Showing results 1 - 15 of 155 products found.
-
D.A. / Selector / Matrix - AVLINK TECHNIC TAIWAN CO., LTD.
Is a proprietary audio/video interface for transferring uncompressed video data and compressed or uncompressed digital audio data from an HDMI-compliant source device, such as a display controller, to a compatible computer monitor, video projector, digital television, or digital audio device.[4] HDMI is a digital replacement for analog video standards.
-
B-SDI-HDMI - QuestTel
QuestTel''s 3G/HD/SD-SDI to HDMI mini Converter adopts Video Through Technology, delivering clear and vivid pictures on your HDMI displays. Supports auto resolution detection of 3G-SDI, HD-SDI and SD-SDI. Embedded SDI/HD-SDI audio is supported in the HDMI output allowing a convenient single cable audio/video connection. Supports resolutions up to 1080p.
-
21-8575-00 - LANTAC Techtronics Co. LTD
The HDMI Tester is designed to provide fast convenient verification of proper pin connections of HDMI cables and wall plates. The set includes a Main Test Unit and Remote Test Receiver.
-
4K 1X2 Port - AstroAI Corp.
AstroAI 4K 1X2 Port HDMI Splitter Amplifier HDCP Ver 1.4 Certified Support 3D 1080P with Power Adapter
-
1B-HDMI-W-TX/RX - QuestTel
QuestTel''s long range wireless HDMI Transmitter/Receiver kit fully compliant with HDCP, extends high definition audio and video to any HDTV display up to 650 feet (up to 200 meters). It supports HD resolutions up to 1080p. Wirelessly transmit the HDMI signal to any HDTV over the AIR, it also supports IR remote control function to control source device content from long distance.
-
ST-C6HD-HDBT - Network Technologies Inc
The XTENDEX® HDMI HDBase-T Extender transmits uncompressed digital HDMI signal and IR up to 328 feet over a single CAT5e/6/7 cable using HDBase-T technology. Each video extender consists of a local unit that connects to an HDMI source and a remote unit that connects to an HDMI display.
-
980 - Teledyne LeCroy quantumdata
The 980 Protocol Analyzer and compliance test tool provides full visibility into the HDMI and MHL protocol, timing, control and auxiliary data at HDMI 1.4a speeds. There are two 980 product options available: 1) the 980 225MHz ("Gen 2") and 2) the 980 297MHz ("Gen 3"). The 980 225MHz option offers analysis of HDMI source devices at TMDS clock rates up to 225MHz. The 980 297MHz option offers analysis of HDMI and MHL source devices at TMDS clock rates up to 297MHz (HDMI).
-
ST-C6HD-150-LC - Network Technologies Inc
The XTENDEX® Low-Cost HDMI Extender transmits digital video and audio signals up to 150 feet using one CAT5e/6 cable. Each video extender consists of a local unit that connects to an HDMI source and a remote unit that connects to an HDMI display.
-
Allion Test Labs, Inc.
HDMI Load Board is specifically designed for HDMI Compliance Specification Test 1.3 Electrical test. It aims to accurately and effectively conduct the pre-tests on HDMI products. It also can assisthelp customers to reduce cost from purchasing a special fixture "SMA Probe."
-
PR-19 - Pansco, Ltd
The new HDMI Cable Tester quickly and easily tests an HDMI cable from both ends, verifies the connectors’ pin configuration, and confirms the integrity of the fragile internal wires. If a cable contains a wiring fault, the HDMI Cable Tester identifies it as an open, a short, or a reverse – not simply the “pass” or “fail” that most testers report.
-
VA-1809A - Astrodesign Inc.
VA-1809A is protocol analyzer used to inspect/measure various HDMI (High-Definition Multimedia Interface) signal functions meet interface standards for digital AV equipment. It visually confims operation status for each HDMI input picture signal function. This has been designed to meet the needs of various applications like; HDMI repeater, receiver function, CEC command control, remote control, etc. this unit provides the best mobility and effciency for developing, experimenting and maintaining with digital AV equipment having an HDMI interface.
-
43062 - LINDY-Elektronik GmbH
This HDMI cable tester is a compact, palm sized unit for testing HDMI cables. It can be used to read and check the pin-out configuration of cables before and after installation. A separate passive module is included for remote testing of pre-installed cables.
-
VA-1838 - Astrodesign Inc.
Testing HDMI 4Kx2K timings, 3D, ARC, CEC, HDCP function.
-
MT-7062 - Prokit's Industries Co., Ltd.
Test all HDMI cables with Type A to A, A to C and C to C connectorsDesign with loopback function allows test HDMI type A to A, A to C on main unit.Automatically fast & slow scan for testing all conductors status in a cable, Manual test for step by step detecting individual conductors for intermittent faults.Automatically detect wiring on HDMI type A or type C condition in straight, short, open, crossover in all RGB conductors.Quickly troubleshoot and verify HDTV installation and DIY termination in the field.
-
TE460-137 - ALTINEX, Inc.
This portable HDMI Signal Generation and Analysis tool provides a convenient way to test and verify all aspects of an HDMI signal path, including source and sink. This unit complies with the HDMI 2.0a and HDCP 1.4/2.2 standards. The unit’s Analyzer mode complies with the CEA standard HDR static metadata extensions CEA-861-F and CEA-861.3 for EDID analysis.
