Filter Results By:

Products

Applications

Manufacturers

Memory

data retained.

See Also: Memory Test, DDR, NAND, DRAM, Memory Device


Showing recent results 1171 - 1185 of 1571 products found.

  • Universal Programmers

    Xeltek Inc.

    Xeltek engineers work around the clock to maintain the largest device library in the industry, so new devices are being added on a daily basis for EPROM, Paged EPROM, Parallel and Serial EEPROM, FPGA Configuration PROM, FLASH memory (NOR), BPROM, NVRAM, SPLD, CPLD, EPLD, Firmware HUB, Microcontroller, and MCUs. The majority of SuperPro universal programmers come equipped with a ZIF socket supporting up to 144 pins for programming a wide range of DIP devices; other chip package supported includes SDIP, PLCC, JLCC, SOIC, QFP, TQFP, PQFP, VQFP, TSOP, SOP, TSOPII, PSOP, TSSOP, SON, EBGA, FBGA, VFBGA, uBGA, CSP, and SCSP.

  • Programable Power Supply & Programable Electronic Load

    EL-820P - PINTEK Electronics

    *Digital button control and easy operation*High resolution(20mV, 10mA, 0.1W, 0.1Ω)*Overload prevention function*9 sets programmable memory*4 sets real time display*Voltage range: 1V~63V*Current range: 10mA~15A*Maximum power: 200W*Operation mode: CV, CC, CP and CR*Built in USB interface

  • 2-CH 14-Bit 200 MS/s High-Speed PCI Express Digitizer

    PCIe-9852 - ADLINK Technology Inc.

    The ADLINK PCIe-9852 is a 2-CH 14-bit 200 MS/s digitizer for high frequency and wide dynamic range signals with an input frequency up to 90 MHz. The 90 MHz bandwidth analog input with 50Ω impedance is designed to receive ±0.2 V, ±2 V, or ±10 V high speed signals. With a PCI Express bus interface and ample onboard acquisition memory up to 1 GB, the PCIe-9852 easily manages simultaneous 2-CH data streaming. With high speed and high linearity 14-bit A/D converters and high stable onboard reference, the PCIe-9852 provides both high accuracy and high dynamic performance, making it ideal for applications requiring high-speed data acquisition, such as optical fiber and LIDAR testing, and video signal analysis.

  • 2-CH 14-Bit 200 MS/s High-Speed PXI Express Digitizer

    PXIe-9852 - ADLINK Technology Inc.

    The ADLINK PXIe-9852 is a 2-CH 14-bit 200 MS/s digitizer for high frequency and wide dynamic range signals with an input frequency up to 90 MHz. The 90 MHz bandwidth analog input with 50Ω impedance is designed to receive ±0.2 V, ±2 V, or ±10 V high speed signals. With a PCI Express bus interface and ample onboard acquisition memory up to 1 GB, the PXIe-9852 easily manages simultaneous 2-CH data streaming. With high speed and high linearity 14-bit A/D converters and high stable onboard reference, the PXIe-9852 provides both high accuracy and high dynamic performance, making it ideal for applications requiring high-speed data acquisition, such as optical fiber and LIDAR testing, and video signal analysis.

  • Handheld X-Ray Imager

    HBI-120 - Viken Detection

    Heuresis’ HBI-120 is a rugged, ergonomic, handheld backscatter x-ray instrument that enables users to quickly and cost-effectively find concealed explosives, narcotics and other contraband, even through 12- gauge (over 2 mm thick) steel — more than twice the thickness of typical motor-vehicle body panels — with none of the limitations of portable transmission x-ray systems. The HBI-120 weighs only 6.6 lbs. (3.0 kg) and images objects with a miniaturized, internal 120 keV x-ray generator that makes a raster-scanning pencil beam of x-rays to scan objects of interest. As the handheld HBI-120 is moved over the object, a 2- dimensional backscatter x-ray image of the object is displayed in real-time on HBI-120's high-resolution transflective LCD touchscreen and saved in the instrument’s memory.

  • 3.5" Embedded SBC With Intel® Atom® Processor E3845/E3827, LVDS/VGA/HDMI, Dual LANs, Audio And ZIO

    CAPA840 - Axiomtek Co., Ltd.

