Audio Testers

The SP395 Audio Integrator is a capable, versatile and completely integrated audio analyzer for fast, trouble-Free commercial audio installations. Features: FFT Analyzer, Real-Time Analyzer, Sound Level Meter, LEQ, Sound Study Graph, Energy-Time Graph, Reverb Decay Time (RT60), Impedance Meter, Polarity Tester, Signal Generator, Frequenc ...more

The Qbox is the all-in-one audio line tester ideal for applications such as live sound, maintenance, installation work - anywhere audio runs down a cable. The Qbox can quick-check dynamic microphones and cables without firing up the entire system. It provides a handy mic or line-level tone for activating a signal path or identifying a specific cabl ...more

The Planet Waves Cable Cutter/Tester is the fast and easy helper in constructing your instrument and audio cables. Designed to work with Planet Waves RCA and 1/4” Coaxial Cables,the unit not only cuts cable with ease and accuracy, but also tests for shorts and proper tip and ground connections for 1/4” and RCA cables ...more

One button Automatic Cable Tester.  Plug in the cable you need to test, press the button, and interpret the LED readout.  Tests: RCA, 1/4, 3.5mm, XLR, Speakon, and Banana. ...more

The new L-260 Audio Test Panel replaces the old L-240 panel with a greatly improved layout and easier testing procedures. The old L-240 started life as a tester for the KAA-445 audio controller and was added to or modified over the last 20 years in an effort to keep it current. However, with the newer audio controllers it was due for a complete red ...more

Battery-powered autio impedance tester. Timer function for hand free use. Battery indicator. Measure speaker's impedance. Measure speaker lines (connected to load). Measurement system: constanc current inverter with 1 kHz approx. 2mA ...more

The FC5000 series developed for wide band FM two-way communication test. The Rx Tester can lock automatically and almost instantly on to any FM signal within its frequency range. FM signals are demodulated and output it through its built-in speaker or audio earphone supplied. The high sensitivity to nearfield signals makes the Rx Tester ideal for ...more

This versatile cable tester checks many varieties of audio cables. It tests most cable combinations of XLR, 1/4" or RCA Phono plugs for shorts, opens, and polarity reverse. The handsfree design allows manipulation of the cable to locate intermittents. ...more

Battery-powered audio impedance tester. Timer function for hand free use. Battery indicator. The tester measure with a frequency of 1 kHz. Measure speaker's impedance. Measure speaker lines (connected to load).  ...more

The SPEA C3372AUDIO is the SPEA product for audio application final test. The C3372AUDIO is designed to achieve the fully testing needs of power audio devices without the necessity to have a dedicated tester platform. Further, using the C3372AUDIO resources, the type dependent interface hardware is reduced to the minimum shortening the applica ...more

The CBT-277 cable tester by Hosa is a high-quality junction box with connections for Neutrik Speakon, XLR, 1/4" phone, RCA, and dual banana, along with a comprehensive set of buttons and LED indicators that will not only tell you if a cable is wired incorrectly, but will actually differentiate between shorts, ground faults and phase mis-w ...more

The UCT 21 is very easy to operate. The user picks a test signal from the accompanying track list, plays the signal on an audio CD player or CD ROM player and checks the response of the equipment under test. The left channel of the audio CD player/CDROM player serves as signaling and ringing channel, the right channel as data channel for FSK da ...more

NTI's RT-2X audio analyzer is a telecom tester optimized for high-level voice-band quality end-of-line tests on a production line. The flexible 2-channel architecture and its outstanding speed (typical cycle time < 0.5 s) make RT-2X the ideal solution for comprehensively testing... ...more

The MiniSonic MS20 is a combined oscillator and measuring set in a stand-alone unit, which is both compact and portable. As well as being a quality tester the MS20 is a precision line-up tool, a stereo PPM, a balanced-unbalanced convertor (both ways), a stereo microphone pre-amp, a headphone amp, and a level convertor. ...more

Allows testing of home theater and speaker system for estimate the necessary power in an installation for the suitable election of the amplifier. ...more

This is an LSI test system which support multi-testing. It achieves a high throughput, the fastest in the industry. It is also designed to be low-cost and space-saving. The S210 is more than a simple logic tester, as when optional modules are added, the system can be used in a wide variety of applications such as1 BIT-DAC audio analog tests. ...more

TE-2000 Headset Tester for audio testing headsets and handsets using computer generated test sounds. ...more

The MiniSonic MS1/MS10 Audio Analyser/Studio Aid is a complete, hand held, two-channel analogue audio test set that measures frequency, frequency response, phase, level, noise, distortion, crosstalk, speed and path latency (delay). As well as being a quality tester it's a precision line-up tool, a stereo PPM, a balanced-unbalanced convertor (both w ...more

ULTRA Voice™ is a many-terminal to many-terminal voice system tester ideal for evaluating complex wireless systems such as Project 25 (P25) land mobile radio and cellular push-to-talk (PTT). All calls are analyzed using the ITU P.862 Perceptual Evaluation of Speech Quality (PESQ) objective voice quality algorithm. The PESQ score can be mapped to a ...more

Our portable 3.5" Color LCD CCTV test monitor can troubleshoot CCTV installations. An LCD display easily allows for checking video signal of the CCTV camera. An audio jack tests the audio signal. ...more

Testing range: 12 to 600V AC Find and replace defective bulbs in seconds Bulb tester and extractor Test power outlets Fuse tester Sensitivity adjustable Audio signal and LED indicator Operated by two LR44, 1.5V batteries Easy grip design for safe handling RoHS, UL and cUL approvals ...more

Protecting revenue from CT metering installations is made much easier with the Model 505. It is connected into the 5A or 1A secondary of a CT during a normal meter test, and injects a 1.6kHz audio frequency signal into the secondary superimposed on the 50Hz or 60Hz current. The microprocessor in the 505 computes the admittance of the CT which s ...more

Advanced Hipot Tester with Graphical Touch-Screen Control. 4.1 Mb, Audio and Video, 100 second run time, requires Flash plug-in. oint Labeling: Standard Adapter Labeling or Custom 30 Characters. Components: Resistors, Diodes, Capacitors, Twisted Pairs, Custom ...more

Enables quick convenient continuity cable testing for all types of audio cables. Tests cables with all types of combinations of the following connectors: 1/4" TRS, balanced XLR (M/F), Phono/RCA, banana plug, Speakon™, and 5-pin mini-DIN. ...more

Supports Bluetooth 1.1/1.2/2.0+EDR , Measures the suitability of Bluetooth specifications , Audio performance (SCO Link) Measurement function , RF signal analyzer function , Protocol analyzer function . ...more