-
product
Pulse Radar Reference Test Solution
Compact Reference Solution with ADP7104, M8195A, WR15CCU, WR15CCD, N5183B combines commercial off-the-shelf COTS modular hardware and software from Guzik, Keysight Technologies, KJ Microwave and Virginia Diodes, which provides a flexible testbed for radar waveform generation and analysis. Generate and analyze pulse radar waveforms. Pre-correct waveforms for overall channel response. Supports many topologies for radar transmitter / receiver testing (IQ, IF, RF, microwave, millimeter-wave).
-
-
product
EMC Testing
KTL facilities support a wide range of accredited Electro Magnetic Compatibility (EMC) and wireless testing services. Our experienced staff can assist with all EMC requirements for compliance testing to European and international standards, and can advise on pre-compliance investigative testing, which is invaluable in product development.
-
product
Small Objective Drop Tester
KD-208
King Design Industrial Co., Ltd.
Testing of Mobile phones, batteries, PDA, digital camera and other hand-held communications and IT product.
-
product
Localization Testing
Localization testing is a method that ensures that an application can be used in a specific area or region. It involves testing the application to verify the accuracy, behavior, and suitability in a specific geographical area.
-
product
Refrigerant Leak Detectors
refrigerant leak detectors use a proprietary semiconductor sensor to detect most commercially available HFC, HFO, HC, HCFC and CFC refrigerants. Our newest model, the RLD440 Refrigerant Leak Detector, goes one step further by complying with all five worldwide refrigerant detection testing standards
-
product
Regenerative AC Emulator, 1200 VAC, 32 A, 45 KVA, 3‑Phase
SL1212A
The SL1200A series was designed to handle all your 3-phase AC test needs up to 1200 VAC, from 30 kVA to 630 kVA without the need for a transformer. Two voltage ranges are available: 600 VAC and 1200 VAC. The 600 VAC models are ideal for low voltage inverter test as well as EV and EVSE charging test applications. The 1200 VAC models allow for (HVRT) testing at the IEC LV-AC limit without the need for a large, complex test setup.
-
product
Fuse Buddy Current Loop
307M/308B
*Just clamp your current probe over the loop to access the amperage draw through a fused circuit. *Easy testing access, plugs right into fuse socket, no more hand made adapters. *Testing range 0-30 Amps - Do Not Exceed 30 Amps
-
product
Environmental Testing
We have a CTS C-65/100 Climatic Test Chamber available for hire at dB Technology.They have available:*Internal dimensions: 500 x 500 x 400mm (w x h x d)*Temperature range: -65°C to +180°C*Heating rate: 3°C/min*Cooling rate: 2°C/min*Climatic temp range: +10°C to +95°C*Humidity Range: 10 to 98% RH
-
product
Digital Free Chlorine Tester
MW10
The Milwaukee MW10 Free Chlorine Photometer lets you go digital with your testing. No more hit and miss testing with strips. Great for agriculture, aquariums, aquaculture & coral, labs, water treatment, classroom and more. This meter is also ideal for educators that want their students to learn the basics of water quality analysis to apply in the real world.
-
product
EMR Testing
It is widely accepted that exposure of the human body to high levels of Electromagnetic Radiation (EMR), Electromagnetic Energy (EME) or Electromagnetic Fields (EMF) may lead to adverse health effects. To ensure the protection of personnel in the workplace and to protect members of the general public, it is essential that the EMR levels comply with relevant exposure limits set by regulators in each country.
-
product
Surge Testers
MTC 2
Advanced automatic high precision electrical winding testers for testing products like alternators, stators, transformers, armatures and motors. Available as static or portable units from 6-50 kV.
-
product
Thermal/Mechanical Testing
Accolade Engineering Solutions
As new products employ advanced materials and processes, the need to measure and characterize those material properties becomes increasingly important. DSC is used to measure heat flow in to or out of a material. Some DSC applications include measurement of melting temperature, polymorphic transitions, crystallization temperature, thermal stability, heat of fusion and degree of cure. TMA is used to measure dimensional changes of a material as a function of temperature.
-
product
Uniaxial Testing Machines
CBR testing machine for performing CBR tests in the laboratory. Two-column version with electric drive and adjustable feed speed. and additional overdrive.
-
product
9050 Rack Mount
The rack mountable 9050 50 Module Receiver is designed to accept 9025 and 9050 ITAs and is ideal for systems with advanced mass interconnect requirements. The 9050 can be adapted to accommodate vacuum or mechanical fixturing. Connector modules can be intermixed for creating custom interfaces ideal for functional and system testing applications.
-
product
Tensile Testing System With Thermostatic Chamber
This thermostatic chamber is ideal for long-stroke tensile testing of large-elongation materials such as rubber and plastic in controlled temperature environments.
-
product
Transforming Analog Circuit Breaker Testers
MAC-21
The MAC-21 uses proven microprocessor and A/D converter technology to provide real-time waveform analysis. This ensures accurate true-RMS readings of current pulses, even with DC offset and distortion, which are typical in primary injection testing. Intelligent threshold algorithms provide accurate trip time measurement. Integration of measurement and control functions allow advanced features such as preset on times, auto ranging, and optional printer or computer interface.
