Filter Results By:

Products

Applications

Manufacturers

Showing results 1 - 15 of 49 products found.

  • Battery Charge Discharge Cycle Test

    Elite Power Solutions Co.Ltd

    battery formation; battery ageing; battery capacity testing20V5A 10V5A 5V20A 5V20A 5V10A 5V6A 5V3A

  • Battery Charge Discharge Cycle Test Equipment

    Elite Power Solutions Co.Ltd

    battery formation; battery ageing; battery capacity testing20V5A 10V5A 5V20A 5V20A 5V10A 5V6A 5V3A

  • Charge Discharge Ampere Hour Meter

    IM2507 - Ajinkya Electronic Systems

    IM2507 is a charge discharge type Ampere Hour meter which has two independent 4 digit displays for separate charge and discharge counting. While one display counts the charge through the circuit, the other counts the discharge.These are useful in battery life cycle testing, battery monitoring applications.

  • Battery Monittoring Ampere Hour Meter

    IM2505 - Ajinkya Electronic Systems

    IM2505 is a charge discharge type Ampere Hour Meter which is useful for tracking / monitoring battery AH in circuit.These are used in applications related to submarine and telecom or in these sectors where battery back ups are used and battery charge is to be monitored to switch on and off charger and load to avoid excessive charging as well as deep discharge.

  • Battery Charger-Analyzer for small battery systems (up to 10A-Hr)

    miniMasterCharger - JFM Engineering

    The miniMasterCharger is an instrument designed to charge, trickle charge and analyze (discharge) Nickel-Cadmium, Sealed Lead-Acid and other types of rechargeable batteries.With its multiple modes of operation of Constant Current Charge (dual and single rate), Constant Current & Float Charge, Constant Current & Peak Stop Charge, Automatic Discharge (analysis), Resistance Discharge (analysis) and Full Discharge (deep cycle), the miniMasterCharger can satisfy the requirements of most small (0 to 10 A-hr) rechargeable battery systems.The instrument features safety interlocks to protect the operator, the charger and the battery in the event of reversed polarity connection, short circuit, open circuit (no load) and Overvoltage conditions.

  • Battery Simulator Model

    A170202 - Chroma Systems Solutions, Inc.

    Multichannel battery packs state simulation.Follow the battery cell curve behavior to simulate battery state.Able to set frequently used parameters for battery pack and rapidly customize initial output state.Regenerative battery energy discharge function, power saving, environment-friendly and low heat output with 85% efficiency.Up to 60 channels can be paralleled for large current request.Operating mode: Constant Current/Constant Voltage/Constant Power discharge 600W, 1.25kW, 2.5kW, 5kW,10kW, 20kW, 30kW, 50kW, 60kW power per channel 20V, 60V, 100V, 200V and 500V voltage modules 2600A maximum current (paralleled)Dynamic current charge and discharge simulation.Highly accurate current and voltage measurement.Smooth and rapid current charge and discharge switching without interruption.Current smooth without surge when altering charge and discharge mode (CC-CV-CP).Independent channel protection function.

  • Battery Intelligent Activator

    CR-IA2612/10 - Shaanxi Criane Electronics Co., Ltd

    CR-IA Battery Intelligent Activator is a portable product to active poor battery. It has three functions: discharge, charge and activation. According to the actual situation of different poor battery, it can make capacity test, make low voltage constant current charging, or set up multiple cycles against to minimum capacity battery to do pulse charge and discharge, to activate the failed active material and to increase capacity of the poor battery. It also equipped the PC software, to upload the data to computer for analysis.

  • WizardOne Battery Charger-Analyzer for 4 AA / AAA

    MH-C9000 - Maha Energy Corporation

    It's like having four charger-analyzers for AA and AAA NiMH / NiCD batteries. Refresh & Analyze: Charges the battery, rest for one hour, discharge, rest again, then recharges it. Selectable charging and discharging rate. Break-In: Also known as IEC capacity measurement and "Battery Forming". Charges battery at 0.1C for 16 hours, rest for one hour, discharges battery at 0.2C, then recharges again at 0.1C for 16 hours.

