PXI Switching

The P580 is a double width 3U PXI module that functions as a multiplexer. The P580 incorporates two independent differential analog paths that can be connected to any of 34 differential signal paths through the 68-position front panel mounted SCSI connector. Also, each path can be routed to any of the four SMB front panel mounted connectors.Sw ...more

A range of ultra high density 3U matrix module brics available in 4 or 8 slot PXI sizes using high reliability Pickering Ruthenium Reed Relays. Bric family of switching capability is available in 4416 or 2880 crosspoints up to 10 Watts, 2212 crosspoints up to 20 Watts and 1600 crosspoints up to 60 Watts. This high level of switching density al ...more

The 60-100 and 60-101 chassis are fully compliant with Functional Class C of the LXI standard. They allow 3U PXI switching modules to be supported in a LXI compliant environment ...more

Provides 16 independent latching DPST switches configured as a 4x4 matrix. These two wire switches have maskable interrupts that occur when the requested relay movements have been made. The module also has a FIFO for storing up to eight relay operations. This module is useful when instrument matrix switching is needed in your system. This unit als ...more

Ascor's new line of CompactPCI and PXI switch modules offer the performance that rival even our 3000 Series modules. The 7000 Series product line offers the same high quality, low noise designs for both the PXI user and the CompactPCI user. The 7000 Series switch modules fit in industry standard PXI chassis. ...more

The range of available PXI-based relay modules starts at a power relay module with a switching current of 5 A and extends up to modules for matrix applications. The relay modules can be used in CompactPCI- or PXI-based functional test systems. They are also easily integrated in single applications that require signal switching and connection. ...more

The GX6325 is a general purpose switching card with 75 Form-C relays (SPDT) capable of switching 2A @ 220VDC. Connections to this 6U PXI card are made via three DB-78 high-density connectors. ...more

The GX6201 is a 3U PXI Microwave switching card with 1x4 unterminated switching configuration. The GX6201 can be used in PXI test systems where a high-bandwidth switching path is required. ...more

The GX6202 is a 3U PXI Microwave switching card with 1x4 terminated switching configuration. The GX6202 can be used in PXI test systems where a high-bandwidth switching path is required. ...more

The GX6203 is a 3U PXI Microwave switching card with 2 SPDT unterminated switching channels. The GX6203 can be used in PXI test systems where a high-bandwidth switching path is required. ...more

The GX6338 is a 114 channel relay card that plugs directly into any 6U PXI slot. The GX6338 has 114 Form-A relays and is ideal for high-density switching applications. ...more

8/16-CH 16-Bit Analog Output Modules ...more

The GX6062 is a high-density 6U PXI RF switching card that provides 200MHz bandwidth and multiple switching configurations. The GX6062 has 12 groups of 1x4 differential, non-terminated RF multiplexers.  ...more

The GX6315 is a high-density, high-current 6U PXI switching card with 45 Form C switching channels and 9 drivers for external relays. The switching channels are capable of switching 7.5 A per channel, and the relay drivers are capable of sinking 500 mA per driver. ...more

Model 1260-1118, a PXI SPST switch, is an innovative seamless integration of an off-the-shelf Adapt-a-Switch SPST Switching Module on a Racal Instruments PXI carrier. The module installs in any PXI/cPCI chassis without the need for user supplied software or hardware to install or operate.  ...more

High-density matrix built to serve high-channel-count switching application ...more

Pickerings 40-618 Source Switching Module consists of 12 separate 4-channel multiplexers and 44 uncommitted SPST relay contacts in a single width PXI module. Typical applications include signal routing for avionics test systems that conform to the ARINC 608A specification ...more

The 40-515/516/517 2 Amp, 2-Pole Matrix Modules form part of the System 40 PXI Programmable Switching system. Each module consists of a matrix of 64 2-pole electromechanical relays under the control of a PXI/PCI interface. ...more

Pickering Interfaces have a range of power switching PXI cards, available in relay, matrix or multiplexer configurations. Connections are made via a front panel 37 or 50 Way D-Type male connectors. ...more

The 40-560/561/562/565 PXI BRIC is a range of ultra high density matrix modules. These modules are available in 4 or 8 slot PXI sizes to suit all high performance PXI Matrix requirements, constructed using instrumentation quality reed relays for maximum switching confidence. ...more

The 40-515/516/517 2 Amp, 2-Pole Matrix Modules form part of the System 40 PXI Programmable Switching system. Each module consists of a matrix of 64 2-pole electromechanical relays under the control of a PXI/PCI interface. ...more

Pickering Interfaces have a range of power switching PXI cards, available in relay, matrix or multiplexer configurations. Model 40-160-001 has a choice of 10 x SPST or 10 x DPST Power Relays, suitable for switching inductive/capacitive loads up to 10A at 250Va.c. ...more

The 40-876 is a 50Ω 4 to 1 RF MUX available with 1, 2 or 4 banks in a single PXI slot. Additionally, extra switching allows the common connection to be terminated into 50Ω, maintaining signal integrity. All versions exhibit low insertion loss and VSWR through the use of modern RF relay technology at an affordable cost. Each MUX has b ...more

The Model KPXI-RDI-8-16 combines eight general purpose relay outputs with 16 isolated digital inputs. This module can be used to handle a variety of AC and DC signals with improved reliability. The eight relays are rated to 120VAC or 24VDC to include a variety of power switching applications ...more

Switching is an undeniably crucial aspect of system design. Choosing a poor switch product can compromise the signal integrity of the system, severely crippling its performance. It is important to select the highest quality switch modules to ensure that your system is performing at its best. Giga-tronics switching makes certain that your syste ...more