fire, Gas & Intruder Controllers & Alarms

MultiSafe-MX - Teledyne Gas & Flame Detection

The MultiSafe-MX system is intended for the protection of high hazard, high risk plant and facilities.

The MultiSafe-MX is certified, by European laboratories, to comply with the applicable regulations.

The panel is composed of dedicated cards, installed in 19” racks which have their own “intelligence”, programmed for active/passive fire protection, gas detection, intruder alarm and logic functions. Moreover, the MultiSafe-MX can interact with supervisory and SCADA systems via Ethernet, TCP/IP or Modbus.

The MultiSafe-MX interfaces with devices using either conventional and/or addressable module inputs and outputs. These modules are used to tailor the system to customer requirements.

Product Home Contact/Sales Datasheet Company Catalog Share Add To List

Controllers & Alarms

Teledyne Gas & Flame Detection

Equip yourself with high-performance gas detection systems thanks to Teledyne Gas and Flame Detection! Our selection offers several ranges of units and alarms compatible with your gas detectors.

Product Home Contact/Sales Company Catalog Share Add To List
Controller

8800 Controller - Teledyne Gas & Flame Detection

The 8800 controller provides simultaneous display and alarm functions for up to 16 input variables. 8 or 16 channel display modes, and I/O modules arranged in groups of 8 channels, allow economical configuration of systems. This easy-to-configure, user friendly controller is ideal for centralizing display and alarm functions in critical multipoint monitoring applications.

Product Home Contact/Sales Datasheet Company Catalog Share Add To List
Audio Visual Alarm Station

AV1-C1D2E - Teledyne Gas & Flame Detection

The AV1-C1D2E audio-visual alarm station is designed for installation and use in heavy industrial environments. The alarm station consists of a beacon and alarm horn. The warning light comes in field interchangeable dome colors of amber, blue, clear, green, red, yellow and magenta.The hazardous location combination AV1-C1D2E alarm horn sounder & beacon/status warning light is UL/cULs/ULC approved for Class I Div 2, Class II Div 2, Class I Zone 2/22 as well as IECEx and ATEX certified for Zone 2 and 22 applications.The 24 VDC version is UL and cUL approved to UL464 & UL1638 for private mode fire alarm use.

Product Home Contact/Sales Company Catalog Share Add To List
Gas Detection Car Park System

CPS - Teledyne Gas & Flame Detection

The CPS car park air monitor accurately and reliably protects the public and employees from airborne toxic gases in parking facilities and tunnels. The system was designed to comply with the high air quality safety standards enforced in such European countries as Germany, the Netherlands and Belgium.

Product Home Contact/Sales Manual Company Catalog Share Add To List
Alarms

IP66 Series - Teledyne Gas & Flame Detection

The IP66 Series of Models A-IP66, V-IP66 and AV1-IP66 consist of an audible sounder (A), a visual beacon (V) or a combination of the two (AV1).All of these options come in impact resistant plastic housings that are rated to IP66 for dust and water ingress protection.The visual warning beacon comes in field interchangeable lens colors of amber, blue, clear, green, red, yellow and magenta.

Product Home Contact/Sales Datasheet Company Catalog Share Add To List
Integrated Gas Alarm & Control System

MCX-32 - Teledyne Gas & Flame Detection

The MCX-32 controller features a flexible design that allows the user to customize a system by choosing from a selection of individually addressable field devices or use addressable input and output modules. Detcon’s full range of gas sensors (purchased separately) can be used to create a gas detection system consisting of toxic gas, combustible gas, and/or oxygen deficiency. A wide range of field devices such as liquid level, temperature, pressure, flow, etc., can also be configured for input to the control system. Four standard I/O modules are available: a 4-channel 4-20mA input module (DA-4), a 4-alarm relay output module (RL-4), a 4-channel 4-20mA output module (AO-4), and a 4-relay contact input module (DI-4). I/O modules are din-rail mounted and stackable allowing for seamless system expansion. The I/O modules may be mounted within the main system enclosure or in separate enclosures suitable for the area classification where installation will occur. In many cases using distributed I/O nodes can significantly reduce wiring and installation costs.

Product Home Contact/Sales Manual Company Catalog Share Add To List
One Channel Gas Controller

MX 16 - Teledyne Gas & Flame Detection

Specially designed for applications in laboratory, storage, small boiler room, and breweries or battery charging rooms, the MX 16 measuring unit prevents the risks of explosion linked to the presence of toxic, anoxic and explosive gases in the ambiant air. Small size, ease of installation and use are the main strengths of the plant. Used with the OLCT 10N O₂ and CO₂ digital sensor series or any other O₂, CO₂, CH₄, GPL and H₂ analog sensor, the MX 16 guarantees you a solution that complies with French and European standards.

