Filter Results By:

Products

Applications

Manufacturers

Air Data

measures of piloting performance.

See Also: Air Data Test, Altitude, Pitot, Airspeed, Pitot Static


Showing recent results 61 - 75 of 113 products found.

  • Water Temperature Data Logger

    TidbiT v2 - Onset Computer Corporation

    Only 3x4 cm, this tiny data logger measures temperatures over a wide temperature range. The TidbiT v2 provides 12-bit resolution and has ±0.2 °C accuracy. It is designed for outdoor and underwater environments and is waterproof to 300 m (1000 ft). An optical USB interface allows users to offload data in seconds. Please note, a solar radiation shield is required to obtain accurate air temperature measurements in sunlight (RS1 Solar Radiation Shield, assembly required; or M-RSA pre-assembled Solar Radiation Shield).

  • Air Quality Instrumentation

    Sutron Corporation

    Air quality characteristics are quantified with instruments that provide numbers. With these numbers we can compare our environment against a standard and then seek improvement in environmental characteristics. We also can evaluate environmental changes over time. For example, a simple thermometer will tell us that air temperature in a dairy barn is 78°F, yet we know that dairy cows are most comfortable at 60°F or colder (assuming reasonable humidity level). Our goal would be to lower the temperature or compensate for the heat stress in other ways. This publication examines portable, hand-held, field-quality instruments commonly used to diagnose animal environments. It does not discuss instruments typical of ventilation system controls or those used to obtain experimental data.

  • Water Temperature Pro v2 Data Logger

    U22 Series - Onset Computer Corporation

    The HOBO Water Temp Pro v2 is durable with 12-bit resolution. Complete with a precision sensor for ±0.2°C accuracy, this logger measures temperatures between -40°C and 70°C (-40°F to 158°F) in air and up to 50°C (122°F) in water. Its waterproof, streamlined case allows for extended deployment in fresh or salt water. Moreover, the Water Temp Pro v2’s optical USB interface makes it possible to offload data even while the logger is wet or underwater. A solar radiation shield is required to obtain accurate air temperature measurements in sunlight (RS1 Solar Radiation Shield, assembly required; or M-RSA pre-assembled Solar Radiation Shield).

  • Humidity Indicators

    PCE Instruments

    On our website, you will find humidity indicators that can measure relative air humidity, or combined devices that can also These Humidity indicators measure different ranges of humidity depending on the model measure temperature. These humidity indicators measure different ranges of humidity depending on the model. Relative air humidity is an important factor in most sectors, including industry, transport and gardening. They are versatile in that they can take measurements, store them to memory and transfer data to a computer for further detailed analysis. There is also the calibration standards for the device which makes it easy to ensure that measurements are extremely accurate.

  • Pitot Static Tester / AoA TESTER

    ADSE 744 - ATEQ Aviation

    This tester was specifically designed for the new-generation pitot tubes that integrate sensing probes, pressure sensors and powerful air data computer processing to provide all critical air data parameters including Pitot and static pressure, airspeed, altitude, and angle of attack. This Pitot Static tester is designed primarily for flightline use to cover the testing of all barometric and manometric pressure instrument systems. The AoA Channel behaves as a second Ps channel, in order to create a differential pressure between the 2 Ps Channel, allowing to performsimulations of different Angles of Attack. The large touch screen display, with on-screen help, enables all checks to be carried out easily on the flight deck or in the cockpit, by a single operator. The ADSE 744 is robust and housed in amobile weatherproof case. An attached bag contains the pressure hoses and electrical cables.

  • Duct Transmitters

    ASENSE SERIES - Automation Components Inc.

    The ASENSE room and duct transmitters monitor the carbon dioxide (CO2) levels in industrial, school, and office type environments. The concentration of CO2 is a strong indication of the overall indoor air quality. The ASENSE Series is based on a single beam non-dispersive infrared technology, and is a cost-optimized solution for the climate control of buildings and other processes. In addition, ABC software eliminates the need for manual calibration. The ASENSE Series measures the CO2 concentration in the ambient air up to 2,000 ppm and converts the data into an analog output. This data can be used in conjunction with a Building Automation or Demand Control Ventilation System. This decreases energy consumption while creating a healthier indoor climate. Units feature an analog temperature output (-4 to 140F) and come with combined output options of 0-5 VDC or 0-10 VDC and 0 to 20 mA (4 to 20 is field selectable via an onboard jumper.

  • Precision Continuous Flow Metering + Dispense System

    Graco Dispense Analyzer - Graco Inc.

