PXI 16 Trib Daisy Chain Switch Balanced 96 W

Differential & Telecoms PXI Switching Modules

Ideal for switching signals carried as differential signals where a controlled differential impedance is required

Product Home Contact/Sales Distributors/Reps Company Catalog Share Add To List

PXI Dual 18 Channel MUX, 96-Pin SCSI Connector

40-735-912-S1 - Pickering Interfaces Ltd.

The 40-735 data communications multiplexer is designed for switching the data lines of serial interfaces (RS232, USB). Careful attention to the design of the module ensures that the switching system minimizes its impact on the transmission distance of USB1.1 interfaces. The MUX is available in 36:1 or 18:1 formats and enables a single source of serial data to be switched to one of 36 or 18 devices under test. This allows the data source to load information to, or receive information from, the device under test. The 36:1 version can be software configured into two independent 18 way MUXs enabling two separate sources of serial data to be connected to separate banks of 18 devices. The module is ideal for performing bulk testing of any device that relies on a serial data communications port to load software or control the device operation. It can also be used for a variety of other applications where ever a 2-pole low power MUX is required.

Product Home Contact/Sales Distributors/Reps Datasheet Company Catalog Share Add To List

PXI Single 36 Channel MUX, SMB Connectors

40-735-912-S4 - Pickering Interfaces Ltd.

The 40-735 data communications multiplexer is designed for switching the data lines of serial interfaces (RS232, USB). Careful attention to the design of the module ensures that the switching system minimizes its impact on the transmission distance of USB1.1 interfaces. The MUX is available in 36:1 or 18:1 formats and enables a single source of serial data to be switched to one of 36 or 18 devices under test. This allows the data source to load information to, or receive information from, the device under test. This 36:1 version can be software configured into two independent 18 way MUXs enabling two separate sources of serial data to be connected to separate banks of 18 devices. The module is ideal for performing bulk testing of any device that relies on a serial data communications port to load software or control the device operation. It can also be used for a variety of other applications where ever a 2-pole low power MUX is required.

Product Home Contact/Sales Distributors/Reps Datasheet Company Catalog Share Add To List

PXI Single 10 Channel MUX, XLR Connectors

40-735-902-S2 - Pickering Interfaces Ltd.

The 40-735 data communications multiplexer is designed for switching the data lines of serial interfaces (RS232, USB). Careful attention to the design of the module ensures that the switching system minimizes its impact on the transmission distance of USB1.1 interfaces. The MUX is available in 36:1 or 18:1 formats and enables a single source of serial data to be switched to one of 36 or 18 devices under test. This allows the data source to load information to, or receive information from, the device under test. The 36:1 version can be software configured into two independent 18 way MUXs enabling two separate sources of serial data to be connected to separate banks of 18 devices. The module is ideal for performing bulk testing of any device that relies on a serial data communications port to load software or control the device operation. It can also be used for a variety of other applications where ever a 2-pole low power MUX is required.

Product Home Contact/Sales Distributors/Reps Datasheet Company Catalog Share Add To List

PXI Single 18 Channel MUX, BNC Connectors

40-735-902-S3 - Pickering Interfaces Ltd.

The 40-735 data communications multiplexer is designed for switching the data lines of serial interfaces (RS232, USB). Careful attention to the design of the module ensures that the switching system minimizes its impact on the transmission distance of USB1.1 interfaces. The MUX is available in 36:1 or 18:1 formats and enables a single source of serial data to be switched to one of 36 or 18 devices under test. This allows the data source to load information to, or receive information from, the device under test. The 36:1 version can be software configured into two independent 18 way MUXs enabling two separate sources of serial data to be connected to separate banks of 18 devices. The module is ideal for performing bulk testing of any device that relies on a serial data communications port to load software or control the device operation. It can also be used for a variety of other applications where ever a 2-pole low power MUX is required.

Product Home Contact/Sales Distributors/Reps Datasheet Company Catalog Share Add To List

Interface Board, Low Cost, 8:1 Ethernet RJ45

40-965-901 - Pickering Interfaces Ltd.

