Filter Results By:

Products

Applications

Manufacturers

Showing recent results 1 - 13 of 13 products found.

  • OTR Systems

    OTR 1001 - OmniTek

    The Omnitek OTR systems offer a combined data analyzer and test signal generator in a rackmount format. The OTR 1001 system is provided in a 1RU format; the OTR 1003 is provided in a 3RU format. As data analyzers, the OTR systems offer full resolution picture monitoring; comprehensive SDI input status information; waveform, vectorscope and gamut displays; and SDI physical layer analysis including eye-pattern and jitter displays. As signal generators, they provide a full range of standard test patterns and zone plates; uncompressed video capture and play-out; gain, noise, bounce and jitter insertion; audio tones, timecode, WSS, video index and SMPTE 352 generation. The facilities offered have recently been enhanced through the addition of a Stereo 3D monitoring option, providing a comprehensive range of colorimetry and depth-analysis functions.

  • TDR Probe

    TDP Blade Probe - PacketMicro Inc.

    The TDP Blade Probe enables fast and convenient TDR measurements and debugging. The BladeProbe tips are made from strong and rigid beryllium copper blades for handheld and probe station probing. The passive probe can be used to measure impedance, clock jitters, and skews. The TDP BladeProbe series can be connected to TDR, high performance scopes, and vector network analyzers.

  • CPCI BUS Interface Card

    Cpci301 MIL-STD-1553 - Andor Design Corp.

    MIL-STD-1553 A, B & McAir MULTI PROTOCOLS Simulator / Analyzer / Tester CPCI BUS Interface Card - The CPCI301 can be used for Validation Testing, Production Testing, full bus simulation and monitoring, as a general purpose 1553 interface or a stand alone bus Analyzer. For precise message scheduling and measurements, the Major and minor frame times are independent of message sequences or retransmissions on errors and the start of all command messages are independent of message length, response time or length of response. Message timing is calibrated and RT responses have low jitter.

  • TS Analyzer

    TS-7815 - K-WILL Corp.

    The TS-7815 is user friendly and its light compact design (3U half rack), alarm function and flash memory are special added features that distinguishes it from other TS analyzers. Measurement features include TS bit rate measurement, PID list display, program tree display, PCR jitter measurement, and PTS/DTS analysis (no PC required). Any basic element of the TS can be analyzed in real time.

  • E1/Datacom Transmission Analyzer

    DTA-BERT - ShinewayTech

    DTA-BERT E1/Datacom Transmission Analyzer can perform E1 transmission performance test (BERT) and status monitoring on data link (V.35, V.24/RS232, RS449, RS530, X.21). Model T can also perform G.703-64K bit error test, PCM31/30 test and Jitter test. Featuring comprehensive functions, easy operation and compact design, DTA-BERT provides total solutions for E1 line analysis and maintenance.

  • E1 Transmission Analyzer

    ST-2125 - Wuhan Sunma Technologies Co., Ltd.

    ST2125 E1 Transmission Analyzer is a powerful handheld instrument, providing a scalable, future-proof solution for the testing needs of technicians involved in the installation and maintenance of E1 digital networks. It offers full-featured the error and alarm measurements you will need to verify quality-of-service in your networks. Plus, signal quality measurements including frequency, level, pulse shape, jitter and other functions ensure your costly, time-consuming work performed quickly and efficiently.

  • EMI/EMC Measurements, Phase Noise, Physical Layer Test

    Keysight Technologies

    From precompliance measurements and EMC diagnostics to full compliance testing, Keysight has an EMI measurement solution for youPhase noise measurement solutions Offer flexible testing of VCOs, DROs, crystal oscillators, synthesizers, amplifiers, converters, and measurement of CW, pulsed and spurious signalsSignal Source Analyzer – offers the highest measurement throughput and best usability in characterizing VCO or other types of high frequency signal sources, as well as clock jitter evaluation in high-speed data communication systems.

  • PCI BUS Interface Card

    PCI301 - Andor Design Corp.

    MIL-STD-1553 A, B & McAir MULTI PROTOCOLS Simulator/Analyzer/Tester PCI BUS Interface Card - The PCI301 can be used for Validation Testing, Production Testing, full bus simulation and monitoring, as a general purpose 1553 interface or a stand alone bus Analyzer. For precise message scheduling and measurements, the Major and minor frame times are independent of message sequences or retransmissions on errors and the start of all command messages are independent of message length, response time or length of response. Message timing is calibrated and RT responses have low jitter.

  • Type 2, PCMCIA Dual Redundant MIL-STD-1553 serial bus Simulator Analyzer Tester

    PC401 - Andor Design Corp.

