Filter Results By:

Products

Applications

Manufacturers

Showing results: 3181 - 3195 of 5211 items found.

  • Rugged Door Contact Sensor

    ENVIROMUX-DCSR - Network Technologies Inc

    Monitors access with a magnetic bridge sensor (no special inserts necessary). Ideal for commercial and industrial installations in harsh environments. Heavy-cast aluminum housing with 18-inch stainless steel armored cable. Floor-mounting hardware included. For normally open or normally closed circuit connection. Wide actuating gap, approximately 3". Maximum cable length: 1,000 ft (305 m). Dimensions WxDxH (in): Magnet: 3.5x1.5x1.5 (89x38x38 mm), Switch: 3.5x1.5x0.44 (89x38x11 mm). Regulatory approvals: UL.

  • TAP Detectors And Power Monitors

    Go!Foton Corperation

    The “Premium” jumpers are VZ TPR Certified Cables that provide the highest level of reliability. We also offer the high performance “Standard” jumpers that are Telcordia GR 326 tested and certified. Both the Premium and Standard cables are made in our state of the art manufacturing facility recognized by leading global service providers as one of the best in the industry. We attribute our success to the highly dedicated and skilled production team which starts by selecting only the highest quality fiber and connector components.

  • 200-Pin LFH Connector Block, Male

    92-965-200-M - Pickering Interfaces Ltd.

    Suitable for use on the front of PXI modules this connector block provides a simple method of connecting to high density 200-Pin LFH connectors. The screw terminals use a rising cage screw clamp mechanism to minimize risk of copper strand breakage. PTFE cables are recommended for use with this connector block to maximize copper cross sectional area and insulation properties. Users should make their own cable strain relief arrangements and ensure that appropriate electrical safety precautions are observed.

  • ITA, I2 Micro ICon, 120/12 Position Hybrid

    410130104 - Virginia Panel Corporation

    The i2 Micro iCon ITA is capable of holding up to 120 QuadraPaddle contacts and up to 12 Micro Power or Micro Coax contacts. Its sleek, 0.8” footprint increases the horizontal stackability. The 30 degree U-shaped cable clamp allows ITA modules to be pre-wired before assembly and can hold cable bundles with an oblong bushing effective diameter of 0.77 in. The removable cover allows easy access to wiring for maintenance and probing. Integrated spring locking tabs ensure even and secure engagement.

  • OTDR Automation Software

    OASYS.net - Photon Kinetics

    Both the 1000i and 1000 OTDR Automation Systems consist of a suite of PK products that accelerate and simplify several time- consuming activities that are a common to the OTDR testing process in cable manufacturing. The cornerstone of both systems is the OASYS.net OTDR Automation Software. OASYS.net provides cable manufacturers with the ability to define comprehensive OTDR testing strategies, to execute these strategies to automatically acquire and analyze the OTDR data, and then organize and package the large quantity of test data in a form that is compatible with existing factory information systems.

  • Universal Locator

    UL 30 - BAUR Prüf- und Messtechnik GmbH

    Cable fault location with the BAUR UL 30. The UL 30 receiver is used together with a ground microphone (BM 30) and a surge voltage generator (SSG, STG) to pinpoint cable faults. With the coil integrated in the BM 30 for runtime measurement, the device determines the time difference between the magnetic and acoustic signal. This particularly offers special advantages when d ealing with faults difficult to locate acoustically.* Built-in speaker* Splashproof design* Large, illuminated display* Lightweight

  • Audio Frequency System

    Locator Set / UL 30 - BAUR Prüf- und Messtechnik GmbH

    Cable fault location with the BAUR Locator Set / UL 30. The audio frequency system Locator Set is used to exactly determine the alignment of cables and metal gas or water pipes. With various accessories, this system becomes a universal, indispensable device for power companies, industries, installation companies and water suppliers.* Output energy up to 50 VA* Automatic or manual impedance adjustment* Charging unit and rechargeable battery integrated; battery or mains operation* Continuous or cyclical output

  • Connector Block, 50-Pin D-Type, Female

    40-965A-050-F - Pickering Interfaces Ltd.

