Linear Power Amplifiers

The NPRT 2200 performs Noise Power Ratio measurements to determine the dynamic range of optical transmitters, amplifiers and other active devices used in HFC networks. It has an internal broadband noise source, selectable filters and a measuring receiver. ...more

SKY77152 PAM, a fully matched surface mount module for WCDMA, packs full coverage of the 19201980 MHz bandwidth into a single compact package. It meets stringent spectral linearity requirements of WCDMA transmission with high PAE and improves efficiency for the low RF power range. The single GaAs MMIC contains all active circuitry, includ ...more

The CX65003 PA driver offers a desirable combination of features that provide superb performance and ease of use in a low-cost SMT package. This GaAs HBT PA driver was developed and optimized for extreme linear performance in a variety of applications. It is ideal as a driver or output stage in transceivers and repeaters for WCDMA and CDMA2000 ...more

The AV-112AH-PS is a high-power, variable-gain, high-voltage linear amplifier that accepts inputs of 0 to +/- 2 Volts, and amplifies the signal up to as much as +/- 200V, for operation into load impedances of 1.2 kilohms or higher. The amplifier bandwidth is 300 kHz. ...more

SKY77149 System Smart PAM, a fully matched module for CDMA / PCS applications, meets stringent spectral linearity requirements of CDMA PCS and maintains high PAE for power output up to 28 dBm. A single GaAs MMIC contains all on-board bias circuitry and input and interstage matching circuits. Output match, realized off-chip within the module pa ...more

BL Series amplifiers are highly reliable linear brushless servo amplifiers that are easily adaptable to drive brush or brushless servomotors. The BL amplifier package is a complete modular unit that includes heat sink, metal cover, control, and bus power supplies that operate at ±40 VDC (@ 10 or 20 amps peak) or ±80 VDC (@ 10 amps peak). ...more

The CX65100 3.4 V, linear PA is optimized for superior performance over the 700 to 1000 MHz frequency range, making it suitable for a variety of applications including cellular, GSM, CDMA, mobile and paging base stations, and WLL transmitters. Its unique design offers high linearity without sacrificing efficiency. Typical performance features ...more

SKY77148 PAM is a fully matched surface mount module for CDMA2000 handset and WLL applications. with full 450460 MHz bandwidth coverage. It meets the stringent CDMA2000 linearity requirements to and exceeding 29 dBm output power. Output match, realized off-chip within the package, optimizes efficiency and power performance into a 50 ohms ...more

The CX65002 PA driver offers a desirable combination of features that provide superb performance and ease of use in a low-cost SMT package. The GaAs HBT PA driver was developed and optimized for extreme linear performance in a variety of applications. It is ideal as a driver or output stage in transceivers and repeaters for AMPS/CDMA/TDMA/GSM ...more

The CX65104 5 V PA is optimized for high power, gain, and linearity over the 700 to 1000 MHz frequency range. The CX65104 is well suited as a linear driver for cellular, GSM, CDMA, mobile and paging base stations, as well as WLL transmitters. Typical performance includes a P1dB (CW) of 31 dBm at 29 dB gain, with an output IP3 of 42 dBm and eff ...more

The CX65001 PA driver offers a desirable combination of features that provide superb performance and ease of use in a low-cost SMT package. This GaAs HBT PA driver was developed and optimized for extreme linear performance in a variety of applications. It is ideal as a driver or output stage for transceivers and repeaters for TETRA transceiver ...more

The AV-112C-PS is a high-power, variable-gain, high-voltage linear amplifier that accepts inputs of 0 to +/- 2 Volts, and amplifies the signal up to as much as +/- 90V, for operation into load impedances of 100 Ohms or higher.  ...more

The power-efficient CX65101 PA operates with a 3.4 V supply and is optimized for linear performance over the 1700 to 2200 MHz frequency range. The CX65101 is well suited for transceivers used in PCS, DCS, UMTS, WLL, and ISM applications. The CX65101 is manufactured with Skyworks AlGaAs HBT process, which allows for single supply operation whil ...more

The Ndrive HL family of digital servo amplifiers are capable of driving brushless and DC brush-type servomotors, and stepper motors. They perform both current loop and servo loop closure to assure the highest level of positioning performance and rate stability. They are built on high performance DSPs, which allow them to perform complex calcula ...more

The power-efficient CX65105 PA operates with a 5 V supply and is optimized for linear performance over the 1700 to 2200 MHz frequency range. The CX65105 is well suited for transceivers used in PCS, DCS, UMTS, WLL, and ISM applications. The CX65105 is manufactured with Skyworks AlGaAs HBT process, which allows for single supply operation while ...more

The AP163-317 is a linear, medium power amplifier designed for low voltage operation in 2.42.5 GHz ISM band having linear and high-efficiency performance with 802.11b/g signals. The device is manufactured on advanced InGap HBT process and housed in a 16 Pin 4 x 4 mm micro lead package. Characteristic Value RF Input Power 20 dBm Supply Cur ...more

The AV-112B-PS is a high-power, variable-gain, high-voltage linear amplifier that accepts inputs of 0 to +/- 2 Volts, and amplifies the signal up to as much as +/- 135V, for operation into load impedances of 500 Ohms or higher. The amplifier bandwidth is 50 kHz. ...more

The SKY65004 is a high performance, ultra-wideband amplifier with superior output power, linearity, and efficiency. The device uses low-cost, Surface-Mount Technology in the form of an SOT package, which allows for a highly manufacturable low-cost solution. The high linearity and superior ACPR/ACLR performance of the SKY65004 make it ideal for ...more

The AP172-317 is a linear high gain, medium power amplifier designed for low voltage operation in 2.42.5 GHz band having linear and high-efficiency performance with 802.11b/g signals and built-in level detection circuit. The device is manufactured on advanced InGap HBT process and housed in a 16 Pin 4 x 4 mm micro lead package ...more

The RS23301 HBT power amplifier is part of the Skyworks PHS chipset, which also includes the RS21101 baseband processor, RS21501 IF transceiver, and RS23603 RF transceiver. The RS23301 typically consumes 130 mA at 3.4 V and provides an unconditionally stable design that removes the need to follow the PA with an RF isolator. The RS23301 offers ...more

The AV-112A-PS is a high-power, variable-gain, high-voltage linear amplifier that accepts inputs of 0 to +/- 2 Volts, and amplifies the signal up to as much as +/- 200V, for operation into load impedances of 5 kilohms or higher.  ...more

The Model 150A220 is a completely solid-state, linear broadband amplifier for laboratory applications requiring instantaneous bandwidth, high gain and moderate power.  ...more

The Model 250W1000A is a portable, self-contained, air-cooled, broadband, completely solid-state amplifier designed for applications where instantaneous bandwidth, high gain and linearity are required. Push-pull circuitry is utilized in all high power stages in the interest of lowering distortion and improving stability. ...more

Series AM cellular amplifiers are available for operating frequencies from 800 to 3000 MHz and output power from 10 to 50 W at 1 dB compression. Their design utilizes the most advanced state-of-the-art technologies in RF/microwave power, including combination techniques and component selection of FET and bipolar transistors. ...more

The Model 10000LP is a broadband amplifier designed for applications requiring instantaneous bandwidth, high gain, and linear, high power pulse output. ...more