Low cost converter card for 40-736 Data Communications Multiplexer. Adapts the 78-Pin D-type connector on the front of the module to 9 RJ45 sockets. Allows the multiplexing of up to 8 Ethernet signals with speeds up to 1G bit.

Product Home Contact/Sales Distributors/Reps Datasheet Company Catalog Share Add To List

Interface Board, Compact, 8:1 Ethernet RJ45

40-965-907 - Pickering Interfaces Ltd.

Compact converter card for 40-736 Data Communications Multiplexer. Adapts the 78-Pin D-type connector on the front of the module to 9 RJ45 sockets. Allows the multiplexing of up to 8 Ethernet signals with speeds up to 1G bit.

Product Home Contact/Sales Distributors/Reps Datasheet Company Catalog Share Add To List

Interface Board for Gigabit Ethernet

40-965-910 - Pickering Interfaces Ltd.

The 40-965-910 is a converter card for the 40-201 Ethernet/AFDX Fault Insertion Switch. Adapts the 78-Pin D-type connector on the front of the module to 4 RJ45 sockets and one 9-way D-type connector for fault signals. Allows the fault insertion testing of Gigabit Ethernet signals.

Product Home Contact/Sales Distributors/Reps Datasheet Company Catalog Share Add To List

Interface Board for 100 BaseT Ethernet

40-965-911 - Pickering Interfaces Ltd.

The 40-965-911 is a converter card for the 40-201 Ethernet/AFDX Fault Insertion Switch. Adapts the 78-Pin D-type connector on the front of the module to 8 RJ45 sockets and one 9-way D-type connector for fault signals. Allows the fault insertion testing of 100 BaseT Ethernet signals.

Product Home Contact/Sales Distributors/Reps Datasheet Company Catalog Share Add To List

PXI/PXIe MIL-STD-1553 Multiplexer, Single 4-Channel, 2-Pole

40-739-005 - Pickering Interfaces Ltd.

The 40-739-005 (PXI) and 42-739-005 (PXIe) are single 4-channel 2-pole multiplexers designed specifically for physical layer multiplexing or demultiplexing differential signals that conform to the MIL-STD-1553 specification. The module can be supplied as a single or dual 16-channel 2-pole multiplexer with each signal pair having a controlled 78 Ohm differential impedance.

Product Home Contact/Sales Distributors/Reps Datasheet Company Catalog Share Add To List

CAN/FlexRay/Differential Bus PXI Fault Insertion Switch - 4 Channel

40-200-004 - Pickering Interfaces Ltd.

Each channel can support up to 0.3A and is rated to handle up to 100V between the wire pairs. The wire pairs have controlled transmission line impedance suited to most differential pair signaling systems, including fast CAN Bus interfaces and RS232. Each fault bus is capable of carrying 2A allowing multiple channels to be connected to the same fault condition. Additionally, each fault bus features a changeover relay to allow the user to connect alternative fault conditions to the fault buses.

Product Home Contact/Sales Distributors/Reps Datasheet Company Catalog Share Add To List

PXI/PXIe MIL-STD-1553 Multiplexer, Dual 4-Channel, 2-Pole

40-739-006 - Pickering Interfaces Ltd.

The 40-739-006 (PXI) and 42-739-006 (PXIe) are dual 4-channel 2-pole multiplexers designed specifically for physical layer multiplexing or demultiplexing differential signals that conform to the MIL-STD-1553 specification. The module can be supplied as a single or dual 16-channel 2-pole multiplexer with each signal pair having a controlled 78 Ohm differential impedance.

Product Home Contact/Sales Distributors/Reps Datasheet Company Catalog Share Add To List

PXI/PXIe MIL-STD-1553 Multiplexer, Dual 4-Channel, 2-Pole

42-739-006 - Pickering Interfaces Ltd.

The 40-739-006 (PXI) and 42-739-006 (PXIe) are dual 4-channel 2-pole multiplexers designed specifically for physical layer multiplexing or demultiplexing differential signals that conform to the MIL-STD-1553 specification. The module can be supplied as a single or dual 16-channel 2-pole multiplexer with each signal pair having a controlled 78 Ohm differential impedance.