  • Battery Charger-Analyzer for small battery systems (up to 10A-Hr)

    24-400xg - JFM Engineering

    The 24-400XG is an instrument designed to charge, trickle charge and analyze (discharge) Nickel-Cadmium, Sealed Lead-Acid and other types of rechargeable batteries.With its multiple modes of operation of Constant Current Charge (dual and single rate), Constant Current & Float Charge, Constant Current & Peak Stop Charge, Automatic Discharge (analysis), Resistance Discharge (analysis) and Full Discharge (deep cycle), the 24-400XG can satisfy the requirements of most small (0 to 10 A-hr) rechargeable battery systems.The instrument features safety interlocks to protect the operator, the charger and the battery in the event of reversed polarity connection, short circuit, open circuit (no load) and Overvoltage conditions.Two large LED digital meters permit the simultaneous monitoring of voltage and current, while eight indicator lights inform of the status of the operation.

  • Intelligent Battery Charger-Analyzer for Battery Systems

    SuperMini - JFM Engineering

    The SuperMini is an instrument designed to charge, trickle charge and analyze ( discharge ) Nickel-Cadmium, Sealed Lead-Acid and other types of rechargeable batteries. With its multiple modes of operation: Constant Current Charge ( dual and single rate ), Constant Current & Float Charge, Constant Current & Peak Stop Charge, Automatic Discharge ( analysis ), Resistance Discharge ( analysis ) and Full Discharge ( deep cycle ). The SuperMini can satisfy the requirements of most ( Up to 40 A-hr ) rechargeable battery systems. The instrument features safety interlocks to protect the operator, the charger and the battery in the event of reversed polarity connection, short circuit, open circuit ( no load ) and Over-voltage conditions. Two large LED digital meters permit the simultaneous monitoring of voltage and current, while eight indicator lights display the status of the operation.

  • Intelligent Battery Charger-Analyzer for Large Battery Systems

    SuperMasterCharger - JFM Engineering

    The SuperMasterCharger is an instrument designed to charge, trickle charge and analyze ( discharge ) Nickel-Cadmium, Sealed Lead-Acid and other types of rechargeable batteries. With its multiple modes of operation: Constant Current Charge ( dual and single rate ), Constant Current & Float Charge, Constant Current & Peak Stop Charge, Automatic Discharge ( analysis ), Resistance Discharge ( analysis ) and Full Discharge ( deep cycle ). The SuperMasterCharger can satisfy the requirements of most large ( 10 A-hr to 100 A-hr ) rechargeable battery systems. The instrument features safety interlocks to protect the operator, the charger and the battery in the event of reversed polarity connection, short circuit, open circuit ( no load ) and Over-voltage conditions. Two large LED digital meters permit the simultaneous monitoring of voltage and current, while eight indicator lights display the status of the operation.

  • Battery Test Systems

    Chroma Systems Solutions, Inc.

    These high precision, integrated battery test systems are designed for lithium ion and other chemistries and applications including EV batteries and energy storage systems. From R&D to battery production, Chroma’s battery test equipment provides advanced features including regenerative discharge systems that recycles energy from the battery back into the channels in the system or to the grid. Systems are configurable and flexible with multiple channel capabilities that can be upgraded as testing requirements change. In addition, the test system the finds charge rates, discharge rates, states of charge (SOC), states of health (SOH), and depths of discharge (DoD) with accurate measurements in voltage, current, temperature and power – statically and dynamically.

  • Regenerative Battery Pack Test System

    17040 - Chroma Systems Solutions, Inc.

    The 17040 Regenerative Battery Pack Test System is a high precision system specifically designed for secondary battery module and battery pack test. It has an energy regenerative function to greatly reduce power consumption during discharge, and ensure a stable power grid without generating harmonic pollution on other devices even in dynamic charge and discharge conditions. It is capable of recycling the energy discharged by the battery pack test back to the grid reducing wasted energy that traditional equipment discharges in the form of heat.

  • Battery Charge-Discharge Monitor

    CR-CFJ - Shaanxi Criane Electronics Co., Ltd

    CR-CFJ Battery Charge-Discharge Monitor is a multi-function monitor with charge, discharge and online monitor. It can reduce the company’s cost and labor strength of maintain personnel, also provide a total scientific testing ways for battery and power supply maintenance. The battery Charge-Discharge Monitor is the best assistance of battery maintenance.

  • Potentiostat/Galvanostats

    Powerstat series - NuVant Systems, Inc.

    The Powerstat-05, Powerstat-20, Powertest-05 and Powertest-20 are high performance potentiostat/galvanostat instruments capable of delivering 5 and 18 amps, respectively. The Powerstat series are ideal for high current electrosynthesis, fuel cells, complex battery charge discharge cycling and more.