Showing recent results 886 - 900 of 3216 products found.
-
RT-Lube - Micromem Inc.
Instrument platform that is capable of real time, on site detection of wear elements in lubricating fluids. Currently the process to test lubricants is to take a manual sample for lab testing. This approach is expensive, labor intensive and time consuming. The RT-Lube Analyzer can replace this manual approach by automatically sampling, on a pre-scheduled basis, the fluid under consideration. The analysis is immediate and is communicated back to cloud based storage systems where the analytics can take place.
-
TCi - C-Therm Technologies Ltd.
The default C-Therm TCi Thermal Conductivity Analyzer employs the Modified Transient Plane Source (MTPS) technique in characterizing the thermal conductivity and effusivity of materials. It employs a one-sided, interfacial heat reflectance sensor that applies a momentary constant heat source to the sample. Typically, the measurement pulse is between 1 to 3 seconds. Thermal conductivity and effusivity are measured directly, providing a detailed overview of the heat transfer properties of the sample material.
-
R&S®Cable Rider ZPH - Rohde & Schwarz GmbH & Co. KG
The R&S®Cable Rider ZPH has all the essential basic measurement capabilities required for installing and maintaining antenna systems in the field. Its unique features ensure fast and efficient cable and antenna measurements and spectrum analysis. Two different R&S®ZPH models are available to suit different needs, a pure one-port cable and antenna analyzer and a two-port model with additional spectrum analysis and tracking generator features.
-
ST-2125 - Wuhan Sunma Technologies Co., Ltd.
ST2125 E1 Transmission Analyzer is a powerful handheld instrument, providing a scalable, future-proof solution for the testing needs of technicians involved in the installation and maintenance of E1 digital networks. It offers full-featured the error and alarm measurements you will need to verify quality-of-service in your networks. Plus, signal quality measurements including frequency, level, pulse shape, jitter and other functions ensure your costly, time-consuming work performed quickly and efficiently.
-
ShinewayTech
ShinewayTech® FSA-100 series 6GHz spectrum analyzer are widely used in 2G/3G/4G/5G etc. FSA-100 series have the industry's rare high receiver sensitivity performance with a minimum display average noise level of -165dBm/Hz. Power measurement dynamic range up to 100dB, maximum RF input power exceeds 27dBm. FSA-100 series are equipped with a 7" ultra-large capacitive touch screen (resolution 1024*600). Excellent user experience.
-
SafeTest 60 - Seward Medical
The Rigel SafeTest 60 is a robust, reliable and dedicated medical safety analyzer. It is ideal for testing high volumes of medical and laboratory equipment that does not require patient lead testing, such as beds, hoists, infusion pumps, CPAP's and centrifuges etc. With a large colour display and a colour-coded user interface, it's easy to select the required tests with a single key press, whilst a fast step-through of the test routine makes the testing process speedy and dependable
-
SPECTRO Analytical Instruments GmbH
To meet the divergent needs of industry, SPECTRO offers two families of optical emission spectroscopy metal analyzers with arc and spark excitation (arc spark OES). Optical emission spectroscopy using arc and spark excitation (Arc Spark OES) is the preferred method for trace metal analysis to determine the chemical composition of metallic samples. This process is widely used in the metal making industries, including primary producers, foundries, die casters and manufacturing.
-
CEA-100 - Walsn Enterprises Ltd.
Walsn CEA - 100 combustion efficiency analyzer is designed to continuously monitor CO content in flue gas while the measurement data can be used to adjust the ratio of fuel/ air so as to achieve the maximum boiler efficiency for boiler operation. Walsn CEA - 100 adopts the dual-measuring-sensor technology and features high accuracy with low zero drift and very small failure rate, matching the requirements of the harsh industrial environment. It is also easy to install and maintain.
-
MYeBOX Cloud - Circutor, sa
Designed for measurement and electrical parameters recording, MYeBOX incorporates the latest technology in portable measurement. This new analyzer incorporates wireless connections for full remote control. The latest wireless technologies applied to the robustness of CIRCUTOR's measuring devices. All you need to make accurate measures are MYeBOX flexible clamps. An extensive range of current clamps that allow you to measure any type of installation. MYeBOX is also compatible with other current sensor with standard connector and EEPROM.
-
PQPro - CANDURA Instruments
The PQPro™ is a portable 8 channel (4 voltage and 4 current) power quality analyzer that can stream high resolution waveform and RMS data to high capacity removable SD memory cards. Sampling rate can be adjusted from 64 samples per cycle to 1024 samples per cycle. The PQPro™ is in a rugged weatherproof enclosure that can be left recording in all kinds of environments - from the top of a utility pole to the bottom of an underground mine shaft!
-
Collins Aerospace
Pulse intercept and analysis lies at the heart of every ELINT or ESM system, extracting and converting signal energy into real-time data for analysis, emitter recognition and tracking. Collins Aerospace is a leader in providing real-time pulse analyzers that are designed to provide precision intercept and measurement of a broad range of radar signals in real-world signal environments. These units can be used standalone, as part of a Collins ESM or ELINT system, or as part of a system especially configured to address unique mission requirements.
-
DSLscope - Broadframe Corporation
DSLscope from Broadframe provides a cost-effective in-line ADSL/SHDSL Protocol Analyzer for monitoring and legal interception of DSL lines, trouble-shooting DSL line installations, and developing and testing DSL equipment. DSLscope plugs directly into the DSL line to be analyzed, connected in-circuit between the DSL Access Multiplexer (DSLAM) and a DSL modem (CPE). DSLscope provides a powerful protocol analysis capability for use in capturing, decoding and displaying all the ATM cells and AAL5 packets that are transmitted in both directions across a DSL line.
-
Shanghai Tarluz Telecom Tech Co., LTD
Adopting new techniques like advanced radio frequency and digital hybrid integration design, broadband and fundamental wave mixing, digital IF processing and intelligent power management, etc., The Cable and Antenna Analyzer has advantages of fast measuring speed, high measurement accuracy, small size, light weight, battery power, touch screen operation and adjustable backlighting. It can measure return loss, standing wave ratio (SWR), impedance, phase, DTF (discontinuity point fixing), etc.
-
Seaward Group USA
The combination and collaboration of our own and our users' experience means that Rigel's world-first biomedical testing solutions are fast, effective and easy-to-use. The development of the Rigel 288 is a case in point.The size and weight of most IEC60601 safety analyzers was an issue for users. Conventional wisdom stated certain size requirements for the design of products which deliver 25Amp earth bond current. Your field reports gave us a valuable insight into the need for something more compact and portable.
-
780D - Teledyne LeCroy quantumdata
The Teledyne LeCroy 780 series handheld test instruments for HDMI® are battery powered (except 780C, 780D and 780E), portable video and audio generators and HDMI analyzers that enable you to conduct quick, on-site verification testing and troubleshooting of your HDMI system and analog video displays. The 780 series instruments are equipped with both a reference source and a reference sink interface allowing you to test audio, video and protocols of any type of digital video device: sources, repeaters and sinks.