Product Home Contact/Sales Company Catalog Share Add To List
Control Unit

MX 256 - Teledyne Gas & Flame Detection

The MX 256 is a digital control unit intended for the detection and measurement of gases present in the atmosphere and more generally for the processing of any digital signal from digital sensors (OLCT 10N types), relay module, analog output module, logic input module. Thanks to its new option, an industrial controller module or remote HMI, it is possible to add analog input modules for sensor-transmitter connection (4-20 mA) and / or relay modules, this allows to not only extend the capacities but also to have event recordings (Location, Alarms,.....) and to have access to the data via the embedded web page.

Product Home Contact/Sales Company Catalog Share Add To List
Analog & Digital Gas Controller

MX 32 - Teledyne Gas & Flame Detection

We introduce the new MX 32, a controller that takes analog & digital inputs and covers all needs for a wide variety of applications.The MX 32 is a compact, low-profile controller that continuously monitors gas detection and more generally any 4-20 mA, MODBUS RS485 signal from compatible detectors.

Product Home Contact/Sales Manual Company Catalog Share Add To List
Gas Detection Controller

MX 43 - Teledyne Gas & Flame Detection

Fully scalable, and designed to functional safety performance level 1 standards, the MX 43 is an analog and digital controller that continuously measures and controls gases in the atmosphere. The MX 43 gas detector manages both digital lines and analog channels, and covers all needs for a wide variety of gas monitoring applications. The MX 43 digital technology allows up to 32 detectors to be distributed on 8 lines for increased cost savings.

Product Home Contact/Sales Manual Company Catalog Share Add To List
Gas Detection Controller

MX 52 - Teledyne Gas & Flame Detection

The MX 52 control unit allows various detectors to be connected and monitored. Any gas detector from Teledyne Gas and Flame Detection or any other 4-20 mA device can be monitored and controlled.The modular design and flexibility enable this MX 52 gas detection equipment to be adapted to your exact requirements.

Product Home Contact/Sales Manual Company Catalog Share Add To List
Gas Detection Controller

MX 62 - Teledyne Gas & Flame Detection

An attractive solution for gas and flame detection needs, the MX 62 is a modular and flexible controller that is easy to install and reduces operational costs.The MX 62 system meets the requirements of ATEX 100 A and offers the high level of security required by SK2 and SIL3 rated systems.Cost Effective and Secure InstallationThe structure of the MX 62 system has been developed to provide redundancy. Reliable data is passed quickly from the detectors to the relays.

Product Home Contact/Sales Manual Company Catalog Share Add To List
Control Unit

MX 62 TP - Teledyne Gas & Flame Detection

Bringing together the latest data logger and alarm unit for gas and flame detection systems, the MX 62 TP features an innovative HMI interface specifically designed to facilitate user-controller interactions.This interaction is simplified by a large, fully interactive 10" (up to 15") high-definition colour touchscreen, allowing for clearer visualisation of critical gas detection data.

Product Home Contact/Sales Company Catalog Share Add To List
One Channel Gas Controller

Surveyor 4B - Teledyne Gas & Flame Detection

Teledyne Gas and Flame Detection has designed the SURVEYOR 4B as a monitoring apparatus specifically designed to ensure the safety of boiler plants, battery charging rooms or small units where your operations are at risk due to the possibility of flammable gas leaks.Developed for quick, safe detection, the SURVEYOR 4B control module combines highly reliable monitoring, simple implementation and low costs.

Product Home Contact/Sales Company Catalog Share Add To List
Gas & Flame Detection System

Syntel - Teledyne Gas & Flame Detection

Syntel is an addressable loop system suitable for use in zone 1 and 2 hazardous areas. The complete addressable loo is fault tolerant operating normally with a short or open circuit. Syntel does not have a CPU, so there is no common failure point. It includes a standard OPC interface and can also be supplied by Modbus allowing easy integration with third party systems.Syntel stores alarm and calibration information in distributed non-volatile memory, hence there is no reliance on a centralized system.Syntel is ideal for installations where there is the possibility for future expansion. The system architecture allows very low cost expansion as cable runs to a central location are not needed.

Product Home Contact/Sales Company Catalog Share Add To List
Multichannel Gas Alarm & Control System

X40 - Teledyne Gas & Flame Detection

Your product description goes here.

Product Home Contact/Sales Company Catalog Share Add To List