Product

Low Resistance Test System

9100-2

-

Palico Instrument Laboratories

9100-2 - Palico Instrument Laboratories

The Model 9100-2 measures the resistance of single or multiple battery separators quickly and accurately when used with our Model 9000-9100 Electrolyte Test Bath. This system uses a 4-terminal measurement technique which cancels the effects of electrode/electrolyte potentials.

Product

Environmental Testing Equipment

-

Gester Instruments Co., Ltd.

Gester Instruments Co., Ltd.

It is to do adaptability and properties test for materials under different environment conditions, which includes salt spray test to determine corrosion resistance and temperature and humidity chamber to do a variety of high-low temperature alternating test.

Product

Class 2 Sound Pressure Level Meter

Castle Sonus GA216B

-

Castle Group Ltd.

Castle Sonus GA216B - Castle Group Ltd.

This class 2 Sound Level Meter (GA216B) is a feature packed instrument that is fully complient with IEC 61672-1:2002. This meter provides you with the ability to measure sound pressure (Lp) and peak (Cpeak) simultaneously, a requirement for multiple tasks including initial spot-check assessments to the Control of Noise at Work Regulations 2005. The body is designed from tough, crack resistant ABS plastic, ensuring your new Sound Level Meter will survive the conditions for which it was intended. Coming with a high specification measurement microphone which has been calibrated before you receive it, you can be sure your readings are accurate from day one.

Product

Rack Mount Cable Tester

AudioJog Rack

-

CableJoG Ltd

AudioJog Rack - CableJoG Ltd

There are 2 rows of 6 LED's corresponding to each of the possible connector pins and one for the screen (or ground) connection. As each pin is activated, the LED's indicate all connections associated with that pin, so that short, open and crossed circuits can be easily found. The LED's also show the possibility of high resistance or leakage connections.

Product

Battery Cell Insulation Tester

Chroma 11210

-

Chroma Systems Solutions, Inc.

Chroma 11210 - Chroma Systems Solutions, Inc.

Chroma 11210 battery cell insulation tester is an instrument used for accurately measuring leakage current (LC) and insulation resistance(IR) of battery jelly-roll/dry-cell as well as other insulation materials. In addition to standard LC/IR measurement, the 11210 has a unique function that detects partial discharge (PD) or flashover that may have occurred inside the insulation material during the high voltage insulation testing process.

Product

Industrial Resistivity Meter

HE-480R(W)

-

HORIBA, Ltd.

HE-480R(W) - HORIBA, Ltd.

The HE-480R industrial resistivity meter features the high-precision temperature compensation function.Its high-performance temperature compensation makes it ideal for sequential monitoring of ultra-pure water used in manufacturing processes in the semiconductor field, and many other fields, including the areas of electrical goods, foods and medicines. The measurement range is from 0 to 100.0 MΩ・cm.

Product

Martindale Abrasion and Pilling Tester

-

Sataton Instruments Technology CO., Ltd

Sataton Instruments Technology CO., Ltd

By providing a defined load, a translational movement tracing a Lissajous figure and abrasive medium, martindale abrasion tester is professional designed for determining of the abrasion resistance of fabrics including specimen breakdown, mass loss and appearance change. The tester can also use to determine the resistance to pilling and surface change of textile fabrics. With accessories, the tester is to determine abrasion resistance of lining and insock for personal protective footwear. It is widely used to evaluate the properties of clothes fabrics, coating materials, wool fabrics, nonwovens and other special materials for protective equipment.

Product

Current Transformer Tester

CTT

-

ndb Technologies Inc.

CTT - ndb Technologies Inc.

The CTT is designed to test the current transformer ratio, Phase shift, Polarity, Excitation, Saturation, Winding resistance and Insulation resistance using the voltage method in compliance with ANSI/IEEE C57.13.1 and IEC 60044-1 standards, where voltage is applied to the secondary X terminals of the current transformer.

Product

High Current Electronic Load (600W-1200W)

ELCH600 & ELCH1200

-

Aplab Limited

ELCH600 & ELCH1200 - Aplab Limited

- Low lead resistance <5m Ohm for Fuel-cell- Battery Testing- VFD display- High resolution 0.1mA/1mV- Voltage range 0V to 500V- Working mode CV/CC/CW/CR- OV/OC/OP/OT protection- Communication: USB/RS232/GPIB

Product

PET Bottle Vertical Load Tester

VP-1000

-

Jinan Saicheng Instrument

VP-1000 - Jinan Saicheng Instrument

VP-1000 PET Bottle Vertical Load Tester is professionally designed to test the top load resistance, container body side load resistance of the PET container.

Product

Basic Multimeters

-

PeakTech Prüf- und Messtechnik GmbH

PeakTech Prüf- und Messtechnik GmbH

Is a very handy and safe pocket-sized multimeter. It offers measurement functions for direct and alternating voltage, direct and alternating current and resistance measurement. A continuity test and diode test can also be carried out.

Product

OHMMETERS

DOT-1000-2

-

Criterion Instruments Limited

DOT-1000-2 - Criterion Instruments Limited

Model DOT-1000-2, is an ac four-terminal ohmmeter to be used for the measurement of dynamic ac resistance of batteries, fuel cells and other voltage sources.

Product

Pocket Multimeter

-

Shenzhen UYIGAO Electronic Technology Co., Ltd

Shenzhen UYIGAO Electronic Technology Co., Ltd

Accurate, provides multiple functions, and is easy to use. The multimeter tests AC/DC voltage, DC current, resistance, and diode continuity.

Product

3 Wire (Digital) Earth Resistance Tester

1120 ER

-

Standard Electric Works Co., Ltd

1120 ER - Standard Electric Works Co., Ltd

● Waterproof: IP54● Capable of measuring earth resistance and earth voltage● 2mA measuring current permits the testing of earth resistance without tripping earth leakage current breakers in the circuit under test● The test leads are supplied as standard accessories for simplified two-wire measuring system● 0Ω adjustment● Battery operated● Data hold function● Low battery indication

Product

Contact Resistance Meter

CRM 200B+

-

Scope T&M Pvt, Ltd.

CRM 200B+ - Scope T&M Pvt, Ltd.

CRM directly measures micro-ohm values at 200A DC under live EHV switchyard conditions quickly & accurately. It is specially designed to reliably measure micro-ohm contact resistances of Circuit Breakers, Isolators, Busbar joints, earth switch joints, welded joints etc., under the hostile electrostatic noise found in live EHV switchyards up-to 765 kV. SCOPE’s ability to make electronics work in such environment enables CRM to measure mili-volts signal in the presence of kilo-volts noise.

Product

DC Bias Attenuators

-

Pasternack Enterprises, Inc.

Pasternack Enterprises, Inc.

a fixed DC Bias attenuator from Pasternack. This 10dB attenuator is an in-line, resistive PI attenuator pad design. Our coaxial 50 Ohm attenuator is manufactured to precise RF / microwave industry specifications.

Product

Resistive Components

-

Smiths Interconnect

Smiths Interconnect

Diamond is the best thermal conductor on earth. Combined with a low dielectric constant, it is an excellent RF dielectric material for high-frequency applications in which thermal performance is equally critical. By applying cutting-edge thin film process and extensive millimeter wave design experience, Smiths Interconnect has created a high-performance line of resistive components. The resulting products, our Diamond RF Resistives® resistors, terminations, and attenuators, are significantly reduced in size and unparalleled in average and peak power handling.