Instrument Systems

Provides 16 independent latching DPST switches configured as a 4x4 matrix. These two wire switches have maskable interrupts that occur when the requested relay movements have been made. The module also has a FIFO for storing up to eight relay operations. This module is useful when instrument matrix switching is needed in your system. This unit als ...more

The PX413S provides 16 independent latching DPST switches configured as a dual 8x1 multiplexers or a single 16x1 multiplexer. These two wire switches have maskable interrupts that occur when the requested relay movements have been made. The module also has a FIFO for storing up to eight relay operations. This module is useful when instrument multip ...more

VPCs Wire Plus program is designed to enable quick and easy custom test system configurations by providing finished system cable solutions in modules; wired, PCB, breadboard and umbilical cords . This eliminates the time and expense of hand-crimping each contact and promotes rapid integration of your Mass InterConnect system with virtually any ...more

The TR122 Transient Recorder is a high performance two channel transient waveform digitizing instrument in a single slot 3U Compact PCI module, capable of digitizing to 12 bits at rates up to 200 MS/s on each channel independently. Each channel includes an independent analog front end and analog-to-digital converter, providing superior interchannel ...more

Complete more installs faster and better using the Super Buddy satellite finder meter. Be "sure of your bird" with the positive ID feature or use the automatic scan to identify the unknown satellite. The Super Buddy's geo-sensitive "Field Guide" shows you just the birds visible to your install -- ALL of them, with their ind ...more

Enable a single technician to perform return band alignment with this easy to use return band alignment system for CATV. This system consists of a headend signal level receiver/telemetry transmitter (the HECTER 6103) and a small, field portable, dual-carrier signal generator/telemetry receiver unit (HECTER'S PUP 6106). ...more

The Model 2790 SourceMeter Switch System is a high voltage, multichannel resistance measurement solution that speeds and simplifies electrical checks of airbag inflators and a variety of other automotive electrical test applications. It is the only commercial instrument that combines all the sourcing, measurement, and signal routing capabiliti ...more

Eagle 2: C125 - Is 4 instruments in 1. Designed to offer advanced system analysis and productivity this kit includes the ground-breaking Eagle 2 Combustion Analyzer. This multi-functional instrument is a combustion analyzer with unmatched simplicity and a unique combination of features to enhance a technician's efficiency and safety. Doubles as a d ...more

C125KIT - Is 4 instruments in 1. Designed to offer advanced system analysis and productivity this kit includes the ground-breaking Eagle 2 Combustion Analyzer. This multi-functional instrument is a superior combustion analyzer with unmatched simplicity and a unique combination of features to enhance a technician's efficiency and safety. ...more

P-Squared for PalmTM and Pocket PC based handheld computers is simple and easy-to-understand. Displays and clears fault codes, runs self-tests, displays freeze frame data, and retrieves PIDs for over 40 different electronic systems (including airbags, ABS, and instrument cluster) on Ford and Lincoln/Mercury vehicles.  ...more

Sensing of energized lines, accurate voltage measurement, and phasing by portable isolated instrumentation has proved practical and reliable on modern underground systems. Specifically designed solid state HV voltmeters and accompanying test and verification devices have proved useful and reliable in conjunction with the capacitance voltage tes ...more

The SI-C33DSP-cPCI from Sheldon Instruments is a powerful Digital Signal Processor (DSP) card for your system equipped with a cPCI/PXI bus. ...more

UPM6200 is a portable analyser to measure the electrical parameters on single-,and three-phase systems, as well as on direct current systems. The instrument performs the continuous sampling of the three phases and record all the information for the network quality evaluation. ...more

The si720 is a high power, high accuracy, high resolution compliment to the Micron optics si425. It provides higher accuracy and resolution than the si425 and can be used for a wide variety of optical sensors. The system provides users with a complete understanding of how the spectral shape of the sensor reacts to varying physical conditions ? ...more

The ELAB-080 is an integrated instrumentation package that uses the power of modern PCs to provide powerful test and measurement features at a very affordable price. The ELAB-080 package comes complete and ready to use with the instrument, power supply, two oscilloscope probes, logic analyzer and AWG cabling, software, and a USB cable. All you need ...more

The Munitions Capable BRAT (McBRAT) tests smart weapons systems. It initiates Built-In-Test (BIT), provides BIT status, and uploads/downloads and verifies applicable software, including mission planning data resident in the smart weapon. McBRAT is designed for operation in harsh flight line environments.  ...more

PMC-AX modules provide users with the capability to implement complex, customized analog I/O solutions.  Application-specific logic routines and algorithms can be downloaded into the on-board reconfigurable FPGA to control operation of the I/O channels. These modules are ideal for high-speed, high-resolution A/D and D/A functions. Typical uses i ...more

Matrix Modules - CPM and PAM provide fundamental flexibility to connect any instruments to any DUT pin. Relay matrixes of both modules are programmable, enabling safe connection of each module (any 8-pin combination) to the six analog instrumentation nodes. Each module is separately addressable, allowing multiple matrix modules per system, and ...more

The most commonly used instrument for the measurement of the optical performance of thin-film coatings is a spectrometer. Using a StellarNet fiber optic spectrometer coupled to a reflectance probe and fiber optic light source, it is possible to measure film thickness by detecting the sinusoidal fringe pattern from the samples specular reflectance. ...more

DIgSILENT GmbH has developed the PowerFactory Monitor fault recording and monitoring system in order to easily and efficiently cope with the special requirements for system test implementation, system performance supervision and the determination of connection characteristics. The PowerFactory Monitor fully integrates with the PowerFactory software ...more

QuVIEW is a real time software accelerator for LabVIEW based on TI's C3x/C6x family of floating point DSPs. QuVIEW is fully compatible with Win98/2000/XP and Linux.  ...more

Instrument Cluster is a dashboard component used in Automobile. The test system developed is a customized ATE for in-process testing of various parameters in the instrument cluster, automatically. The instrument cluster consists of RPM meter, Fuel gauge, Temperature gauge, Oil Pressure gauge, Voltmeter, set of Telltale lamps (indication lamps) ...more

The SR785 Two Channel Dynamic Signal Analyzer is a precision, full-featured signal analyzer that offers state-of-the-art performance and a wide selection of features at a price that's less than half that of competitive analyzers. Building on its predecessor, the SR780, the SR785 incorporates new firmware and hardware that make it the ideal ins ...more

Benchtop Hybrid Test System. This economical system has numerous features that support a wide variety of maintenance, repair, and data acquisition/analysis applications. It features the following high performance instruments: 6 ½ - digit DMM, Universal Counter, Digitizing Oscilloscope, Arbitrary Function Generator, 8x32 Relay Matrix, and a Form C P ...more

TEMPpoint is a series of easy-to-use temperature measurement instruments. Every facet of the instrument has been designed to give the highest accuracy. Each box is a 48-channel stand-alone instrument for connection to a PC via USB or Ethernet (LXI). Each sensor input, either a thermocouple, voltage, or RTD, is plugged directly into a connector ...more