Campbell Scientific, Inc.


Campbell Scientific manufactures dataloggers, data acquisition systems, and measurement and control products used worldwide in research and industry.
Phone (435) 753-2342
Fax (435) 750-9540
Address 815 West 1800 North
Logan , UT 84321-1784
United States
Email info@campbellsci.com
Sponsor Your Catalog
  • DSP4 - Heads Up Display The DSP4 is a real-time data display that simultaneously displays up to four parameters along with user-defined labels. Data values and labels are illuminated for easy visibility in daylight conditions.
    Campbell Scientific
  • CNR1 - Net Radiometer The CNR1 net radiometer is manufactured by Kipp & Zonen for applications requiring research-grade performance. The radiometer measures the energy balance between incoming short-wave and long-wave IR radiation versus surface-reflected short-wave and outgoing long-wave IR radiation.
    Campbell Scientific
  • Raven110 - GPRS/EDGE Cellular Digital Modem The Raven110 GPRS (General Packet Radio Service) modem is an Airlink product made for use on ATT/Cingular cellular networks.
    Campbell Scientific
  • NR-LITE-L - Kipp and Zonen Net Radiometer  The NR-LITE is a rugged net radiometer manufactured by Kipp & Zonen. Net radiometers measure the energy balance between incoming short-wave and long-wave IR radiation relative to surface reflected short-wave and outgoing long-wave IR radiation. 
    Campbell Scientific
  • CD294 - DataView Display The CD294 DataView Display is a two-line, 32-character LCD. It displays one real-time value, a description, and units. You can mount the CD294 into an enclosure lid allowing you to view data on-site without opening the enclosure. 
    Campbell Scientific
  • REDWING100 - AirLink CDMA Cellular Digital Modem The Redwing100 CDMA modem is an AirLink product made for use on Verizon cellular networks. The Redwing100 is an IS-95 CDMA-based modem (Code Division Multiple Access) that offers a high-speed data transfer rate to remote sites at a relatively low operating cost.
    Campbell Scientific
  • Redwing105 - AirLink CDMA Cellular Digital Modem The Redwing105 is a full-duplex, digital cellular modem that communicates with the base station computer via a Code Division Multiple Access (CDMA) network and the Public Switched Telephone Network (PSTN). The Redwing105 uses the Alltel network. 
    Campbell Scientific
  • SDM-AO4 - 4-Channel Continuous Analog Output Module The SDM-AO4 provides four independent continuous analog outputs (0 to +5 Vdc) for proportional control or strip charts. Current sourcing capability is 125 µA. 
    Campbell Scientific
  • SDM-SW8A - 8-Channel Switch Closure Input Module The SDM-SW8A is an 8-channel pulse count module; each channel can be individually configured for single-pole double throw (SPDT), single-pole single throw (SPST), or voltage pulse measurements.
    Campbell Scientific
  • CR7 700X - Measurement and Control System The CR7 is a precision instrument that is primarily used in multi-parameter research and industrial applications. Each CR7 system is individually configured to meet the specific measurement needs of the customer.
    Campbell Scientific
  • ASPTC-L - Aspirated Thermocouple The ASPTC is a white, elongated radiation shield that reduces solar loading on a thermocouple by drawing air across the measurement junction with a fan.
    Campbell Scientific
  • CR9000X - Measurement and Control System The CR9000X is a modular, multiprocessor system that provides precision measurement capabilities in a rugged battery-operated package. 
    Campbell Scientific
  • VSP3 - Voice Radio Interface Module The VSP3 Vosponder, manufactured by DACOM Technologies, Inc., allows customers to call their site using a hand-held UHF or VHF radio and receive a verbal report of real-time site conditions.
    Campbell Scientific
  • VDIV2:1 2:1 - Voltage Divider The VDIV2:1 divides the sensor's signal voltage by a factor of 2. Increased input settling time may be necessary to accommodate the relatively high resistance of the voltage divider. Both resistors are ?0.02% 10 kohm.z 
    Campbell Scientific
  • VDIV10:1 10:1 - Voltage Divider The VDIV10:1 divides the sensor's signal voltage by a factor of 10. Increased input settling time may be necessary to accommodate the relatively high resistance of the voltage divider. 
    Campbell Scientific
  • CE4 - 4-Channel Excitation Current Module The CE4 is a 4-channel current excitation module designed to provide a constant current to the heating element of a 229-L Heat Dissipation Water Matric Potential sensor.
    Campbell Scientific
  • SR50A-L - Sonic Ranging Sensor The SR50A measures the distance from the sensor to a target. The most common applications are measuring snow depths and water levels. The sensor is based on an electronic transducer that determines the distance to a target by sending out ultrasonic pulses and measuring the time it takes for the echoes to return.
    Campbell Scientific
  • CE8 - 8-Channel Excitation Current Module The CE8 is an 8-channel current excitation module designed to provide a 50 mA constant current to the heating element of a 229-L Heat Dissipation Water Matric Potential sensor. 
    Campbell Scientific
  • 4WPB100 - 100 Ohm 4-Wire PRT Bridge Module The 4WPB100 provides completion resistors for measurement of a 100 Ohm Platinum Resistive Thermometer (PRT). 
    Campbell Scientific
  • 4WFB1K - 1-kohm 4-Wire Full-Bridge Module The 4WFB1K supplies two or three legs of a "Wheatstone" or full bridge measurement for a sensor having a nominal resistance of 1000 Ohms. The wheatstone bridge circuit is used to convert small changes in resistance to an output voltage.
    Campbell Scientific
  • 4WFB350 - 350-ohm 4-Wire Full Bridge Module The 4WFB350 supplies two or three legs of a "Wheatstone" or full bridge measurement for a sensor having a nominal resistance of 120 Ohms. The wheatstone bridge circuit is used to convert small changes in resistance to an output voltage. 
    Campbell Scientific
  • 3WHB10K - 3-Wire Half-Bridge Module The 3WHB10K provides the completion resistor required for a 3-wire half bridge measurement. The completion resistor has a resistance of 10 kOhms with a tolerance of ±0.01%. 
    Campbell Scientific
  • 4WPB1K - 4-Wire 1 kOhm PRT Bridge Module The 4WPB1K provides completion resistors for measurement of a 1000 Ohm Platinum Resistive Thermometer (PRT). 
    Campbell Scientific
  • 4WHB10K - 4-Wire Half-Bridge Module The 4WHB10K provides a completion resistor for 4-wire half-bridge measurements. This module should be used with sensors that have a 10 kOhm resistance. 
    Campbell Scientific

Results 1 - 24 of 100