    A whole new level of precision for drivetrain gasketing. Detect air bubbles and defects you couldn't see before. Track critical measurements, including entrapped air. Quickly and easily find a defect's root cause. Avoid expensive problems by responding sooner. Save millions: Contain warranty claims and recalls. The Graco PCF and Analyzer combination: Your ultimate system for accurate, reliable dispensing. The new Graco Dispense Analyzer is a monitoring system capable of detecting the tiniest air bubble or error during adhesive dispensing. Paired with the Graco Precision Continuous Flow (PCF) system, the Analyzer monitors your dispense in real time, detecting immediately if conditions are off and may potentially compromise your final product. With the ability to respond immediately, you can avoid defects that lead to costly recalls. The Analyzer stores the signature of each dispense, giving you the ability to replay the data, even months or years after the actual dispense. Seeing the data replayed as if in real time, you can more easily pinpoint the root cause of the defect and contain a recall or warranty claim to only those products that were affected.

  • Special / Customer Spec. Crates

    6U VME64x 4500 - W-IE-NE-R, Plein & Baus GmbH

    The WIENER VME 4500 crate series is a compact new generation of 19" integrated packaging system with frontal cooling air intake for standard VME64x bus systems with 6Ux160mm cards. Designed primarily for applications in data acquisition, control and test instrumentation it combines superior mechanical quality with lowest noise power supply technology.

  • Special / Customer Spec. Crates

    6U VME 4500 - W-IE-NE-R, Plein & Baus GmbH

    The WIENER VME 4500 crate series is a compact new generation of 19" integrated packaging system with frontal cooling air intake for standard VME/VME64 bus systems with 6Ux160mm cards. Designed primarily for applications in data acquisition, control and test instrumentation it combines superior mechanical quality with lowest noise power supply technology.

  • Carbon Dioxide Meters

    PCE Instruments

    In this category you will find an overview of our carbon dioxide meters which are especially made for the Carbon Dioxide Meters determination of the carbon dioxid content in the air. These carbon dioxide meters warn optically or acoustically when the carbon dioxide content is critic (depending on the model). Moreover, some models support the function of switching relays when an adjusted value is exceeded. This function can help with the automatic conditioning of rooms. The auto calibration function of some carbon dioxide meters makes an easy calibration of carbon dioxide meters possible. Some models support the function of data storage and further data transfer of measuring results to a computer.

  • PC Based High Current Test Set for Circuit Breakers and Temperature Rise Test Equipment

    SCR ELEKTRONIKS

    This equipment comprises of high current source for testing of circuit breakers with additional facility for temperature rise testing (thus incorporating testing for moulded case, vacuum & air circuit breakers as per IEC 60947-2). The system integrates a servo controlled source with closed loop current feedback to maintain the current constant. It has the necessary instrumentation for maintaining current at full load & other conditions arising in testing at high current. The bench has a PC based control system with temperature data logger (24 channel with ch-ch isolation amplifiers). The data logger displays as well as stores a set of temperature values with time.

  • Continuous Emission Monitoring System

    CEMS - Shimadzu Corp.

    were historically used as a tool to monitor flue gas for oxygen, carbon monoxide and carbon dioxide to provide information for combustion control in industrial settings.[1] They are currently[when?] used as a means to comply with air emission standards such as the United States Environmental Protection Agency's Acid Rain Program,[2] other federal emission programs, or state permitted emission standards. Facilities employ the use of CEMS to continuously collect, record and report the required emissions data.

  • Anemometers

    Sper Scientific

    Sper Scientific offers a wide selection of anemometers for directly measuring wind and air velocity. They will tell you all you need to know about the speed of the wind, the temperature, even humidity and heat stress information. The extraordinary range of uses that our meters provide have made them required equipment in a wide range of professional settings. Firefighters, farmers, HVAC technicians and military personnel all over the world use these meters to gather accurate, real-time data.

  • Antenna Measurement Software

    Raymond RF Measurements Corp.

    Raymond RF's Antenna Measurement Software performs 2-D (polar/rectangular) and 3-D (spherical) antenna pattern measurements for passive antennas and active wireless mobile stations (cell phones). Insertion loss of passive devices is included as part of the calibration component. Data management and reporting of antenna properties such as half power beam-width, directivity, gain, radiation efficiency, total radiated power, and total isotropic sensitivity. AMS performs and reports all measurements required by the CTIA Over-the-Air Performance Test Plan.

  • Antennas

    Elbit Systems of America®

    Elbit Systems of America’s antenna product line offers ruggedized, field-proven, military communication solutions for air, sea and ground operations. These advanced antennas deliver high performing, continuously connected voice, video, and data communications. Our technologies support high up/down-link rates and make our antennas ideal for fixed and maneuver units. Each system is designed to be fully integrated with most broadband satellite communication systems.