-
product
PMC Carrier Module
DP-VME-5114
DP-VME-5114 is a VME-Based PMC Carrier Module. This 6U VME board PMC carrier can accommodate two PMCs. This board can be used for data acquisition, automated testing and checkout systems
-
product
Continuity Testing
The checking of an electric circuit to see if current flows (that it is in fact a complete circuit).
-
product
Tri-Temp Test Handler
JANUS 2800T Tri-Temp Handler
SESSCO Janus 2800T Tri-temp Handler is designed to accommodate small to medium size standard and custom IC packages. Supports high parallelism of up to octal sites and is equipped with dual high-speed input tube loaders and dual auto output tube unloaders for higher throughput up to 28K UPH. With over 500+ I/O and 16 temperature zones available, it has plenty enough resources for the most demanding applications. It can be customized for MEMS applications and high-voltage testing. Powered by a cutting-edge 10 ns/step all-integrated controller and modular programming design.
-
product
Performance Board
The role of the performance board is accurate transmission of tester signals all the way to the device leads. Custom performance boards from ADVANTEST deliver support for DUTs (devices under test), as they become faster and smaller, with greater pin counts, and increasingly take the form of SMDs. ADVANTEST performance boards also support a host of test requirements, such as analog test, high-speed performance, and high-density, for testing state-of-the-art ICs.
-
product
Safety Testing
Underwriters Laboratories Inc.
As the global safety science leader, our safety offerings and expertise are unparalleled. We can help you engineer safety into your products throughout your development process, reducing costs and challenges associated with innovative offerings. Our testing and certification services focus on helping our customers create a safer, more secure and sustainable world. Our mission of "working for a safer world" drives everything we do. Leverage our offerings and insights to build trust and confidence in your products and services.
-
product
PXI-2585, 10‐Channel, 12 A, 1-Wire PXI Multiplexer Switch Module
778572-85
10‐Channel, 12 A, 1-Wire PXI Multiplexer Switch Module —The PXI‑2585 is a high‐power PXI multiplexer switch module that is ideal for switching power signals and loads in control applications and battery, power supply, and automotive testing. It is configured as a 10x1 multiplexer with both low contact resistance and high isolation voltage. It also features onboard relay counting for relay monitoring and deterministic operation with hardware triggers to improve test throughput.
-
product
High Temperature Diametral Extensometers (1000 C)
Model 3580
Jinan Testing Equipment IE Corporation
This model is for diametral strain measurement with furnace and induction heating systems. Quartz rods and water-cooling allow the unit to be used for high temperature testing of metals, ceramics and composites. With induction heating, this model often can be used without water-cooling. When used in furnaces, the extensometer is often mounted directly to the furnace side cut-out. Optional load frame mounting brackets are available for supporting the extensometer in cases where furnace mounting i...show more -
product
CPU RightMark
CPU RM
The CPU RightMark suite is meant for objective measurement of performance of modern and future processors in different computational tasks such as numerical modeling of physical processes and solving of 3D graphic problems. It focuses on testing the loaded FPU/SIMD units and the CPU/RAM tandem. As a result, we get pure CPU performance, an objective parameter obtained without the influence of other subsystems, like video and disc systems, except the memory one. It allows us to compare the true performance of different processors irrespective of a type of other system components. It's obtained by dealing only with the CPU and measuring the CPU time spent for execution of computational tasks.
-
product
DevOps & Agile Testing
While Agile and DevOps are progressive models, these need considerable evolution within the enterprise. TestingXperts, with its matured Agile and DevOps QA practices and extensive experience of test and lifecycle automation, helps enterprises build the right QA capabilities for Agile and DevOps. Within a fast-moving environment, it is important to ‘fail fast’ by adopting a ‘Shift left’ approach. With shorter testing window, it’s critical for the test team to start early and move at the same pace as rest of the teams. Test Automation also plays a key role in ensuring quicker testing execution and deploying continuous testing approach.
-
product
PCI High Density Pecision Resistor Card, 3-Channel, 4Ω To 1.51MΩ
50-298-150
The 50-298-150 is a high density programmable resistor card with 3 channels which can be set between 4Ω and 1.51MΩ with 0.125Ω resolution The 50-298 range provides a simple solution for applications requiring accurate simulation of resistive sensors. The 40-298 is available in a variety of resistance ranges and resolution capabilities that meet the needs of most functional test systems. It is particularly well suited to applications such as the testing of engine controllers where resistive sensors provide information on parameters such as temperature.
-
product
Engine Dynamometers
Water brake, Eddy current and AC dynamometer systems for heavy-duty diesel, gaseous and gasoline testing applications from 20 through 10,000 HP.
-
product
High Temperature Humidity Analyzer
CI-IN19
Shanghai ChangAi Electronic Science & Technology Co.,Ltd
CI-IN19 humidity analyzer uses vast-contrast humidity sensor as testing unit. It’s an intelligent analyzer at the core of micro-processor and made of detector part & display part. It’s use to measure the relative humidity in air and vapor mixed gas between o to 200℃. - See more at: http://en.ci-ele.com/fb01357d-94e6-2795-f3d2-ea8d5b3a3d31/f7847efb-fece-c4be-5376-3bd0f9a8eeba.shtml#sthash.KCqpmhCp.dpuf
-
product
Manual Type
Concentric Technology Solutions, Inc.
Provides RF shield and signal connections necessary for testing mobile wireless devices, such as mobile cell phones.
