Showing results: 1126 - 1140 of 6459 items found.
-
HDS2062M -
Xiamen Lilliput Technology Co., Ltd
Owned stable test equipment, which convenient and easy-readable during the complicate on-site system is a visible necessity for all engineers. Our handheld digital storage oscilloscope HDS Series is born to match this kind of need. The oscilloscope with 20MHz to 60MHz bandwidth and the sample rate at 100MS/s to 250MS/s in dual Channel and combine with the function as multimeter. With HDS Series you will be confident in solving all troubles efficiently and correctly during on-site occasion. Meet your best need is our mission.
-
GX5290 -
Terotest Systems Ltd.
The GX5290 Series are a high performance, cost-effective 3U PXI dynamic digital I/O boards offering 32 TTL or LVDS input or output channels with dynamic direction control. The GX5290 Series also supports deep pattern memory by offering 256 MB of on-board vector memory with dynamic per pin direction control and with test rates up to 200 MHz. The single board design supports both master and slave functionality without the use of add-on modules.
-
VPE-2000 -
Superior Signal Company
The Superior AccuTrak VPE-2000 is the first digitally controlled ultrasonic detector. Like two instruments in one it uses two independent sensors supported by separate electronic circuits configured specifically to their own sensor. This assures optimum sound clarity and frequency response. When switching between the airborne and contact sensors all settings are retained in memory! Digital LED meters let you establish baselines, perform trending, and accurately repeat these tests better than older more expensive analog instruments.
-
HD9817T… Series -
Delta OHM S.r.L.
Dual relative humidity and temperature transmitter for HVAC applications, environmental monitoring, pharmaceutical storage, food transport, greenhouse automation, etc. Equipped with an IP65 stainless steel AISI 304 housing, it is suitable even for severe environments; besides, its ultra-compact dimensions (Ø 14 x 133 mm) and wide range of outputs (analogue 0…1V, digital RS232C OR RS485-MODBUS RTU, USB 1.1-2.0) make it ideal for integrating into a variety of OEM applications. It is supplied with the HD9817TC software for reading measurements and calibrating the relative humidity sensor.
-
AMETEK Sensors, Test & Calibration
We provide some of the world’s most popular XP2i digital test gauges for a variety of applications and markets. Included are intrinsically safe "percent of reading" gauges, process gauges, differential pressure gauges, panel mounted gauges, and gauges specifically designed for use in the maritime industry. Whether you’re looking for a gauge with long battery life to mount in hard to reach locations, a gauge to collect and store readings in the field in extreme conditions, or one that doesn’t require recalibration for up to three years, we have the perfect gauge for you.
-
MM68 -
Martindale Electric Co. Ltd
The MM68 is a True RMS digital multimeter which measures AC voltage up to 750V, DC voltage up to 1000V and both AC and DC current up to 10A.
It measures frequency, capacitance, resistance, and also has duty cycle, diode test and an audible continuity test which sounds at less than 100Ω. The 4½ digit LCD screen displays the results as values and on a 22 segment analogue bar graph. The MM68 also has an auto-power off feature and on screen low battery indication.
-
Hydrotechnik UK Ltd
Our comprehensive range of hydraulic pressure testing equipment is of the highest quality and makes hydraulic testing much easier and extremely accurate. 75mm digital pressure gauges with 0.5% accuracy up to 600 bar. Numerical & 0-100% bar graph display. Min/max storage. 2 x AA batteries. Stylish pressure switch / gauge up to 700 bar with two settable switch values. 4-20mA output. 15...30Vdc external power required. LED high speed panel mounting displays for frequency or analogue signals.
-
2553 -
B&K Precision Corporation
The 2550 Series digital storage oscilloscopes deliver performance and value in 2-channel and 4-channel configurations. With bandwidth from 70 MHz to 300 MHz and 2 GSa/s sample rates, these oscilloscopes offer 24 kpts/Ch waveform memory, 32 automatic measurements, and advanced triggering capabilities including math functions. Engineered to allow you to see more of your signal under test, the 2550 series’ widescreen 7” TFT display offers a significantly larger viewing area than typical economy oscilloscopes (5.7”).
-
TH2512 -
Shenzhen Chuangxin Instruments Co., Ltd.
