Showing results: 136 - 150 of 213 items found.
-
Testifire 2000 -
SDi
Testifire is the world's first multi-stimulus detector tester for smoke, heat and CO fire detectors. It enables faster and more efficient testing of both single and multi-sensor detectors. There are two models available Testifire 1000 for testing smoke and heat and Testifire 2000 for testing smoke, heat and CO. Testifire is the result of several years of technological development and as a result is by far the most advanced tester available. Testifire is UL certified and is approved by leading detector manufacturers from around the world.
-
Testifire 2001 -
SDi
Testifire is the world's first multi-stimulus detector tester for smoke, heat and CO fire detectors. It enables faster and more efficient testing of both single and multi-sensor detectors. There are two models available Testifire 1000 for testing smoke and heat and Testifire 2000 for testing smoke, heat and CO. Testifire is the result of several years of technological development and as a result is by far the most advanced tester available. Testifire is UL certified and is approved by leading detector manufacturers from around the world.
-
TESTIFIRE 1001 -
SDi
Testifire is the world's first multi-stimulus detector tester for smoke, heat and CO fire detectors. It enables faster and more efficient testing of both single and multi-sensor detectors. There are two models available Testifire 1000 for testing smoke and heat and Testifire 2000 for testing smoke, heat and CO. Testifire is the result of several years of technological development and as a result is by far the most advanced tester available. Testifire is UL certified and is approved by leading detector manufacturers from around the world.
-
CX-Z11 -
Shenzhen Chuangxin Instruments Co., Ltd.
The Fingernail Test Probe is used to test to IEC 60335 and UL standards. It checks the security of parts that snap together. The spring loading in the handle can be calibrated to the force necessary to use the instrument. This probe is made of stainless steel with specially hardened tip and a Delrin?handle. Handle has a threaded hole for use with force gauges.
-
Extech MA145 -
Extech Instruments Corporation
The MA145 is a Compact AC/DC Clamp Meter with NCV Detector. This Clamp meter takes True RMS measurements for accurate readings of noisy, distorted or non-sinusoidal waveforms. The MA145 can measure up to 300A AC and DC. Complete with carrying case and two LR44 batteries. UL listed with a CAT III 600V safety rating.
-
228 -
Simpson Electric Company
Test for dangerous leakage current with the Simpson Model 228, designed to meet the latest UL, IEC, and ANSI specifications. The 228 detects both AC and DC leakage current and simulates human response at three different levels -- reaction, let-go, and burn hazard. Each Model 228 comes with test leads with alligator clips, manual, and batteries.
-
SCP1000/SCP2000 -
Electro-Sensors, Inc.
Features• Internal sensor• Over-or under-speed config., 1-990 rpm• 1 DPDT relay output (SCP1000), 2 SPDT relay outputs (SCP2000)• Built-in start delay• Dial-in calibration does not require power• 115, 230 VAC (50-60 Hz) and 12, 24 VDC power options• Works with Electro-Sensors magnetic pulser discs / wraps• Explosion proof housing• UL Listed Class I, Div I (C, D) Class II, Div I (E, F, G)
-
UDS1000 -
Electro-Sensors, Inc.
Features • Works with remote / external quadrature pulse frequency output sensor / incremental encoder (NPN or PNP) • DPDT relay changes state when shaft direction reverses • Reverse-over-speed setpoint adjustment from 0.5-5,000 rpm • Relay resets when reverse motion stops • 115, 230 VAC (50-60 Hz) and 12, 24 VDC power options • Explosion proof/NEMA 4X housing • UL Listed Class I, Div I (C, D) Class II, Div I (E, F, G)
-
CX-75 -
Shenzhen Chuangxin Instruments Co., Ltd.
The Finger Nail Probe is indicated test IEC60335 and UL requirements. Used to check the security of parts that snap together. The spring gauge assembled in the handle can be calibrated to the neccessary force for using the instrument. This probe is make of stainless steel with appropriated hardened tip and a handle in insulating material. Handle has a special adaptor M5 for use with 50N force gauges.
-
CX-Z12 -
Shenzhen Chuangxin Instruments Co., Ltd.
The Finger Nail Probe is indicated to test IEC 60335 and UL requirements. Used to check the security of parts that snap together. The spring gauge assembled in the handle can be calibrated to the necessary force for using the instrument. This probe is made of stainless steel with appropriated hardened tip and a handle in insulating material. Handle has a special adaptor M5 for use with 50N force gauges.
-
Extech MA260 -
Extech Instruments Corporation
The MA260 is a True RMS 200A AC Open Jaw Clamp Meter. The MA260 has a built in NCV detector and can measure up to 200A in its 0.6 in. open jaw. True RMS for accurate readings of noisy, distorted or non-sinusoidal waveforms. Complete with test leads and two AAA batteries. UL listed with a CAT IV 600V safety rating.
-
RT110 -
Klein Tools, Inc.
Light sequence indicates correct/incorrect wiring.Conforms to UL Std 1436, Certified to CSA Std C22.2 #160.Operating temp: 32°F to 140°F (0°C to 40°C).Built to withstand a 6.6 ft. (2m) drop.Nominal Voltage: 110/125V AC at 50/60Hz in 3-wire outlet.Designed to detect the most common wiring problems in standard receptacles.
-
ENVIROMUX-DCSR-U -
Network Technologies Inc
Monitors access with a magnetic bridge sensor (no special inserts necessary). Ideal for commercial and industrial installations in harsh environments. Heavy-cast aluminum housing with 18-inch stainless steel armored cable. Floor-mounting hardware included. Universal-style magnet option has a smaller width and depth that provides greater installation flexibility. For normally open or normally closed circuit connection. Wide actuating gap, approximately 3". Maximum cable length: 1,000 ft (305 m). Dimensions WxDxH (in): Magnet: 3.13x0.81x2.13 (79x21x54 mm), Switch: 3.5x1.5x0.44 (89x38x11 mm). Regulatory approvals: UL.
-
CX-T04 -
Shenzhen Chuangxin Instruments Co., Ltd.
This Spring Impact hammer is strictly designed according to IEC60068-2-75, IEC884 and UL1244 GB/T2423.55-2006, GB4706.1, GB8898 and GB7000 standards. It is used to test the mechanical integrity of product enclosures. After applying the impact with the hammer, the product is examined with accessibility probes to determine access to shock, energy, and injury hazards. Built in exact accordance to IEC\EN, \UL\CSA and other international Standards.
-
19055 -
Chroma Systems Solutions, Inc.
Hipot or dielectric withstand testing instruments manufactured by Chroma are used for conducting electrical safety tests on electrical components and products to make certain they are in compliance with IEC, UL, TUV, CSA, EN and other electrical safety requirements. In addition, these instruments are designed for general product or component testing as well as complex medical safety testing (60601-1) ensuring human safety and product reliability.