DELTA V - Fault Location for Underground LV Cables DELTA V is a portable system for the accurate location of intermittent and permanent faults on complex low voltage (LV) power distribution networks. The system uses a number of small transient recorders (nodes) to record the voltage drop across the network under fault conditions and a handset to gather and analyse the fault data.

AT-3500 - Underground Cable / Pipe Locator System Keep productivity high and operational costs low, with the AT-3500. It's the rugged, economical solution for locating underground energized and de-energized wires, cables and pipes. Great for parking lot and airport lighting applications, it precisely pinpoints buried services, with exceptionally fast sound and meter response. The backlight multiple-segment bar-graph digital display plus audible indicators show and tell.

NF-816 - Underground Wire Locator & Underground Cable Locator The Underground Wire Locator is designed to locate the path of non-energized wires behind walls and underground. The 816 is also capable of locating a specific circuit breaker, pinpointing wires before drilling and verifying dig sites underground. The effective range is up to 3 feet deep and up to 1000 feet in length.

EG-3000 & EG-3000T - UNDERGROUND CABLE FAULT LOCATOR The EG-3000 is the culmination of 20 years of fault locator development based upon field experience. It is a complete system, employing the most effective fault location electronics, plus many features for safety and operational convenience. Most outstanding of these is the system's Automatic Cable-Saving Voltage Control.

CableTroll 2440 - Fault passage indicator for underground 6-36 [kV] cable networks CableTroll 2440 is designed for mounting in the front panel of Ring Main Units and on single core cables. The indicator detects and indicates Earth Faults and short circuits in underground cable networks.

EZiDIG Sensor - Detect Buried Service Cables The EZiDIG sensor provides a unique ‘protection zone’ around the excavator bucket detecting buried services beneath.

AT-5005 - Professional Underground Cable and Pipe Locator System Locates underground energized and de-energized wires, cables and pipes, eliminates exploratory digging in parking lots or under floors for buried pipes and wires. New technology makes tracing much faster, accurate and unambiguous when compared to standard locators. Three testing modes for best accuracy. Includes receiver (R-5000), transmitter (T-5000), connection cable, ground stake, ground cable, and carrying case and A-Frame.

PD2000 - ntelligent Buried Cable&Pipe locator Left / Right arrow indicate cable route tracing ?Right/Wrong indication: ?detect the power-on cable directly ?Intelligent clamp detecting,to show right/wrong directly ?Easy radiation detecting ?Intelligent pinpoint sheath fault fault locating,pinpointing

Spitfire Buried "Low Voltage" Cable Fault Locator Using the SPITFIRE to locate a faulted cable from a customers meter socket, there is no need to completely disconnect the secondary service from the transformer. After the operator identifies the faulted cable, even though the faulted cable is energized, the SPITFIRE can be connected to pinpoint the fault.

656902 - Split-box Pipe and Cable Locator The Split-box Pipe and Cable Locator is a hand-held instrument in the classic split-box design, consisting of a transmitter and a receiver. The instrument traces underground conductive networks such as water and gas mains, telephone, cable TV, and electric power cables. It determines buried lines depth and locates underground metallic masses such as valve caps and manhole covers.
Designed with patented super-inductive technology, the Split-box Pipe and Cable Locator is lightweight, portable, and easy to use. For easy transport, the instrument and accessories are supplied with a protective tote bag.

656601 - Energized Cable Route Tracer • Lightweight, battery-operated
• Locates, traces and measures depth of buried power cables
• Two sensitivity ranges

The Cable Route Tracer is designed to locate, trace and measure the depth of buried energized power cables. The heart of the instrument is a compact, all-steel control box. It is attached to a precision-wound, swivel-mounted detecting coil that operates from three basic positions:

• Horizontal: for maximum deflection over the cable
• Vertical: for a null over the cable
• 45° angle: for a null at a horizontal distance from the cable that is equivalent to the cable depth

