Showing recent results 781 - 795 of 1067 products found.
-
W-IE-NE-R, Plein & Baus GmbH
MARATON is a family of MAgnetic field and RAdiation TOleraNt power supplies developed for CERN LHC. MARATON HHE is the 12 channel version for use in a hazardous hostile environment. Magnetic field tolerance is achieved by water cooling (up to 300G) and shielded components (up to 1200G). For radiation hardness (<30Gy) a quasi-redundant principle of power conversion is combined with special components. Further radiation sensible components are placed at remote locations.
-
8733 - TEGAM Inc.
Multi-purpose probe for measuring air, liquids, soft materials, (e.g., water, ice cream, etc.). Compact size makes this probe easy to transport. The 403 stainless steel sheath is 3-3/4" long with a 2" handle. Thermoplastic rubber, coil-styled cord extends from 1-1/2 feet to 5 feet. Model 8733 is a Type K probe and Model 8753 is a Type T.
-
D9600Z - Sonoscan Inc.
This is the first acoustic microscope with an inverted transducer to permit scanning samples from the bottom side. Bottom-side scanning is necessary for many IGBT (Insulated Gate Bipolar Transistor) modules where top side components must be kept away from the water used to couple the ultrasound from the transducer to the sample. The D9600Z is configured to inspect two modules simultaneously via two stages with Sonomatched transducers and WaterPlume couplers.
-
T&C Power Conversion
100 W to 2400 W 13.56 MHz Analog/Digital, RS-232, USB interfaces Low Harmonic Distortion Automatic and Manual Gain Control High Speed Pulsing (Bursting) controls Compatible with T&C''''s Matching Networks GUI Software (complete PC control) Includes all essential RF power/communication cables and mounting brackets Air cooled (Air & Water 1200 W +) Half rack mount or stand alone versions Ideal for: Industrial, Scientific, and Medical Applications
-
ESG Solutions
Real-time seismic monitoring of natural or induced seismicity in or around oil and gas production or waste water injection provides operators with the data needed to manage their operations and assess potential risk of induced seismicity. Spectraseis (an ESG-managed company) designs, implements and operates real-time seismic networks that help oil and gas operators to better manage public and regulatory concerns regarding seismicity near production and injection activities.
-
General Tools & Instruments
Together, an environment's temperature and relative humidity (RH) indicate how comfortable it "feels" to humans. General sells a variety of temperature/humidity monitors that either show real-time readings like the A600FC High Temperature Analog Humidity-Temperature Meter or log measurements over time for trending purposes such as the HT50 USB Temperature-Humidity Data Logger. Trend analysis is the rationale for another popular application for temperature/RH monitors - water damage restoration.
-
ITS-90 - Fluke Calibration
The defining instruments of the ITS-90 (International Temperature Scale of 1990) are Standard Platinum Resistance Thermometers (SPRTs) and ITS-90 fixed-point cells. SPRTs are calibrated in fixed-point cells to provide the highest possible temperature accuracy. Primary standards offered by Fluke Calibration include: long-stem SPRTs; capsule SPRTs; triple point of water cells; metal fixed-point cells; maintenance baths and maintenance furnaces for fixed-point cells; standard resistors.
-
TrackIt - Teledyne Benthos
The first in a series of Teledyne Benthos USBL deliverables, the "Short Range USBL" is geared toward the tracking and positioning of shallow water autonomous or remotely operated vehicles. Leveraging Teledyne Benthos extensive technical expertise and field experience in acoustic positioning and communications, this new system brings it all together with a powerful topside processing package, intuitive user interface, communications, and highly accurate, field proven subsea electronics.
-
LKZ-720 - Sonel S.A.
*Detection of wires and cables (live or not)**detection of cables in ceilings, walls and floors,**detection of breaks in cables,**tracing cables in building installation,**locating power points and switches in buildings,**locating short circuits between leads,**tracing shielded cables,**tracing cables in metal ducts.*Identification of fuses on the distribution board.*Tracing underground cables.*Tracing conductive water and heating pipelines.*Non-contact detection of live cables.
-
SID - PASI srl
SID calculates hydraulic sections of any form and of any geometrical and hydraulic characteristics. The program determines, for a given section, the height and speed values reached by the water, assuming that the channel has a prismatic form of infinite length. The formula used by the program utilises the average velocity as a function of the mean radius of the section, that is equal to the ratio between the area of the hydraulic section and the wet boundary, of the loss of load and of the friction coefficient.
