AC Programmable Power Supplies

The Genesys family of programmable power supplies sets a new standard for flexible, reliable, AC/DC power systems in OEM, Industrial and Laboratory applications. Now available in half rack configuration at 750W, designated GENH, and with available output voltages from 7.5 to 600V, and current up to 100A. Active PFC, and universal input head a ...more

The Genesys(TM) family of programmable power supplies sets a new standard for flexible, reliable, AC/DC power systems in OEM, Industrial and Laboratory applications. Now available in more power levels (750W, 1.5kW, 3.3kW, 5kW, 10kW and 15kW) and with available output voltages from 7.5 to 600V, and current up to 1,000A. Active PFC, and universal i ...more

This member of the Genesys(TM) product family of programmable switching power supplies provides high power density, low ripple and a complete set of user-friendly interfaces. In addition to high power density, popular worldwide single and three phase inputs are available. This assures operation in difficult AC environments and meets European EM ...more

The Genesys(TM) family of programmable power supplies sets a new standard for flexible, reliable, AC/DC power systems in OEM, Industrial and Laboratory applications. Available in two power levels (750W or 1500W) and with available output voltages from 7.5 to 600V, and current up to 200A. Active PFC, and universal input head a long list of stan ...more

The GenesysTM family of programmable power supplies sets a new standard for flexible, reliable, AC/DC power systems in OEM, Industrial and Laboratory applications. Now available in more power levels (750W, 1.5kW, 3.3kW, 5kW, 10kW and 15kW) and with available output voltages from 7.5 to 600V, and current up to 1,000A. Active PFC, and universal input ...more

AMREL's SPS Series of switch-mode power supplies are designed to provide excellent programming and read-back resolution and accuracy, in a high power density form factor. The SPS Series offers a Front Panel Keypad, GPIB, Ethernet and External Analog controls. Master/Slaving can be set up through the RS485 Interface. Power levels range from 1.2 ...more

Power Supplies of the NGPV series are suitable for use in test systems and for general laboratory applications. The version for use in systems and labs can be programmed via IEC/IEEE bus or operated manually. These power supplies are provided with the necessary operating controls, a digital LED display for indication of all input data includin ...more

The GT7400 is a dual output programmable DC power supply designed for use in the GTXI Instrumentation chassis series. The GT7400 occupies two slots of the GT7700/GTXI-700 and is controlled via the ISA bus. The AC power is provided using a panel mounted receptacle. ...more

Advanced Test System. The VTS-2000 is a fully integrated, turnkey system designed to address your functional testing needs. The standard VTS-2000 test system includes a 10MHz arbitrary Function Generator, 200MHz Universal Counter, 61/2-digit DMM, 250MHz Digitizing Oscilloscope, 8x32 Relay Matrix, 32 Channel Power Switch and 8 programmable DC power ...more

The GT7400 is a dual output programmable DC power supply designed for use in the GTXI Instrumentation chassis series. The GT7400 occupies two slots of the GT7700/GTXI-700 and is controlled via the ISA bus. The AC power is provided using a panel mounted receptacle. The power supplies are fully isolated and can be externally connected in series ...more

POWER SUPPLY TEST SYSTEM. The BRAT B509 is a double rack, stand-alone, high voltage, high power test system utilizing Commercial-Off-The-Shelf (COTS) equipment in a modular design. Its primary use is as Automatic Test Equipment (ATE) for power supplies with a wide range of input and output requirements. . ...more

The EC1000S not only supplies AC and DC power as the ordinary power supply, it also allows free programming of outputs such as instantaneous interruption, voltage sweep, and voltage variation patterns. The EC1000S also has essential functions for power tests, including a variety of output measurements and measurements related to the load power ...more

Programmable Triple Power Supply. Insensitive to RF voltages radiated by device under test or nearby antenna. Simultaneous readout of nominal and actual values of all channels. Coupled protection mode for DUTs which should not be supplied from an asymmetrical voltage source. Software calibration via IEC/IEEE bus without potentiometer adjustmen ...more

Benchtop Hybrid Test System. This economical system has numerous features that support a wide variety of maintenance, repair, and data acquisition/analysis applications. It features the following high performance instruments: 6 ½ - digit DMM, Universal Counter, Digitizing Oscilloscope, Arbitrary Function Generator, 8x32 Relay Matrix, and a Form C P ...more

The GT7400 is a dual output programmable DC power supply designed for use in the GTXI Instrumentation chassis series. The GT7400 occupies two slots of the GT7700/GTXI-700 and is controlled via the ISA bus. The AC power is provided using a panel mounted receptacle. The power supplies are fully isolated and can be externally connected in series ...more

45kvA, 90kVA or 135kVA output power, 2 types of basic and multifunction  Compact and simple design  AC, DC, AC+DC output modes *  Voltage interruption, quick change and sweep  Measurement functions (voltage, current, power, power factor, harmonic analysis *, waveform display *)   Waveform synthesis function *  Immunity test functions ...more

Behlman AC Power Supply/Frequency Converter / Inverter, programmable AC power Source delivers pure, clean, linear power. Models provide from 250VA to 9 KVA of power at output frequencies from 45 to 10,000 Hz. The ACP Series combines highly advanced magnetics with solid state circuitry and computer programmability, IEEE488 Interface included.&n ...more

150, 300 W, Bench, Programmable System DC power supply. Compact Bench Power Supplies. Active Power Factor Control. Accurate voltage and current control by 10 turn potentiometers. Programmable by Analog voltage, Isolated analog, Ethernet, IEEE488 or RS232. ...more

Chroma's new 62000P Series of programmable DC power supplies offer many unique advantages for ATE integration and testing. These advantage include a constant power operating envelope, precision readback of output current and voltage, output trigger signals as well as the ability to create complex DC transients waveforms to test device behavior ...more

Chroma Model 6310 series Economic DC Electronic Load is suitable for the test and evaluation of multi-output AC/DC power supply, DC/DC converter, charger and power electronic components and good for application in areas such as research and development, production, and incoming inspection.  ...more

The 61700 supplies the output voltage from 0 to 300VAC and it can be set individually for each phase. Users also can set the phase angle from 0¢X to 360¢X. These kinds of function make the 61700 series can simulate unbalance 3- phase power. ...more

Chroma Programmable AC Power Source 61600 series delivers pure, instrument grade AC power at very low cost. The 61600 series supplies the output voltage from 0 to 300VAC, and frequency from 15 to 1000Hz.  ...more

The easy to use AlphaStep Plus system couples a closed loop stepping motor with a combined controller, driver and AC power supply. Intelligent, integrated and ideal for technology's increasing demand on motion control, the AlphaStep Plus is computer-programmable via an RS-232 connection. ...more

The Autotest SIRIUS series solid state AC/DC source provides excellent performance enhancement for the UTS and UPT series of power supply test systems. These high performance sources were specifically designed by Autotest Company to provide the ultimate in programmable source power. ...more

Liner programmable power supply with low ripple and noise. Very high accuracy and resolution of 0.1mV/0.1mA. High rise time. Equipped with 5 1/2 digital voltage and MOH meter  ...more