T-1020(8RL) - Surge generator • Suitable for fault location in L.T. to 11 K.V.. • High voltage testing up to 20 KVDC. • Limited Burning Capability. • 800J Energy on 5, 10, 20 KV Range. • Inbuilt Reflectometer T-510 with Laptop for taking distance to the fault. • Inbuilt ARC Reflection Filter. • Built in ICM & Decay Coupler for Reflectometer T-510. • Motorized Mode Selection. • Suitable as thumper required for pinpointing of fault. • Compact design. • Suitable to operate on mains (220-230/240 VAC, 45 Hz up to 60 Hz) or portable generator. •Instrument has been primarily designed to produce high voltage surges for pre-location of under ground cable fault in combination with Reflectometer T-510 with LAPTOP. •The surges produced help in pinpointing the fault and tracing the route of the cable when used with acoustic DIGIPOINT surge generator generates D.C. high voltage for pressure testing of the underground cables to find out faulty phase and the breakdown voltage with leakage current.

DTS C/GUARD - Cable Distributed Temperature Sensors A distributed temperature sensor (DTS) monitor for underground cables.

InterFlex 130 - Time Domain Reflectometers The InterFlex 130 can be used by all utility companies to determine the location of cable faults in energy and control cables (underground cables and overhead lines).

T-1016(5RL) - Surge Generator ? Suitable for fault location in 440V to 11 KV Cables. ? High voltage testing up to 16 KV DC. ? Limited Burning Capability. ? 500 JOULES Energy on 4, 8, 16 KV Range. ? Inbuilt Reflectometer T-510 with LAPTOP for taking distance to the fault. ? Built in ARC Reflection Filter. ? Motorized Mode Selection. ? Suitable as thumper required for pinpointing of fault. ? Compact small design, light weight. ? Suitable to operate on mains (220-230/240 VAC, 45Hz up to 60 Hz) or portable generator. ?Instrument has been primarily designed to produce high voltage surges for pre-location of under ground cable fault in combination with Reflectometer T-510.

OptaSense - Buried Fibre Locator OptaSense product suite provides Telecom companies with the ability to both establish the precise location and path of existing buried fibre and identify when buried cables are in danger of being accidentally damaged due to mechanical digger activity.

The Pinpointer - Unshielded Secondary Cable Fault Locator The Pinpointer locates secondary cable faults in direct buried unshielded cables to within inches of the fault, even under snow or frozen ground, at street light circuits, at the meter riser, across driveways, sidewalks or streets. You don't even have to know the exact route of the cable.

Impulse Phaser Cable Identification System & Cable Phasing System With the introduction of direct buried, solid dielectric primary voltage cables, the IMPULSE PHASER has come into greater prominence for safely and accurately identifying buried primary cables, including jacketed neutral designs. The IMPULSE PHASER has been accurately used on paper insulated, lead covered feeders in excess of 20 miles and even on submarine cable 300 feet underwater.

SLE90 - Surge Wave Receiver While pin pointing faults in underground cables, a surge generator in the timing mode is made to dissipate high voltage energy surges into the cable. The resultant breakdown gives rise to magnetic signals throughout the route of cable and acoustic signals around the point of fault.

3M™ Dynatel™ 2273 - Cable/Fault Locators With over 30 years of experience in positioning, positioning the 17 areas of routing patent, 3M introduces you to a world leading positioning technology of underground equipment. 3M ™ Dynatel ™ 2273 series Cable/Fault Locators and identify the device based on microprocessor, the integration of advanced digital signal processing technology, can quickly and efficiently determine the direction and depth of underground cables, and for the major operators of the pipeline route than in the past Find and fault location experience.

1665 - ARC Reflection Radars Easy to operate digital T.D.R.s for locating faults in buried primary power cable. Compatible with most "arc reflection" systems. Capture and display thumper generated waveform of fault breakdown.

TW-6 - Split box line tracer The TW-6 is single frequency "split box" line tracer and has a long history of successfully locating pipes and cables. When mounted on its 3 piece handle, it can conduct blind searches of an area to locate an underground pipe or cable when the starting point is unknown.

SE-107 - Ground-Fault Ground-Check Monitor The SE-105/SE-107 is an excellent choice for trailing cables 5 kV and under in underground mining applications. For higher voltages or long-cable applications, see the SE-134C/SE-135.