    The CAPA840, a fanless 3.5-inch embedded single board computer, is based on the latest generation of Intel® Atom® processor E3845 or E3827 featuring 1.91/1.75GHz clock speed. Two DDR3L SO-DIMM slots support system memory up to 8 GB. Moreover, the fanless embedded board delivers better level of processing and graphics performance than previous generation Intel® Atom™ SBCs, while consuming less power. In addition to rich onboard I/Os, the CAPA840 adopts an ZIO connector on the rear-side that integrates PCIe x1, USB, LPC and SMbus expansion. With excellent thermal design, the 3.5” embedded board is able to run fanless and works smooth between -20°C to 70°C environments.

  • 4/8-CH 12-Bit 1 MS/s Analog Output Multi-Function DAQ Cards

    DAQ-2500 Series - ADLINK Technology Inc.

    ADLINIK DAQ-2501 and DAQ-2502 are high-speed and high-performance analog output multifunction DAQ cards. The devices are able to update up to 8-CH, 12-bit analog outputs simultaneously at sustaining 1 MS/s. The reference sources and the output polarities are programmable on per channel basis, combining with the multiplying DAC architecture, ADLINK DAQ-2500 series DAQ cards can generate complex modulated analog signals. The hardware-based arbitrary waveform generation frees the CPU intervention even when all analog outputs are updating at full speed, and the lengths of waveforms are only limited by the system memory. The DAQ-2500 series integrate up to 8-CH, 400 kS/s, 14-bit single-ended analog inputs with programmable polarity, 24-CH programmable digital I/O lines, and 2-CH 16-bit general-purpose timer/counters.

  • 4/8-CH 12-Bit 1 MS/s Analog Output Multi-Function PXI modules

    PXI-2500 Series - ADLINK Technology Inc.

    ADLINIK PXI-2501 and PXI-2502 are high-speed, high-performance analog output multifunction PXI modules. These devices are able to update up to 8-CH, 12-bit analog outputs imultaneously sustaining 1 MS/s. The reference sources and output polarities are programmable individually per channel. Combine this with the multiplying PXI architecture, ADLINK PXI-2500 series PXI modules can generate complex modulated analog signals. The hardware-based arbitrary waveform generation frees CPU intervention even when all analog outputs are updating at full speed, and the lengths of waveforms are only limited by the system memory. The PXI-2500 series integrate up to 8-CH, 400 kS/s, 14-bit single-ended analog inputs with programmable polarity, 24-CH programmable digital I/O lines, and 2-CH 16-bit general-purpose timer/counters.

  • Analog Output (D/A) Card

    CompuGen 4300/4302 - Digital Communication Technologies Ltd

    Traditional waveform generators only provide simple, periodic waveforms. The circuits of today, however, require more complex and customized analog and digital stimulus signals. The CompuGen 4300 and CompuGen 4302 enable the user to generate a limitless number of analog and digital signals. The CompuGen 4300 and CompuGen 4302 generate analog output signals at a maximum D/A conversion rate of 300 million samples per second (MS/s) with 12 bit vertical resolution (4096 levels). Arbitrary waveforms are generated by creating a digital representation of the waveform in the memory on-board the CompuGen 4300/4302. This digital pattern is then converted into an analog signal using a high speed Digital-to-Analog Converter (DAC). The CompuGen 4300/4302 provide 4 channels of simultaneous data generation.

  • Analog Output Multifunction DAQ Cards

    DAQ-2500 Series - Digital Communication Technologies Ltd

    ADLINIK DAQ-2501 and DAQ-2502 are high-speed and high-performance analog output multifunction DAQ cards. The devices are able to update up to 8-CH, 12-bit analog outputs simultaneously at sustaining 1 MS/s. The reference sources and the output polarities are programmable on per channel basis, combining with the multiplying DAC architecture, ADLINK DAQ-2500 series DAQ cards can generate complex modulated analog signals. The hardware-based arbitrary waveform generation frees the CPU intervention even when all analog outputs are updating at full speed, and the lengths of waveforms are only limited by the system memory. The DAQ-2500 series integrate up to 8-CH, 400 kS/s, 14-bit single-ended analog inputs with programmable polarity, 24-CH programmable digital I/O lines, and 2-CH 16-bit general-purpose timer/counters.

