Showing recent results 61 - 75 of 100 products found.
-
VPX3-P5000 Series - ADLINK Technology Inc.
*NVIDIA Pascal architecture GP104/GP107 GPU with up to 2048 CUDA cores*Up to 16GB GDDR5 Memory with NVIDIA GPUDirect™ DMA technology*PCIe x16 Gen3 to P1*Four DisplayPort 1.4 outputs
-
-
VPX 6U - Pentek, Inc.
Is a member of the Cobalt® family of high-performance6U OpenVPX boards based on the Xilinx Virtex-6 FPGA. They consist of one or two Model 71690 XMC modules mounted on a VPX carrier board.
-
3U VPX - PCI EmbeddedComputer Systems
The system is 3U VPX based. It consists of two CPU modules, a power supply module [SMART.PSU] Technology explained <- Click here, two PMC/XMC carrier modules and two MILBUS modules. Optional: WLAN module for controlling the system externally without hanger access (Aircraft on runway - pre-takeoff)
-
VPX-3 - DeltaTech Electronics
The VPX system is designed to test and regulate distributor injection pumps Bosch VP37, which work with the electronically controlled power systems of EDC compression- ignition engines (Electronic Diesel Control) used in passenger cars and vans.In the EDC systems, the dose of the fuel injected by the injection pump is not mechanically adjusted by the accelerator lever, but by the electronic control device called a dosing actuator.
-
VPX55-3HU - North Atlantic Industries
The VPX55-3HU is a 400-Watt DC/DC Power Line Conditioner which plugs directly into a standard 3U VPX chassis with a VITA 62 0.8" or 1.0" power slot. This off-the-shelf solution is compatible with VPX specifications and addresses the need for 3U VPX power applications requiring an optional VITA 62 Energy Storage Module.
-
VPX315 - W-IE-NE-R, Plein & Baus GmbH
WIENER VPX power supplies are commercial off-the-shelf (COTS), conduction cooled single stage converters according to the ANSI/VITA 62.0 specification. They can be used to power a VPX chassis and will fit into the standard envelope defined by VITA 48.0 specifications.
-
VPX340 - W-IE-NE-R, Plein & Baus GmbH
WIENER VPX power supplies are commercial off-the-shelf (COTS), conduction cooled single stage converters according to the ANSI/VITA 62.0 specification. They can be used to power a VPX chassis and will fit into the standard envelope defined by VITA 48.0 specifications.
-
pixus technologies
With options for VITA 46/VITA 48 compliant specifications for VPX (with VITA 65 OpenVPX compliant backplanes), Pixus offers complete systems with power supply unit and backplane, fully assembled, pre-wired and tested. With a modular design approach, Pixus can offer virtually unlimited VPX chassis configurations for 3U and 6U boards. The VPX enclosures come in 1U-4U horizontal-mount (for 6U boards), 4U-5U vertical-mount (for 3U cards), and 7U, 9U, and higher chassis (for 6U OpenVPX boards).
-
STAR-Dundee
With options for VITA 46/VITA 48 compliant specifications for VPX (with VITA 65 OpenVPX compliant backplanes), Pixus offers complete systems with power supply unit and backplane, fully assembled, pre-wired and tested. With a modular design approach, Pixus can offer virtually unlimited VPX chassis configurations for 3U and 6U boards. The VPX enclosures come in 1U-4U horizontal-mount (for 6U boards), 4U-5U vertical-mount (for 3U cards), and 7U, 9U, and higher chassis (for 6U OpenVPX boards).
-
North Atlantic Industries
VPX is a proposed ANSI standard – a departure from the traditional connector scheme of VMEbus. While VME is based on a bus with signals daisy-chained at each slot, VPX is based on switched fabrics, allowing data rates to go much higher and are inherently much more reliable. VPX specifications chart a new course for the next revolution in bus boards. OpenVPX is the name of a group of companies that joined together in 2009 to address the VITA 46/VPX system specification. The group is made up of embedded military Commercial Off-the-Shelf (COTS) vendors and system integrators.
-
VPX55-3 - North Atlantic Industries
NAI's VPX55-3 is 400-Watt DC/DC Converter that plugs directly into a standard 3U VPX chassis with a VITA 62 0.8" power supply slot. This off-the-shelf solution for VITA 46.0 and VITA 65 systems is compatible with VPX specifications; supports all VITA standard I/O, signals, and features; and conforms to the VITA 62 mechanical and electrical requirements for modular power supplies.
-
Curtiss-Wright Defense Solutions
Carrier cards allow a designer to expand system capabilities, especially I/O, by simply plugging in a card that ‘carries’ another module into the system. Curtiss-Wright provides carrier cards for using XMC and PMC modules in 3U VPX, 6U VPX, VME and CompactPCI systems. These 3U and 6U Carriers provide great flexibility in adding additional I/O to support a systems' single board computer.
-
VPX56-6 - North Atlantic Industries
NAI's VPX56-6 is a 700-Watt AC/DC Power Supply which accepts either a 3 115Vac L-N inputs or a +270Vdc input. It plugs directly into a standard 6U VPX chassis with a (VITA 62) 1.0" power supply slot. This off-the-shelf solution for VITA 46.0 and VITA 65 systems is compatible with VPX specifications; supports all VITA standard I/O, signals, and features; and conforms to the VITA 62 mechanical and electrical requirements for modular power supplies.
-
Tracewell Systems
Tracewell Systems has extensive experience designing and manufacturing systems based on standard architectures including VPX, VXS, VME, VME64x, VXI, ATCA, MicroTCA, CPCI, and PXI.
