Optical Components

ESV-304 is a cost-effective AOI system, with either one or two CCD color cameras. The duel camera version uses two different resolutions (16mm and 8mm), so the ESV-304 can magnify small features when needed, yet speed through areas with larger components and pitches. The ESV-304 can inspect for missing, reversed, upside down, skew, tombstone, billb ...more

The LaserVision system is designed to test insertion and soldering. This covers both the conventional assembly of components with leads (THT) as well as SMD technology. Production faults such as missing or wrongly inserted components, dry joints and shorts can be detected reliably without much programming effort. ...more

Optical Frequency Domain Reflectometry offers near-zero dead zone fault isolation and analysis for optical components and subsystems. With up to 20 micron resolution or up to 70 meter device length, complete backplanes and subsystems can be investigated for device errors before system integration. ...more

Assembly by our experienced optical technicians Precision bonding capability Autocollimator alignment verification Interferometric testing of assembled optical components Class 10,000 Clean Room assembly Receive complete, ready to install assemblies Save time and money ...more

The DSA8200 Series Sampling Oscilloscope, when configured with one or more optical sampling modules, provide complete optical test solutions for Telecom (125 Mb/s to 43.018 Gb/s) or Datacom (Fibre Channel, Gigabit Ethernet, 10 GbE and InfiniBand) applications, as well as general purpose optical component testing. ...more

DiCon's MEMS 1xN Optical Switch Module is based on DiCon's MEMS 1x8 and 1x4 Optical Switch components. Up to five of the MEMS 1x8 switch components can be configured to provide a compact 1x36 switch. Each MEMS switch component is based on a micro-electro-mechanical system (MEMS) chip. ...more

The MULTI CATS - 2001 delivers a complete test solution in a single rugged bench instrument. The Multi CATS can test various optical components at different wavelengths. ...more

Ultra-high resolution OTDR with backscatter-level sensitivity designed for component- and module-level reflectometry. The OBR uses swept-wavelength coherent interferometry to measure minute reflections (< 0.0003 parts per billion) in an optical system as a function of length with spatial resolution less than 50 microns. ...more

The A2000 is a compact high-speed Component Analyzer which provides characterization of optical components and (sub-)systems regarding: Differential Group Delay (DGD) / Polarization Mode Dispersion (PMD), Polarization Dependent Loss (PDL) , Spectral Loss. ...more

ZYGO's GPI family of interferometers are the industry standard for noncontact measurement of flat or spherical surfaces, and transmitted wavefront measurement of optical components and assemblies. When combined with ZYGO's proprietary MetroPro software, the GPI systems offer a wide range of operational features and data analysis tools for unma ...more

DiCon's Optical Service Channel WDM multiplexes 1310 nm, 1480 nm, 1510 nm, or 1625 nm telemetry signals in dense WDM networks. The component uses a thin film filter mounted between a pair of GRIN lens collimators. The Optical Service Channel Filter WDM is housed in a compact, environmentally stable package that offers superior resistance to hu ...more

OBR MODEL 4400) The OBR 4400 takes the industrys first ultra-high resolution OTDR with backscatter-level sensitivity designed for component- and module-level reflectometry to the next level. With a small, easily transportable platform, the capability to see reflections out to 2 kilometers with no dead zone, and integrated temperature and strai ...more

tool that minimizes capital outlay by providing cost-effective integration of existing equipment into this single-scan, self-calibrating system. Luna's OVA-EL completely characterizes passive optical components and assemblies with breakthrough speed, all with a single sweep of an external tunable laser source. ...more

The TR-7100 is an automatic, optical Inspection System for recognising component and solder faults prior and after the Reflow-Solder Process. The patented illumination process with approx.  ...more

Two of our three X-ray systems in use, the larger system is used for multi-layer board inspection and can handle panels and boards up to 24" x 24"; it is used to detect cracks, voids, misregistration, delamination, etc. The smaller X-ray is used for microfocus applications and features a 360 degree turntable, zoom, and tilt. It is pr ...more

Acton optical coatings for 122nm - 1100nm can be provided on standard optical substrates as complete optical components shown or on customer specified or Customer Supplied Material (CSM). ...more

Optical manufacturing solutions combine Luna?s industry leading test equipment with fiber optic switching capabilities and custom software development for turnkey test stands that meet your high throughput manufacturing needs. Using the Optical Vector Analyzer (OVA), you can create multi-port measurements of dispersion and loss with greater th ...more

Variable Attenuator Patchcord(VAPC),Pigtail(VAPT),Connector(VACN),This part combines the functions of a connector with a Variable Attenuator, with a patchcord, Available as either a component or incorporated into jumper cable. High resolution of 0.01dB is attained by a finely threaded self-locking mechanism.  ...more

Scienscope video measurement systems are specifically designed for non-contact measurement and inspection of small, delicate, or complex components. They are the next generation of traditional measuring measuring microscopes and optical comparator. We have a variety of models to best fit your needs. ...more

An example of a Cercis custom tester included four user-selectable lengths of fiber and large input and output collimators.  A USB interface allowed for computer or remote control, as well as manual length selection from the front panel  A red visible laser was provided  for alignment of the collimators; and also used for optica ...more

The the LD 8900HDR Far-Field Profiler uses goniometric methodology to measure true 3-dimensional profiles of optical components with up to 93 dB dynamic range. All measurements are taken with the emitting fiber, planar waveguide, laser diode or LED inserted directly into the center of the instrument's radial measurement area. For optical fiber, ...more

FIBERPRO's Passive Component Analyzer (CA3000) is designed to analyze loss characteristics of Multi-channel Optical Fiber Components. Working with external Tunable Laser, FIBERPRO's PCA can measure Polarization Dependent Loss (PDL) and Insertion Loss (IL) accurately at the same time at minimum time. ...more

The stack type actuators of the series PA / T based on the standard PA series. Special featur is the outside threading of M14 to mount the actuator. It also helps to adjust the position precisely. These actuators are mechanically pre-loaded to make them ideal for dynamical applications. ...more

NTS is a leading engineering solutions provider in the Fiber Optic industry. NTS is equipped to test optical fiber, cable and active/passive components and systems. At NTS we test against a variety of specifications including those from (Telcordia, Military, TIA/EIA, and ISO). We also perform customized test programs against specifications or ...more

FBERPRO's EI 8000 is an enhanced version of the Michelson or the Mach-Zehnder interferometer with fiber-optic components which makes the understanding of the principle of fiber optic interferometer quite easy. EI 8000 enables one to have clear comprehension right from the basic principle to advanced application without any troublesome optical devic ...more