  • Analog Output Multifunction PXI Modules

    PXI-2500 Series - Digital Communication Technologies Ltd

    PXI-2501 and PXI-2502 are high-speed, high-performance analog output multifunction PXI modules. These devices are able to update up to 8-CH, 12-bit analog outputs imultaneously sustaining 1 MS/s. The reference sources and output polarities are programmable individually per channel. Combine this with the multiplying PXI architecture, PXI-2500 series PXI modules can generate complex modulated analog signals. The hardware-based arbitrary waveform generation frees CPU intervention even when all analog outputs are updating at full speed, and the lengths of waveforms are only limited by the system memory. The PXI-2500 series integrate up to 8-CH, 400 kS/s, 14-bit single-ended analog inputs with programmable polarity, 24-CH programmable digital I/O lines, and 2-CH 16-bit general-purpose timer/counters.

  • ATX Motherboard With LGA1150 Socket 4th Gen Intel® Core™ Processor, Intel® Q87, USB 3.0, SATA 3.0, Dual LANs, DisplayPort, VGA, HDMI And MSATA

    IMB211 - Axiomtek Co., Ltd.

    The IMB211 is industrial-grade ATX motherboard with a full-range of integrated peripherals for general industrial and embedded applications. The IMB211 is based on 4th Generation Intel® Core™ i7/i5/i3/ Celeron® processors in LGA1150 socket with Intel® Q87 Express chipset. Four 204-pin DDR3-1333/1600 slots provide a maximum memory capacity of 32 GB to improve overall system performance. This industrial-grade high performance motherboard also supports Intel® Active Management Technology 9.0 (iAMT 9.0), SATA RAID, and triple-display capability through DisplayPort, HDMI and DVI-I interface. The board helps users to deploy more responsive, high-performance, graphic performance systems for advanced communication, gaming, industrial and automation applications.

  • Contact Resistance Meter

    PCRM200S - The Motwane Manufacturing Company

    The Motwane make Contact Resistance Meter (Model:PCRM200S) is a digital micro-ohmmeter, specially designed to measure extremely low resistance in micro ohm. The Instrument is based on Kelvin 4-wire connection method for measurement of low resistance.The Current injection is fixed at 100A & 200A. Test information like current injected with measured resistance & voltage drop is displayed with real time data on large LCD with backlit.This User friendly Instrument and it's accessories are housed in easy transportation case. Advanced Windows based software isprovided for data downloading, analysis and report generation. Internal memory of 199 records is provided for onsite data storage withDate & Time stamping & Recalling facility. Thermal printer is the additional feature provided to print the test results.

  • Digital Video Recorder

    Elbit Systems of America®

    Elbit Systems of America is the industry leader in video, audio, and data recorder's for fixed and rotary platforms. Our compact Digital Video Recorder (DVR) enables recording video and audio channels on a solid state memory cartridge. Based on commercial off-the-shelf components, the DVR complies with stringent airborne data recording and mission debriefing requirements. Each DVR’s advanced design has no moving parts assuring high reliability in all conditions. With built-in growth potential, it is configurable from one to four video channels and can accommodate additional communications. The unit operates as a stand-alone system or integrates with existing systems and upgrade programs. Elbit Systems of America provides advanced solutions for the following fixed-winged and rotary platforms:

  • Electrical Safety Testers

    STW-9900 Series - Texio Technology Corp.

    * 500VA AC Test Capacity* 240 x 64 Ice Blue Dot Matrix LCD* Manual/Auto Mode* Function Key for Quick Selecting* High Intensity Flash for Caution & Status Indication* Safety Interlock Function* Zero Crossing Turn-on Operation* Zero Crossing Turn-on Operation* True RMS Current Measurement * High Resolution : 1μA for Measuring Current, 2V for Setting Voltage* PWM Switching Amplifier to Enhance the Power Efficiency and Reliable Testing* Max. 100 Memory Block for Test Condition (Step) Setting. And Each Step can be Named Individually* Remote Terminal on the Front Panel for“Start”and“Stop” Control by External* Interface: RS-232C, USB Devise, Signal I/O and GP-IB (Option: OPT.1)