Logic Analyzers

The LogicPort offers 34 sampled channels for under $400! With full-width sample rates to 500MHz, LogicPort fills the void between expensive analyzers with many channels, and inexpensive analyzers with few channels or limited sample rates. The LogicPort is USB 1.1 and 2.0 compatible and includes CAN, I2C, SPI and RS232 interpreters. ...more

The La-Logic-16 is a sophisticated PC-based logic analyzer. It captures at a maximum of 200Mhz on its 16 channels simultaneously into it?s deep 1M samples/channel buffer.It can also operate as a 16-channel pattern generator.It connects to the PC via the USB-port and does not require any external power. The package is complete with all accessor ...more

The Annie-USB is an 8-channel PC-based logic analyzer with probably the highest specifications in its class. It can capture data at a maximum rate of 500MHz and has a buffer depth of up to 1 Mega-samples per channel. The Annie-USB can also be used as an 8-bit pattern generator! ...more

A maximum sampling rate of 1 GHz is available on all channels. The LA-Gold-36 has a large data buffer of 1 Mega samples per channel for sampling rates of up to 500 MHz on all 32 channels. The large buffer allows long capture times at high sampling rates. The digital logger function is for capturing very slow varying signals, e.g. room temperat ...more

On 09 October 2007, Acute Technology Inc. announced its latest product, the TravelLogic (TL2X36) series logic analyzer in the Taitronics Autumn Show (October 09-13, 2007) Taipei, Taiwan. 36 channels, 4 GHz timing, 200 MHz state, and UART, I2C, I2S, SPI H/W trigger. It can also stack with Acute's DS-1000 series or other manufacturers' digital s ...more

The TravelLogic Series of Logic Analyzers are small enough to fit into your shirt pocket, yet are truly sophisticated logic analyzers, capable of 4 GHz timing analysis, or 200 MHz state analysis, with up to 72 Mb total stackable memory for the 36 channels. They plug into a PC or Laptop USB port making them ideal for the field service technicia ...more

A maximum sampling rate of 1 GHz is available on all channels. The LA-Gold-16 has a large data buffer of 1 Mega samples per channel for sampling rates of up to 500 MHz on all 16 channels. The large buffer allows long capture times at high sampling rates. The digital logger function is for capturing very slow varying signals, e.g. room temperat ...more

Accurately analyze, validate and debug digital signals using Global?s new 32-channel logic analyzer. This value-priced instrument performs like those of its higher priced competitors. Operate as a stand-alone unit or connect to the computer via USB interface. The Model 3600 also includes current limit and over voltage protection. Unit comes complet ...more

The TravelLogic Series of Logic Analyzers are small enough to fit into your shirt pocket, yet are truly sophisticated logic analyzers, capable of 4 GHz timing analysis, or 200 MHz state analysis, with up to 72 Mb total stackable memory for the 36 channels. They plug into a PC or Laptop USB port making them ideal for the field service technicia ...more

On 09 October 2007, Acute Technology Inc. announced its latest product, the TravelLogic (TL2X36) series logic analyzer in the Taitronics Autumn Show (October 09-13, 2007) Taipei, Taiwan. 36 channels, 4 GHz timing, 200 MHz state, and UART, I2C, I2S, SPI H/W trigger. It can also stack with Acute's DS-1000 series or other manufacturers' digital s ...more

Wave Wizard generates a test program according to device spec. It avoids the inherent problems that exist when trying to force an event-driven simulation into a constrained ATE test program, by considering device perspective.  ...more

The Annie-USB is an 8-channel PC-based logic analyzer with probably the highest specifications in its class. It can capture data at a maximum rate of 500MHz and has a buffer depth of up to 1 Mega-samples per channel. ...more

IP-Debug-Bus is a specialized extender card which is optimized for testing IP Modules. The bus signals are all accessible via test points. The testpoints include multiple ground locations and .025 sq. posts for ease of connection to your logic analyzer or scope. The testpoints are labeled for easy identification ...more

PC-based instruments use the power and interface of a computer without the bulkiness and cost of traditional bench top equipment. ...more

HTFLEX33 is a clamp for AC current 1000/3000A which use the Rogowski principle. This model can be used to measure current used in conjunction with oscilloscopes, recorders, network analyzer or multimeters with high accuracy. Particularity of HTFLEX33 is the missed of any external control logic which permits easy e simply measurements without t ...more

The X-COM NTDS Protocol Analyzer System reaches a new level of protocol analysis capability by providing insight into protocol, error, timing, and waveform analysis. The system includes an X-COM NTDS Type E Protocol Interface Module, a Tektronix TLA5000 Series Logic Analyzer, two TLA P6434 Probes, and custom disassembler software. ...more

The BG2000 POS PHY / SPI3 / Utopia Level 1/2/3 Tester is the perfect tool, specifically designed to enable testing of the Utopia and POS PHY / SPI3 interfaces in their development phase. A newly integrated Logic Analyzer enables the validation of the handshake without the need for additional cabling. ...more

The La-Logic-16 is a sophisticated PC-based logic analyzer. It captures at a maximum of 200Mhz on its 16 channels simultaneously into it’s deep 1M samples/channel buffer. It can also operate as a 16-channel pattern generator. It connects to the PC via the USB-port and does not require any external power. The package is complete with all acce ...more

The ORTEC Model 416A Gate and Delay Generator accepts either polarity of input logic pulse, provides a delay of up to 110 µs, and furnishes an output logic pulse with selected amplitude, polarity, and width. The combination of functions provided by this module satisfies various logic requirements, such as gating multichannel analyzers and alig ...more

GateVision PRO is the third generation of graphical netlist analyzers from Concept Engineering. Completely rewritten to run on modern 32/64bit platforms, GateVision PRO provides the designer of even the largest chips with intuitive design navigation, schematic viewing, logic cone extraction and interactive logic cone viewing for debug support and d ...more

The Jobmatch Systems / Janatek Logic-3p is small enough to fit into your shirt pocket, yet it is a sophisticated logic analyzer, capable of capturing data at 200 MHz on its sixteen channels simultaneously. ...more

PrintCapture is essentailly a Windows-based software printer/plotter. Although PrintCapture was designed to replace the printer or plotter normally used with test equipment, such as oscilloscopes, logic analyzers, and spectrum analyzers, it has also been used in applications that we never envisioned or even knew about. Customers are now using P ...more

The LA-Gold-36 is a high performance logic analyzer with an integrated pattern generator. It was designed to be of superior technical quality to ensure measurements of excellent signal integrity. With class-leading specifications, it offers a comprehensive digital debugging environment for the electronics professional ...more

The ELAB-080 is an integrated instrumentation package that uses the power of modern PCs to provide powerful test and measurement features at a very affordable price. The ELAB-080 package comes complete and ready to use with the instrument, power supply, two oscilloscope probes, logic analyzer and AWG cabling, software, and a USB cable. All you need ...more

The comprehensive software provides a friendly and easily manageable environment for the wide spectrum of features. You can start meaningful measurements almost immediately after installing the software for the first time. Setting a trigger condition, capturing and navigating through the data, is a pleasure. The data may be viewed, saved and printe ...more