The TH2512 series digital dc low resistance tester i s an intelligent, wide range, high-precision tester which suitable for transformer, inductor copper resistance, relay contact resistance, switches, connectors, wire resistance, contact resistance component solder contact resistance, PCB line, welding hole resistance and metal detection, etc. It’s applied to the production line and can use HANDLER interface and GPIB interface (option) output good/bad signal, in order to improve production line automation testing capability.
-
2712 EL -
Standard Electric Works Co., Ltd
● Microprocessor-controlled.● 2 Lines × 16 characters LCD.● Very low consumption.● 50Hz and 60Hz operation.● Menu-driven.● Accurate digital readout of disconnection time.● Automatic data hold function.● Over temperature protection.● Over voltage protection.● Fuse protection.● Zero crossing circuitry permit testing at 0° or 180°.● Disconnection phase polarity shown on LCD display.● Auto off and off override.● Polarity trip indicator (positive or negative phase)● Wiring polarity indicator.● Measure voltage between Line and Earth before testing.● Frequency measurement indication.
-
Replica -
Jacobs
The next frontier of technological advancement is not new treatment processes or equipment, but instead lies in dynamic process simulation models, advanced visualization techniques, and/or data-driven analysis, leveraged through that can be used for process analysis and project optimization.Digital twins allow solutions to be investigated and tested without putting equipment, public health or the environment at risk. These realistic simulations of facility behavior allow organizations to assess “what if” scenarios in the digital domain and solve for some of the most perplexing challenges, before they can occur — enhancing system understanding and achieving improved system design, optimized operations performance and reduced capital and operating costs.
-
SYNTH300 SERIES -
Ultraview Corporation
These devices provide two synchronized DDS-based RF channels on a single PCI card. With fine frequency and phase control, triggered operation, and the ability to accept an external clock, the Synth300 products enable a number of advanced applications at a fraction of the cost of conventional equipment. In addition to two analog outputs, the product can be ordered with one (or two) LVDS outputs for programmable digital clock applications, and can be configured for control by externally supplied TTL signals for low-latency triggered operation such as PSK, FSK, and triggered sweep operation.Software support for Windows Vista, Windows XP,Linux and Labview source code availableFor detailed specifications, please refer to the Synth300_Manual
-
U1252B -
Keysight Technologies
The Keysight U1252B 4.5-digit handheld digital multimeter (DMM) is feature-packed to simplify the troubleshooting of electronics and electrical circuits on the bench or in the field. Key capabilities include manual and automated data logging to both DMM and PC. For those long, continuous measurements, the DMM equips you with the easy-to-use GUI data-logging software to automate virtually unlimited data recordings to PC. The U1252B comes with an integrated 20 MHz frequency counter for high frequency measurements, and a built-in programmable square-wave generator with selectable frequency and duty cycle. With the versatile U1252B, you are well equipped to perform thorough troubleshooting of any faulty circuit.
-
PDS5022 -
Xiamen Lilliput Technology Co., Ltd
PDS series portable digital storage oscilloscopes embody completely the perfect combination of capability, speed and analysis. With 40-100M bandwidth, 250M S/s realtime sample rate on each and dual channels storage, PDS series would be the ideal instrument for design, maintenance and detection. 250M realtime sample rate for each channelManual Cursor Measurement; 5 automatic measurements; High-speed screen update, Saving 4 Waveforms & setup parameters; plenty of Manual Cursor Measurement, Long memory max 6KBytes/CH,Convenient inserting interface card for RS-232C, Hardcopy and USB; 400V (DC+AV peak) maximum input power; Multilanguage offered for user's convenience Specification
-
4109 -
M. C. Miller Company
The voltmeter included in the kit, the “Model DPM” voltmeter, is designed for ease of use by meter readers and corrosion technicians alike and the voltmeter comes with an integrated RE-5 reference electrode attached for “metallic structure-to-soil” potential difference readings. The kit also includes a special test lead that has a brass thumb screw on one end which allows the test lead to substitute for the RE-5 reference electrode. This substitution allows the voltmeter to take “structure-to-structure” potential difference readings. The voltmeter offers two ranges, ±2VDC and ±20VDC with a 20MΩ input impedance. Since the voltmeter is digital [in contrast to the meter in our analog tank test kit (Cat. # 4108)], both negative and positive voltages are displayed. `