-
45-100kw - Shenzhen Setec Power Co., Ltd.
Solar pumping system is composed of a solar array,a pump and a solar pumping inverter. Based on the design philosophy that it is better to store water than electricity , there is no energy storing device such as storebattery in the system. The solar array,an aggregation of many solar modules connected in series and parallel , absorbs sunlight radiation and converts it into electrical energy , providing dynamical water for the whole system. The pumping inverter controls and adjusts the system operation and converts the DC produced by solar array into AC to drive the pump , and adjust the output frequency intensity to realize the maximumpower point tracking (MPPT) . The pump, drive by 3-phase AC motor,can draw water fromthe deep wells or rivers and lakes to pour into the storage tank or reservoir , or directly connect to the irrigation system ,fountain system,ect. According to the actual systemdemand and installation conditions,different types of pump such as centrifugal pump, axial flow pump,mixed-flow pump or deep-well pump can be used.
-
22-37kw - Shenzhen Setec Power Co., Ltd.
Solar pumping system is composed of a solar array,a pump and a solar pumping inverter. Based on the design philosophy that it is better to store water than electricity , there is no energy storing device such as storebattery in the system. The solar array,an aggregation of many solar modules connected in series and parallel , absorbs sunlight radiation and converts it into electrical energy , providing dynamical water for the whole system. The pumping inverter controls and adjusts the system operation and converts the DC produced by solar array into AC to drive the pump , and adjust the output frequency intensity to realize the maximumpower point tracking (MPPT) . The pump, drive by 3-phase AC motor,can draw water fromthe deep wells or rivers and lakes to pour into the storage tank or reservoir , or directly connect to the irrigation system ,fountain system,ect. According to the actual systemdemand and installation conditions,different types of pump such as centrifugal pump, axial flow pump,mixed-flow pump or deep-well pump can be used.
-
Precision Acoustics LTD
Membrane Hydrophones Precision Acoustics'' manufactures high quality co-planar Membrane Hydrophones which have been developed to satisfy the stringent requirements of MHz ultrasound measurements. The Differential Membrane Hydrophone model is suited to the most demanding, wide bandwidth measurements situations but requires water with very low conductivity. The differential input preamplifier is embedded in the hydrophone ring, and the electrode pattern on the membrane has been re-designed to ensure an asymmetrical electrode area. The result is an improvement in the signal-to-noise ratio to allow membrane hydrophones based on 9 m to measure harmonic components in excess of 120 MHz The UT model of Membrane Hydrophone is the product of choice for broad bandwidth measurements where water quality cannot be guaranteed. They can be used on its own or in conjunction with Precision Acoustics'' Signal Amplifier to reduce noise and add a limited amount of gain over a wide bandwidth. For additional gain the membrane hydrophone can also be used with the Hydrophone Booster Amplifier to add 28dB of gain.
-
Walsn Enterprises Ltd.
The fuels used in boilers, such as coal, heavy oil and natural gas, contains S. during the combustion process, S and O₂ form SO₂, and a small amount of SO₂ is converted into SO₃ under catalysis of Fe₂O₃, V₂O₅ and other catalysts. Under normal circumstances, the volume of SO₃ in the boiler flue gas is 1×10-6～50×10-6, and the water vapor is about 10%. When the temperature of the flue gas is below 200°C, SO₃ and the water vapor are completely combined into H₂SO₄ vapor. A small amount of H₂SO4 vapor will significantly increases the acid dew point. When the surface temperature of the boiler heat exchange equipment is lower than the flue gas acid dew point, the H₂SO₄ vapor will condense on the surface to become sulfuric acid solution with a concentration of about 80%, which will adhere to the surface of the heat exchanger and cause acid corrosion. Typical equipment that is prone to corrosion includes air preheaters, induced draft fans and flue walls.
-
EL-USB-RT - Lascar Electronics Ltd
When plugged into the USB port of a PC installed with the purpose designed software underWindows 2000, XP and Vista, EL-USB-RT measures temperature and relative humidity from -10 to +60C (+14 to +140F) and 0 to 100%RH. The PC displays the temperature, humidity and dew point(the temperature at which water vapor present in the air begins to condense) in real-time and saves it to a file which can store up to 7 day's worth of data.
