Broadband Antenna

The AS218-000 is a broadband transfer switch designed to combine T/R and antenna diversity switching functions on a single IC. The device is designed to handle high power and maintain high linearity at low control voltages. This low cost switch is ideal for Wi-Fi systems and is capable of covering both the 2.4 and 5 GHz bands. ...more

Skyworks AS236-321 is a broadband DPDT switch designed to combine T/R and antenna diversity switching functions on a single IC. The device is designed to handle high power and maintain high linearity at low control voltages. This low cost switch is ideal for Wi-Fi systems and is capable of covering both the 2.4 GHz and 5 GHz bands. ...more

The SKY13252-321 is a broadband transfer switch designed to combine T/R and antenna diversity switching functions on a single IC. The device is designed to have a low insertion loss and maintain high linearity at low control voltages. This low cost switch is ideal for Wireless LAN applications and is capable of covering both the 2.4 GHz and 5 ...more

Farran Technology produces a complete range of corner cube detectors for use in the submillimeter wavelength region. The corner cube detector consists of a long wire antenna, backed by a corner cube reflector, contacting a low capacitance Schottky barrier diode. This configuration has been recognised as being that providing the most sensitive ...more

These rugged, dependable high gain log periodic antennas give you the constant high intensity fields you need for RFI and EMI testing in and out of a shielded room.  They deliver frequency response and field intensity beyond the norm.   ...more

The Logarithmic Periodic Broadband Antennas VULP 9118 offer a very low SWR in their nominal frequency range and a very broad bandwidth. The gain of typ. 6.5 dBi is nearly constant within the whole nominal frequency range. The gain ripple is typ. less than 1 dB. The 3 dB Half Power beamwidth is 70° in E-Plane and 120° in the H-Plane, the typical SWR ...more

Applications for this uniquely-small antenna include covert and clandestine SIGINT/COMINT, and other monitoring and surveillance where platform space is minimal and low profile operations are essential. The antenna offers superior performance and gain figures across its broadband range of 20-1000 MHz. ...more

Applications for these antennas include point-to-point communications, ground-to-air communications, SIGINT, surveillance and more. Their broadband coverage ranges are from 75 to 300 MHz for the VHF model and 300 MHz to 1200 MHz for the UHF model. These wide coverage ranges, low-noise, and high dynamic range combined with their high gain of 10.0 dB ...more

Applications for these antennas include point-to-point communications, ground-to-air communications, SIGINT, surveillance and more. Their broadband coverage ranges are from 20 to 520 MHz for the VHF model and 500 MHz to 3000 MHz for the UHF model. These wide coverage ranges, low-noise, high dynamic range and excellent directivity characteristics co ...more

AR Microwave horns take microwave coverage to a new level. Our broadband RF and microwave horn antennas are specially designed to compensate for the losses that typically occur in test systems as frequency increases.  ...more

BAE Systems offers several unique broadband horns. These single linear polarization horns are available in bands covering 0.5 to 6.0 GHz, 1.0 to 12.4 GHz, and 2.0 to 18.0 GHz. The units come with individually measured gain data. Recently, dual-polarized horns have been developed with a frequency range of 1.0 to 22.0 GHz in a single unit. ...more

The Broadband Horn antennas BBHA 9120 offer a very low SWR in their nominal frequency range and a very broad bandwidth. The gain increases with frequency up to approx. 18 dBi, depending on the horn's size and shape. The increasing gain with frequency helps to compensate cable losses. The BBHA 9120 series is suitable for both, transmission and recei ...more

Biconical Antennas have dipol like characteristics (e.g. circular directional pattern in the H-plane, "8"-shaped in the E-plane, fixed phase center, comparable gain), with an enourmous wide bandwidth, achieved by the double cone elements. Broadband RX-Antenna for Emission Testing (20-300 MHz) · TX-Antenna for Immunity testing, especially at low f ...more

The Precision Omnidirectional Dipoles POD 16 and POD 618 are fully compliant to CISPR 16-1-4 for site validation above 1 GHz. The POD 16 and POD 618 are precision broadband dipole antennas with conically shaped radiation elements covered by an RF-transparent radome. This rugged construction enables excellent dipole-like radiation pattern up to 18 G ...more

The MC4900PT ceiling mount omnidirectional antenna is designed to cover broadband wireless Public Safety frequencies from 4.9 to 5.9 GHz with a VSWR of less than 2.0:1. ...more

Site validation measurements according to EN 50147-2 and ANSI C63.4. All purposes of broadband precision field-strength measurements. Technical Data for PBA 320. Frequency range: 30 MHz - 200 MHz ...more

 1.6 M ~ 500MHz to direct reading in the frequency field intensity was measured. ROKESHONANARAIZA, broadband radio frequency corresponding to the electric field intensity and frequency of measurement instruments in a variety of antenna performance comparison  ...more

This low profile wideband antenna is ideal for broadband wireless public safety WiMax applications. ...more

EM Eye is a broadband electromagnetic field and RF signal meters that offers a unique combination of features in a miniature and convenient package.As a field strength meter, EM Eye features miniature directional broadband antenna. Please request specific informations.  ...more

 10 M ~ 2500MHz to direct reading in the frequency field intensity was measured. ROKESHONANARAIZA, broadband radio frequency corresponding to the electric field intensity and frequency of measurement instruments in a variety of antenna performance comparison  ...more

Com-Power EMI / EMC broadband and tuned antennas cover the frequency range of 9 kHz - 40 GHz for EMI/EMCTesting. They can be used for both radiated emission and immunity testing (antenna used as a transmitter to generate electromagnetic field). ...more

Com-Power broadband high gain preamplifiers were designed for electromagnetic interference (EMI) testing and certification. EMC test labs use preamplifiers to improve sensitivity of the test system during EMI radiated emissions measurements. Without a high gain preamplifier, signals picked by the antenna that have amplitudes below the noise fl ...more

The wireless broadband omnidirectional antennas are designed to provide maximum performance and reliability under the toughest weather conditions. ...more

NSI offers broadband ridged waveguide probe (RGP) antennas for use as near-field measurement probes. The wide bandwidth of these probes allow replacement of several standard Open Ended Waveguide (OEWG) Probes, eliminating the need to change probes frequently. The probe is delivered with typical measured probe correction data from NSI to serv ...more

The smallest of its class, brand-new EM Eye broadband electromagnetic field and RF signal meters offer a unique combination of features in a miniature and convenient package. As a field strength meter, EM Eye features miniature directional broadband antenna, frequency range of 2MHz to 2GHz, high sensitivity (down to 10mV/m), simultaneous linear ...more