    The 40-965A-050-F connector block provides a simple method of connecting to 50-Pin D-Type connectors. The screw terminals use a rising cage clamp mechanism to minimize risk of copper strand breakage. PTFE cables are recommended for use with this connector block to maximise copper cross-sectional area and insulation properties. Connector blocks have higher losses than a cable connection and the breakdown voltage is controlled by clearances to the metal shell. The metal shell includes an internal insulation barrier under the carrier board.

  • 25-Pin D-Type Male Connector Block

    40-965-025-M - Pickering Interfaces Ltd.

    This connector block provides a simple method of connecting to 25-Pin D-Type connectors. The screw terminals use a rising cage clamp mechanism to minimize risk of copper strand breakage. PTFE cables are recommended for use with this connector block to maximise copper cross-sectional area and insulation properties. Connector blocks have higher losses than a cable connection and the breakdown voltage is controlled by clearances to the metal shell. The metal shell includes an internal insulation barrier under the carrier board.

  • 25-Pin D-Type Female Connector Block

    40-965-025-F - Pickering Interfaces Ltd.

    This connector block provides a simple method of connecting to 25-Pin D-Type connectors. The screw terminals use a rising cage clamp mechanism to minimize risk of copper strand breakage. PTFE cables are recommended for use with this connector block to maximize copper cross-sectional area and insulation properties. Connector blocks have higher losses than a cable connection and the breakdown voltage is controlled by clearances to the metal shell. The metal shell includes an internal insulation barrier under the carrier board.

  • Remote & Local Continuity Tester

    Extech CT20 - Extech Instruments Corporation

    The CT20 is an electronic tool for electricians, alarm, cable installers and others who routinely need to check circuits for continuity and also identify cables and wires. It allows a single user to quickly identify and label two wires even when the wire ends are located in different rooms. It can accommodate test wire lengths up to 10,000-feet (3,000 meters), 26-gauge minimum. The CT20’s Remote Continuity mode allows the user to check continuity and to identify two or more cables/wires simultaneously.

  • Test Kits

    Optical Wavelength Laboratories

    Deluxe color LCD fiber link certifier (includes MASTER and REMOTE devices) Tests two fibers at a time, cutting testing time in half (when compared to traditional fiber certification) Ideal for installers and contractors who need to certify fiber cables BI-DIRECTIONALLY Measure the end-to-end length of the fiber cable with every test Unlimited sets of job parametersOWLView software allows tri-report capability certification, OTDR, and endface all on one report) Multimode and singlemode options available.

  • AC Insulation Testing

    Megger Group Ltd.

    AC insulation tests are a popular response to the increasingly demanding industrial, power and domestic marketplaces. Insulation materials have had to become more efficient to keep up with demand; more efficient equipment requires less insulation material to meet the minimum acceptable value of insulation resistance. In turn, cables have become smaller and lighter. However, under certain higher stress testing conditions such as DC testing, cables like Crossed Linked Polyethylene (XLPE) can quickly degrade.

  • Insertion Probes for Water Activity Measurement

    Rotronic Measurement Solutions

    The Insertion Probe is the part of the Inspection Camera that is inserted into the machinery in question. Also called an Insertion Tube, Insertion Probes are often subjected to deterioration and wear-and-tear from the inhospitable environments found inside industrial machines. Insertion Tubes can contain data cables, articulation cables, and sometimes even a Working Channel. Tungsten, Stainless Steel, and Polyethylene are the three most common materials used to coat Insertion Probes to make them crack resistant, puncture resistant, and even heat resistant.

  • Fault Locator

    VM-510FFL+ - Vivax-Metrotech Corp

    Finding the location of an underground cable fault just became easier with the VM-510FFL+ Standalone A-frame locator. Now locating a suspect cable and finding the fault can be done with the VM-510FFL+ and a compatible transmitter. There is no longer a need for a separate utility locator with cables connecting to it. After connecting a compatible transmitter to the line and placing it in a Fault-Find mode, use the simple to operate four button controls of the VM-510FFL+ to locate and stay on the cable path while pinpointing the sheath or ground fault.

Get Help