    MIL-STD-1553 A, B, & McAir MULTI PROTOCOLS Simulator/Analyzer/Tester type 2 PCMCIA BUS Interface Card - The PC401 can be used for Validation Testing, ProductionTesting, full bus simulation and monitoring, as a generalpurpose 1553 interface or a stand alone bus Analyzer. Forprecise message scheduling and measurements, the Majorand minor frame times are independent of messagesequences or retransmissions on errors and the start of allcommand messages are independent of message length,response time or length of response. Message timing iscalibrated and RT responses have low jitter.

  • ISA Bus Dual Redundant MIL-STD-1553 A/B Simulator / Analyzer / Tester

    CIC101-4 - Andor Design Corp.

    Price: Request QuoteMIL-STD-1553 A, B Simulator/Analyzer/Tester ISA BUS Interface Card. The CIC101 can be used for Validation Testing,Production Testing, full bus simulation and monitoring, as ageneral purpose 1553 interface or a stand alone bus Analyzer. It provides precise message scheduling andmeasurements. Major and minor frame times areindependent of message sequences or retransmissions onerrors. The start of all command messages may be set to beindependent of message length, response time or length ofresponse. The CIC101 features a calibrated Message timingand low jitter RT responses.

  • MIL-STD-1553 A, B Simulator/Analyzer/Tester

    CIC201 - Andor Design Corp.

    MIL-STD-1553 A, B Simulator/Analyzer/Tester - CIC201B VME/VXI B Size Interface, CIC201C VME/VXI C Size Interface - The CIC201 can be used for Validation Testing, Production Testing, full bus simulation and monitoring, as a general purpose 1553 interface or a stand alone bus Analyzer. For precise message scheduling and measurements, the Major and minor frame times are independent of message sequences or retransmissions on errors and the start of all command messages are independent of message length, response time or length of response. Message timing is calibrated and RT responses have low jitter.

  • Compact PhyView Analyzer

    PVA-3002 - Sifos Technologies, Inc.

    Sifos Technologies offers the PhyView Analyzer Compact PVA-3000 supporting the highly innovative and fully automated 10/100/1000 PHY Performance Test Suite covering transmitter, receiver, and auto-neg behaviors of any 10/100/1000Base-T interface. Alternative to Standard Ethernet Compliance Testing with Innovative, Cost-Effective, Plug’n Play Verification of Ethernet 10/100/1000 Base-T Interfaces. Unmatched Automation and Simplicity.Compact and transportable 2-port configuration with same testing features as the PVA-3000. Key features include:• Comprehensive Physical Layer Testing at the RJ-45 Interface• 100/1000Base-T Transmitter Testing WITHOUT Costly Scopes, Probes, Fixtures, and PHY Test Signals​• Accelerated Receiver Testing with Versatile Physical Impairments​​ including Insertion Loss, Alien Crosstalk, and Jitter• Basic 10/100/1000 Auto-Neg Evaluation​• Faster and More Informative Alternative to Packet Testing• Unique and Innovative Metrologies including Tx Power, Power Spectral Distortion, SNR, Wideband Return Loss, Wideband Crosstalk• Combine with PowerSync Analyzer to Assess PSE Physical Layer Peformance while Powering PD's• Fully Certified Commercial Test Instrument, Extensively Documented

  • PhyView Analyzer

    PVA-3000 - Sifos Technologies, Inc.

    Sifos Technologies offers the PhyView Analyzer PVA-3000 multi-slot chassis supporting the highly innovative and fully automated 10/100/1000 PHY Performance Test Suite covering transmitter, receiver, and auto-neg behaviors of any 10/100/1000Base-T interface. Alternative to Standard Ethernet Compliance Testing with Innovative, Cost-Effective, Plug’n Play Verification of Ethernet 10/100/1000 Base-T Interfaces. Unmatched Automation and Simplicity.Connects up to 24 10/100/1000Base-T ports and provides access to the PHY Performance Test Suite supporting one-click, fully automated transmitter, receiver, and, auto-neg testing.Key Features• Comprehensive Physical Layer Testing at the RJ-45 Interface• 100/1000Base-T Transmitter Testing WITHOUT Costly Scopes, Probes, Fixtures, and PHY Test Signals​• Accelerated Receiver Testing with Versatile Physical Impairments​​ including Insertion Loss, Alien Crosstalk, and Jitter• Basic 10/100/1000 Auto-Neg Evaluation​• Faster and More Informative Alternative to Packet Testing• Unique and Innovative Metrologies including Tx Power, Power Spectral Distortion, SNR, Wideband Return Loss, Wideband Crosstalk• Combine with PowerSync Analyzer to Assess PSE Physical Layer Performance while Powering PD's Fully Certified Commercial Test Instrument, Extensively Documented