Filter Results By:

Products

Applications

Manufacturers

Air

the atmosphere surrounding earth.

See Also: Air Quality, Atmosphere


Showing results: 1126 - 1140 of 1529 items found.

  • Aerosol Monitor

    DUSTTRAK DRX-8533 - TSI Inc.

    Real-time dust monitoring takes a giant leap forward! Only the DUSTTRAK™ DRX Aerosol Monitor 8533 can simultaneously measure both mass and size fraction - no other monitor can do both. The DUSTTRAK DRX desktop monitor is a battery operated, data-logging, light-scattering laser photometers that gives you real-time aerosol mass readings. It uses a sheath air system that isolates the aerosol in the optics chamber to keep the optics clean for improved reliability and low maintenance.

  • Aerosol Monitor

    DUSTTRAK DRX-8534 - TSI Inc.

    Real-time dust monitoring takes a giant leap forward! Only the DUSTTRAK™ DRX Aerosol Monitor 8534 can simultaneously measure both mass and size fraction - no other monitor can do both. The DUSTTRAK DRX handheld monitor is a battery operated, data-logging, light-scattering laser photometers that gives you real-time aerosol mass readings. It uses a sheath air system that isolates the aerosol in the optics chamber to keep the optics clean for improved reliability and low maintenance.

  • 10-Ch Pneumatics CAN

    YAV90PNE - 6TL Engineering

    The YAV90PNE is a complete “plug & play” pneumatics subsystem controlled by CAN, for ATEs with Virginia Panel receiver. Thanks to this module, pneumatics actuators that are commonly used in the fixture side of an ATE, can be controlled. 10 3-way micro-valves are able to contorl 10 simple effect actuators or else 5 double effect ones. The module includes input for the position sensors. A pressure sensor is also included, so that the system air mains working pressure can be set between a minimum and a maximum.

  • Probes For Non-Contact Ultrasonic Testing

    SONOSCAN CFC / CF - SONOTEC GmbH

    Due to the strong damping properties of air, low frequencies in the kHz range are used in air-coupled ultrasonic testing. It is therefore all the more important that the ultrasonic transducers offer a particularly high sensitivity in order to ensure high penetration and improved resolution. We achieve this, among other things, by installing preamplifiers in the receiver probe as well as by using our own Piezocomposite Technology, which enables a flexible use of the matching materials in our CFC and CF probes.

  • Flow Tester

    Laminar - ATEQ Corp.

    If you need high-quality air flow testers, you’ve come to the right place. We carry equipment for mass flow and leak testing, laminar flow, and continuous flow. You have the option of choosing touch screen or standard digital. All our equipment is compact and includes high-performing, state-of-the-art technology. Begin testing your equipment with our premium-grade flow testing equipment. Explore our amazing selection of flow testing equipment.

  • Analytical Gear Inspection Machine for Workpieces Up to  Ø 6,000 mm

    KNM X series - KAPP NILES Metrology GmbH

    machine structure with outstanding intrinsic accuracylarge bearing distances of guidesinherently stable granite machine base on active dampers to absorb vibrations ? no foundation requireddrive system close to center of gravitylinear motors in X-, Y-, Z- measuring axeshigh precision air- or hydrostatic bearing rotary tables (diameters from 500 to 1,800 mm) with direct drive and through holemotorized positioning of measuring column (V-axis) to the actual workpiece diameterlaser based system for safe operation

  • Coordinate Measuring Machines

    ScopeCheck® V - Werth Inc.

    Precise measurement of cylindrical workpieces (tools, shafts etc.) using application-specific sensors in a production environmentHeavy duty granite base with CNC air bearing rotary axisIntegrated vertical rotary axis for rapid measurement of diameters, planes, holes, and cutting and clearance angles with optical and tactile sensorsAll industry standard tool holders and chuck systems are available on the rotary axisUnique design allows easy integration of additional sensors for increased flexibilityProtected enclosure for measurement on the production floor

  • Direct Drive Motors

    Celera Motion

    The Javelin Series enables OEMs to design high performance, reliable, small and lightweight systems using flexible and easy-to-integrate linear motor components. The Javelin Series’ state-of-the art magnetic designs deliver high acceleration and high speeds in compact form factors. Direct drive technology and air core (ironless) construction provide good mechanical stiffness, low cogging and zero backlash, reducing settling times and increasing system performance and throughput.