Product Home Contact/Sales Distributors/Reps Drawing Datasheet Manual Company Catalog Share Add To List

PXI 18 Channel Data Comms MUX, 96-pin SCSI

40-735-902 - Pickering Interfaces Ltd.

The 40-735 data communications multiplexer is designed for switching the data lines of serial interfaces (RS232, USB). Careful attention to the design of the module ensures that the switching system minimizes its impact on the transmission distance of USB1.1 interfaces. The MUX is available in 36:1 or 18:1 formats and enables a single source of serial data to be switched to one of 36 or 18 devices under test. This allows the data source to load information to, or receive information from, the device under test. The 36:1 version can be software configured into two independent 18 way MUXs enabling two separate sources of serial data to be connected to separate banks of 18 devices. The module is ideal for performing bulk testing of any device that relies on a serial data communications port to load software or control the device operation. It can also be used for a variety of other applications where ever a 2-pole low power MUX is required.

Product Home Contact/Sales Distributors/Reps Datasheet Company Catalog Share Add To List

Ethernet/AFDX/BroadR-Reach PXI Fault Insertion Switch - 4 Channel

40-201-004 - Pickering Interfaces Ltd.

This high bandwidth differential fault insertion module is designed to simulate common faults on high speed two wire communication interfaces such as Ethernet. This module supports 4 or 8-channels of two wire serial connections and can be used for simulating faults on Ethernet, AFDX, BroadR-Reach, 100BaseT and 1000BaseT interfaces. Any wire can be set to an open circuit, shorts can be applied across the wire pair, or to the adjacent pair. Fault connections can be made to one of four external signals via two fault buses, typically simulating connections to a supply voltage or ground. Each fault bus is capable of carrying 2A allowing multiple channels to be connected to the same fault condition. Additionally, each fault bus features a changeover relay to allow the user to connect alternative fault conditions to the fault buses.

Product Home Contact/Sales Distributors/Reps Datasheet Company Catalog Share Add To List

PXI/PXIe MIL-STD-1553 Multiplexer, Single 16-Channel, 2-Pole

40-739-001 - Pickering Interfaces Ltd.

The 40-739-001 (PXI) and 42-739-001 (PXIe) modules are single 16-channel 2-pole multiplexers designed specifically for physical layer multiplexing or demultiplexing differential signals that conform to the MIL-STD-1553 specification. These modules can be supplied as a single or dual 16-channel 2-pole multiplexer with each signal pair having a controlled 78 Ohm differential impedance.

Product Home Contact/Sales Distributors/Reps Datasheet Company Catalog Share Add To List

PXI/PXIe MIL-STD-1553 Multiplexer, Single 16-Channel, 2-Pole

42-739-001 - Pickering Interfaces Ltd.

The modules are ideal for the testing of multiple devices that use a serial communication interface, allowing the test system to select one target device from many. The design is bi-directional to permit use as a multiplexer or de-multiplexer with no impact on performance. The module uses long lifetime electromechanical relays characterized for use in communications systems.

Product Home Contact/Sales Distributors/Reps Datasheet Manual Company Catalog Share Add To List

PXI 8 Trib Daisy Chain Switch 75 Ohm 96 Way

40-792-701 - Pickering Interfaces Ltd.

The 40-792/793 Daisy Chain Switching Module is designed for telecom test applications. It allows production or verification testing of SONET/SDH transmission multiplexers switching 2MBit/s or 1.5MBit/s data. Traffic is sequentially Daisy- Chained through all tributaries (or any selection of tributaries), modules can be cascaded to test any number of tributaries.

Product Home Contact/Sales Distributors/Reps Datasheet Company Catalog Share Add To List

PXI/PXIe MIL-STD-1553 Multiplexer, Single 8-Channel, 2-Pole

40-739-003 - Pickering Interfaces Ltd.

The 40-739-003 (PXI) and 42-739-003 (PXIe) are single 8-channel 2-pole multiplexers designed specifically for physical layer multiplexing or demultiplexing differential signals that conform to the MIL-STD-1553 specification. The module can be supplied as a single or dual 16-channel 2-pole multiplexer with each signal pair having a controlled 78 Ohm differential impedance.

