Showing product results. 76 - 90 of 1423 products found.
-
600LS - YSI Incorporated
Measure level, flow, temperature and conductivity with the compact 600LS sonde. Rugged and waterproof, the YSI 600LS is perfect for tide gauge monitoring, wetlands level applications, ground water, estuaries, rivers, and more.
-
Campbell Scientific, Inc.
Water conductivity sensors are used in water-quality applications to measure how well a solution conducts an electrical current. This type of measurement assesses the concentration of ions in the solution. The more ions that are in the solution, the higher the conductivity.
-
Extech Instruments Corporation
Water quality meter can measure thirteen parameters: pH, ORP, temperature, dissolved oxygen, conductivity, total dissolved solids (TDS), salinity, resistivity, specific conductance, ammonium, nitrate, chloride, and barometric pressure.
-
WXU - CKD Corporation
An integrated unit that integrates the flow sensor and valve of the circulation circuit of the cooling water.The complicated piping design around water and the number of man-hours for piping work are greatly reduced, and the footprint is reduced by 80% to save space in the system.
-
CW‑800 - ELTRA GmbH
Determination of released carbon dioxide and water is a special requirement for quality control in the cement and lime industry. ELTRA’s CW-800 analyzer is designed for the precise, simultaneous determination of carbon dioxide and water in lime, gypsum and cement from trace level up to 100 % (depending on sample weight). Other sample materials include ores, soil and minerals. The CW-800 is equipped with a resistance furnace with quartz tube for sample oxidation and can provide temperatures up to 1000 °C. The temperature of the CW-800 can be set up in steps of 1 °C and the temperature is fixed during measurement. As common carrier gas in the CW-800 nitrogen is used.
-
S&DL mini - OYO Corp.
S&DL (Sensor and Data Logger) mini is a water level meter with reasonable price and compact size of 22 mm in diameter and 150 mm in length only. User can choose type of cable based on the site conditions and usage purposes.
-
BFM - PASI srl
Water level indicator with flat cable, stainless steel tape with 2 copper wires, coated with transparent antiscratch protective film in transparent LLDPE.Black millimeter graduation over total length, centimeter and decimeter indication in black, meter indication in red.
-
CM Series - Taylor Dynamometer, Inc.
CM Series Water Brake Dynos from Taylor Dynamometer offer for low upfront cost, low maintenance, low inertia and high durability. Choose from cradle-style dynos for single- or tandem-axle vehicles, with continuous capacity up to 1,100 hp (820 kW).
-
BFM-FF - PASI srl
Water level indicator with removable downhole indicator; flat cable, stainless steel tape with 2 copper wires, coated with transparent antiscratch protective film in transparent LLDPE.Black millimeter graduation over total length, centimeter and decimeter indication in black, meter indication in red.
-
BFK-FF - PASI srl
Water level & downhole indicator with PVC rounded cable, four-conductors, with kevlar core and external anti-scratch protective film in transparent PUR*− Available Cable length: 30m, 50m, 100m, 150m, 200m, 300m, 400m, 500m.* Rounded cable diameter: 5 mm* Graduation at 1 cm intervals (directly printed on the cable itself and protected by external anti-scratching transparent polihuretane)* Probe diameter: 25 mm* Probe material: stainless steel and plastic* Water level indication by both acoustic signal (buzzer) and RED LED* Bottom indication by GREEN LED* Sensibility adjustement through external potentiometer* Cable reel in antishock PVC, with brake, probe support, painted iron frame* Power supply through 9V battery (externally replaceable)
-
Honeywell International Inc.
To install the optional cable sensor, simply plug it into the detector. The entire length of cable is an extended sensor. Additional 4 foot cable sensors (sold separately) can be connected to extend the cable and increase water sensing area even more. Note: The cable sensor jack is NOT for plugging in a power adapter. Doing so could damage the detector.**
-
WMS-02 - PASI srl
Water level indicator with temperature display; PVC rounded cable, four-conductors, with kevlar core and external antiscratch protective film in transparent PUR* Cable length available: 30m, 50m, 100m, 150m, 200m, 300m, 400m, 500m. * Rounded cable diameter: 5 mm* Graduation at 1 cm intervals (directly printed on the cable itself and protected by external anti-scratching transparent polihuretane)* Probe diameter: 10 mm* Probe material: stainless steel and moulded rubber, with segmented weights for more flexibility* PT100 temperature sensor (accuracy +/- 0.1°C, range from -10 to +50 °C)* Water level indication by both acoustic signal (buzzer) and LED* Temperature display* Cable reel in antishock PVC, with brake, probe support, painted iron frame* Power supply through 9V battery (externally replaceable)* Optional removable hook for bailer
-
EZ-10 - Panasonic Industrial Devices Sales Company of America
The EX-10 is a special Thru-Beam Sensor that was designed for two purposes; to check fluid levels and to detect the level of liquids containing water. The emitter on the EX-10 Sensor uses a particularly strong IR beam to not only penetrate transparent, but also semitransparent or colored containers such as PFA packages or shampoo bottles. Also, the sensitivity of the Sensor is adjustable to allow it to focus on a target, such as distinguishing foam from liquid in drinks, as an example.
-
Hanna Instruments, Inc.
Monitor your systems efficiently and consistently with process control equipment. Control multiple parameters automatically with a range of instrumentation.
-
Hanna Instruments, Inc.
Titrate quickly and accurately with an automatic titration system. Method optimization is as easy as pressing a button.