  • Bluetooth Advanced Measurement System

    IQxel-M - LitePoint Corporation

    The new LitePoint IQxel-M™ Bluetooth Advanced measurement system is a major advancement in the speed and efficiency for performing over-the-air testing of Bluetooth Low Energy peripheral and beacon devices. Using LitePoint’s proprietary measurement techniques, testing Bluetooth devices has been made simple and the system performs comprehensive transmitter and receiver measurements in a matter of seconds. The solution is optimized for both engineering and manufacturing and works with all BLE peripheral and beacon devices, regardless of chipset.

  • SCR Rectifiers

    Carl E. Holmes Company

    SCR-controlled rectifiers are electronically controlled via analog signals for constant voltage and current control. The compact and service-friendly design complies with high industrial requirements and guarantees excellent operational reliability.The input voltage can be from 208 VAC to 600 VAC, 3 PH, 50/60 Hz. Maximum output voltage can be from 6 VDC to 600 VDC. Maximum output can be from 1000 Amps to 100000 Amps. These units can be air cooled, water cooled or oil cooled.

  • Towing Dynamometer

    RS-80K - Taylor Dynamometer, Inc.

    RS-80K towing dynamometer is designed fortesting Class B trucks and is the most full-featured, reliable and accuratetowing dynamometer in the industry. The RS-80K is built with a heavyduty steel frame, heavy-duty industrial axles and rides on an air ridesuspension. The RS-80K is designed to maintain 80,000 Newtons ofconstant drawbar pull and the ability to simulate an uphill slope of25%. The towing dyno uses absorbers with special high temperaturecoils powered by an industrial generator so there are no lead-acidbatteries to charge and testing is unlimited at low speeds.

  • Towing Dynamometer

    RS-90K - Taylor Dynamometer, Inc.

    RS-90K towing dynamometer is designed fortesting Class A trucks and is the most full-featured, reliable and accuratetowing dynamometer in the industry. The RS-90K is built with a heavyduty steel frame, heavy-duty industrial axles and rides on an air ridesuspension. The RS-90K is designed to maintain 90,000 Newtons ofconstant drawbar pull and the ability to simulate an uphill slope of25%. The towing dyno uses absorbers with special high temperaturecoils powered by an industrial generator so there are no lead-acidbatteries to charge and testing is unlimited at low speeds.

  • Towing Dynamometer

    RS-40K - Taylor Dynamometer, Inc.

    RS-40K towing dynamometer is designedfor testing today’s DOT Vehicles (Classes 5 and 6) which includetrucks and buses. The RS-40K is built with a heavy-duty steel frame,industrial axle and rides on an air ride suspension. The RS-40K isdesigned to maintain 40,000 Newtons of constant drawbar force andthe ability to simulate an uphill slope of 25%. The dyno uses eddycurrent absorbers with special high temperature coils. The poweris provided by an industrial generator. Testing is unlimited at lowspeeds.

  • Mask ventilation resistance and pressure differential tester

    WKS-3102 - Lisun Electronics Inc.

    Mask ventilation resistance and pressure differential tester is used to measure the inhalation and exhalation resistance of mask under specified conditions. Applicable to mask manufacturers, labor protection equipment inspection agencies to carry out related testing and inspection of mask products, mask breath resistance tester, breathing valve air tightness tester, breath resistance machine for measuring respirator and mask protection products in Inspiratory resistance and expiratory resistance under specified conditions.

  • Wind Sensors

    FT742 - FT Technologies

    The FT742 measures wind speeds up to 75 m/s. Its innovative design incorporates a series of “turbulators” which condition the air flow to deliver our highest levels of accuracy yet. Available in four mounting options, the Flat Front (FF) and Pipe Mount (PM) are typically used in wind turbine control and the Direct Mount (DM) in meteorological applications. The Surface Mount (SM) has been specifically designed for OEM integration and for use on UAVs/drones.

Get Help