Product Home Contact/Sales Distributors/Reps Datasheet Company Catalog Share Add To List

PXI/PXIe MIL-STD-1553 Multiplexer, Single 8-Channel, 2-Pole

42-739-003 - Pickering Interfaces Ltd.

The 40-739-003 (PXI) and 42-739-003 (PXIe) are single 8-channel 2-pole multiplexers designed specifically for physical layer multiplexing or demultiplexing differential signals that conform to the MIL-STD-1553 specification. The module can be supplied as a single or dual 16-channel 2-pole multiplexer with each signal pair having a controlled 78 Ohm differential impedance.

Product Home Contact/Sales Distributors/Reps Drawing Datasheet Manual Company Catalog Share Add To List

PXI/PXIe MIL-STD-1553 Multiplexer, Dual 8-Channel, 2-Pole

40-739-004 - Pickering Interfaces Ltd.

The 40-739-004 (PXI) and 42-739-004 (PXIe) are dual 8-channel 2-pole multiplexers designed specifically for physical layer multiplexing or demultiplexing differential signals that conform to the MIL-STD-1553 specification. The module can be supplied as a single or dual 16-channel 2-pole multiplexer with each signal pair having a controlled 78 Ohm differential impedance.

Product Home Contact/Sales Distributors/Reps Datasheet Company Catalog Share Add To List

PXI/PXIe MIL-STD-1553 Multiplexer, Dual 8-Channel, 2-Pole

42-739-004 - Pickering Interfaces Ltd.

The 40-739-004 (PXI) and 42-739-004 (PXIe) are dual 8-channel 2-pole multiplexers designed specifically for physical layer multiplexing or demultiplexing differential signals that conform to the MIL-STD-1553 specification. The module can be supplied as a single or dual 16-channel 2-pole multiplexer with each signal pair having a controlled 78 Ohm differential impedance.

Product Home Contact/Sales Distributors/Reps Drawing Datasheet Manual Company Catalog Share Add To List

Ethernet/AFDX/BroadR-Reach PXI Fault Insertion Switch - 8 Channel

40-201-008 - Pickering Interfaces Ltd.

This high bandwidth differential PXI fault insertion module is designed to simulate common faults on high speed two wire communication interfaces such as Ethernet. This module supports 4 or 8-channels of two wire serial connections and can be used for simulating faults on Ethernet, AFDX, BroadR-Reach, 100BaseT and 1000BaseT interfaces. Any wire can be set to an open circuit, shorts can be applied across the wire pair, or to the adjacent pair. Fault connections can be made to one of four external signals via two fault buses, typically simulating connections to a supply voltage or ground. Each fault bus is capable of carrying 2A allowing multiple channels to be connected to the same fault condition. Additionally, each fault bus features a changeover relay to allow the user to connect alternative fault conditions to the fault buses.

Product Home Contact/Sales Distributors/Reps Datasheet Datasheet Company Catalog Share Add To List

CAN/FlexRay/Differential Bus PXI Fault Insertion Switch - 8 Channel

40-200-008 - Pickering Interfaces Ltd.

This PXI Fault Insertion module is designed to simulate common faults on two wire communication interfaces such as CAN Bus. This module supports 4 or 8-channels of two wire serial interfaces. Each channel can simulate an open fault in either or both wires, a short between both wires or a short to one of eight externally applied fault connections, such as a battery connection or ground, via four fault buses. Each channel can support up to 0.3A and is rated to handle up to 100V between the wire pairs. The wire pairs have controlled transmission line impedance suited to most differential pair signalling systems, including fast CAN Bus interfaces and RS232. Each fault bus is capable of carrying 2A allowing multiple channels to be connected to the same fault condition. Additionally, each fault bus features a changeover relay to allow the user to connect alternative fault conditions to the fault buses.

Product Home Contact/Sales Distributors/Reps Datasheet Company Catalog Share Add To List

PXI 16 Trib Daisy Chain Switch Balanced 96 W

Relay

Subcomponents

Topics